日期：2014年8月5日

240V 18W LED Oyster Light Square

240V 18W LED Oyster Light Square

The 240V LED Oyster Light incorporates 240 Epistar chips in a higher powered 18 watt configuration producing 945-980 lumens total light output. With an expected lifespan of 50,000 hours, CLA LED Oyster Lights from Clear Light Australia, complement a full range of architectural styles from antique to ultra-modern, at the same time reducing maintenance costs.

240V 18W LED Oyster Light Square Specification:

  • Slim modern styling, Flicker free start
  • Output: 945 lumens (Warm White 3000K), 980 lumens (Cool White 4000K)
  • Epistar SMD3528 LED x 240pcs, 18W
  • Expected LED chip lifetime: 50,000 hours
  • Powder coated iron plate base, acrylic cover & frosted aluminium trim
  • LED driver included
  • IP rating: IP20
  • Not suitable for use with dimmers
  • Dimensions: 275mm x 275mm x 72mm, Cutout 248mm

D900+ 16W Dimmable LED Down light

D900+ 16W Dimmable LED Downlight The brand new LED downlight from Brightgreen allows full customisation of the look and feel of their flagship product, the D900. D900+ 16W Dimmable LED Downlight Specification:

  • Fitting/Base: Complete fitting and housing
  • Gimble Angle: 25 Degrees
  • Hole Cutout: 92mm
  • Wattage: 15.6W
  • Voltage: 240V AC (external LED universally dimmable driver)
  • Beam Angle: 55 Degrees
  • Light Colour: Warm White 3000K
  • Lumen Rating: 955 lm
  • Light Quality (CRI): 95+
  • LED Life Span: 70,000 Hours
  • Dimmable: Yes
  • Warranty: 7 Years Luminaire, 5 Years Driver

Features:

Customisation without compromise- Create a seamless look by installing the D900+ trimless, or achieve a more expressive result by attaching one of a range of interchangeable fascias using a simple twist-on, twist-off mechanism. (Interchangeable fascias are due later this year)

More versatility, less heat loss- Direct light where you want it with 360∞ gimballing. The D900+ incorporates a newly designed recessed universal gimballing system, offering unlimited lighting versatility while preventing heat from escaping into your roof.

Maximise colour, tone and detail with Tru-Colour 95CRI illumination- The D900+ combines our signature high-quality light with exceptional efficacy, bringing your interiors to life while using less energy.

Brilliant brightness- The D900+ emits up to 1060 lumens of brilliant Tru-Colour 95CRI light, surpassing the brightness of equivalent halogen and LED downlights.

Low energy- Running on just 15.6W of power, the D900+ uses very little energy, meaning lower power bills and a happier planet.

Super-efficient- A superb average efficacy of 61 lumens per Watt means more illumination using less energy.

Life-long endurance- With an expected lifetime of 70,000 hours ñ 30 years with average daily use ñ the D900+ is built to last.

Unbeatable warranty- The D900+ is covered by an unbeatable warranty: 7 years for the luminaire and 5 years for the driver.

The right angle- The D900+ downlight is available in a 55 degree beam angle that casts an even spread of light in a rounded cascade.

Pure Aluminium- We use only pure aluminium for higher quality and increased durability.

Dimmer compatible- The D900+ is dimmable right down to 3% and is best used with Clipsal universal or trailing edge dimmers to ensure smoother, flicker-free dimming.

BR180 2.5W LED G9 240V Capsule Bulb

BR180 2.5W LED G9 240V Capsule Bulb

The Brightgreen BR180 2.5W LED G9 Capsule lamp is a direct replacement for 30W halogen G9 bi-pin bulbs. 

With a very similar form factor as the traditional halogen bulbs the BR180 is designed to fit into virtually all existing fixtures whether it be in a desk lamp, pendant or spot lights.
 
Being LED the operating temperature is no more than a hot cup of coffee, making it safe to use in fixtures that would otherwise be extremely hot to touch.
 
With an estimated life span of 30,000 hours it completely removes the painful task of replacing lamps constantly.

BR180 2.5W LED G9 240V Capsule Bulb Specification:

Input Voltage – 240V
Power Consumption – 2.5W
Connection – G9 Bi-Pin
Dimmable – No
Lumen Output – 180lm
Efficacy – 72lm/W
Light Quality – 83 CRI
Beam Angle – 200 Degrees
Lifespan – 30,000 Hours

1.2W G4 12V LED Capsule Globe

1.2W G4 12V LED Capsule Globe

The Brightgreen BR80 1.2W LED G4 Capsule lamp is a direct replacement for 10W halogen G4 bi-pin bulbs. 

Comprising of very high efficiency LEDs the BR80 delivers a soft warm glow in a wide 200 degree beam with luminous efficacy of 67lm/W.

With an estimated life span of 30,000 hours it completely removes the painful task of replacing lamps constantly.

1.2W G4 12V LED Capsule Globe Specification:

Input Voltage – 12V
Power Consumption – 1.2W
Connection – G4 Bi-Pin
Dimmable – No
Lumen Output – 80lm
Efficacy – 67lm/W
Light Quality – 83 CRI
Beam Angle – 200 Degrees
Lifespan – 30,000 Hours

Buy LED strip lights with Caution

There are a lot of LED lights with customer demand is not conventional specifications, is the need to custom. But because not familiar with some of the technical parameters of LED lights, so there is a lot of demand is obviously not meet the technical requirements, even if made ??out of their use will also be affected. Here to talk about the three special note about LED lights with special custom order for the purchase of customer reference:

Buy LED strip lights with Caution

　　1, LED lights with circuit design:

LED lights with the circuit comprises a series circuit and parallel circuit, there is a series-parallel circuit.

a. advantage is that the series circuit of constant current, relatively easy to control the LED drive current. The disadvantage is that if one LED is damaged, then all the LED will not light, but it will not affect other LED life.

b. advantage of the parallel circuit is that any one LED does not affect a bad use of the other LED. The disadvantage is that if you do not add the current limiting resistor, then any one LED is damaged, it will cause the other across the LED current is increased, it will burn the other LED. And because a single LED driving voltage is low, the voltage will cause most to do useful work for is a waste of resources.

c. series-parallel circuit is a circuit LED lights with GM, because the use of several LED in series along with a group, and then other groups in parallel. You can maximize the utilization of the supply voltage, reducing wasted effort loss. Meanwhile, the use of several LED in series, can guarantee these LED drive current is the same, constant current LED beneficial to ensure that the service life of LED. After a series of LED lamps and other groups and then in parallel, you can guarantee if a group of damaged, will not affect the normal use of other groups. Also, because each has a current limiting resistor, therefore, not because of damage to a group which affect the life of the other groups.

　　2, LED lights with LED quantity per meter:

Typically, LED lights with LED quantity per meter is fixed. For example, 1210 is the 60 lights, 5050 was 30 lamps, special lamps is 60. If there are other special requirements, such as 50 lights per meter, which involves you want to modify the circuit. Because usually three LED a group, if it is 50 light, it would become a group number is not enough, but if a group into two LED, it would increase the current limiting resistor, this will result in a waste of resources . So, do the special requirements of custom LED lights, be sure to pay attention to the number of lamp beads is a multiple of 3, so as not to cause voltage waste of resources.

　　3, LED lights with cut position:

Generally, a cut is made ??in each location. But some customers will require a single LED as a cutting position, so that is unreasonable. Because in that case would be tantamount to a parallel circuit, for the life of LED lights is nothing guaranteed.