INTRODUCING 2015 New SERIES LED Grow light

This Light has 9 Modules with Mixed Array LED’s, each Array has 25 High Quality/Output 3W LED’s

INTRODUCING 2015 New SERIES LED Grow light

Dimensions :  42 cm Wide x 42 cm Deep x 7.5cm Deep LED grow light

Weight : 8Kg

Area Covered:  5 Feet x 5 Feet (24 Inches) 6ft x 6ft at  (36 Inches)

Comparison: Tested PAR output & Penetration matches that of a 1000W HPS

INTEGRATED LED’S

Integrated LED’s are functionally the same as their traditional counterparts, but rather than individually cased LED’s they are miniaturized and combined into single, multiple-spectrum arrays. This brings considerable advantages in thermal dissipation, creating a positive effect on lifetime; reliability and allowing us produce lamps that enter the next power-factor.

The High Powered 3 Watt LED’s are carefully selected from LED Manufacturers such as Bridgelux, Cree and Epistar and thoroughly quality checked before leaving the factory.

The spectrums we use are 440nm, 460nm, 610nm, 630nm and 660nm & IR. Even though this spectrum is the currently the best we are always looking for new discoveries in fine tuning wavelengths and spectrums which could mean more newer spectrums may be available in the future. These units are fully upgradeable as well.

Features:

  • Free Hanging Kit & Power Lead 
  • 5 Years Total Peace of mind Warranty
  • 5 years Technical / after sales support
  • 90 days money back guarantee
  • From a UK based Company – no long waits for units/parts or repairs
  • Instant Communication at all times.

 HEAT MANAGEMENT

Whilst being hugely more efficient than other methods of turning energy into light, 100% efficiency is impossible. Therefore LED’s do generate some heat output and this needs to be adequately dispersed away from the LED chips themselves. Note also that LED’s spectral output is affected by the chip running temperature. The bottom line is : the better the heatsinking and thermal management, the better the long term stability and reliability of the LED grow light.

Each Helios module has the mixed array LED hand soldered onto a metal core printed circuit board [PCB], These are the best component boards you can get for LED’s, specifically designed and produced by our own team of engineers.

Mounted On top of these are dual core, double plated heat sinks for superior cooling.

The efficient heat transfer paste is also carefully selected and tested thoroughly for its best heat dissipation from the LED diode to Heatsink

The whole internal components & Heat sinks are kept cool by high speed quiet ball bearing fans.

The only slightly warm air that comes from this unit is generated from exhaust from inside the unit from the heat sinks which are designed to transfer heat away from the rear of the LED diodes themselves. The fronts of the lights are slightly warm to the touch. So heat generation is almost Zero. This also helps the

  Residual Humidity inside the area.

From Germination to Flowering, this LED is very capable of creating BIG yields, Big dense flowers and fruit and has been proven over and over again.

 

Eco-friendly Recessed LED downlight

Eco-friendly Recessed LED downlight

Eco-friendly Recessed LED downlight Specification:

  • Light sources: 90 x Epistar SMD LEDs.
  • LED color: cool white, neutral white and warm white.
  • Lumen output: warm white 602lm, neutral white 608lm, cool white 619lm.
  • Power consumption: 10W.
  • Input voltage: AC100-240V.
  • Beam angle: 105 degrees.
  • Operating temperature: -20 to 55 degrees Celsius.
  • Equivalent to 90W halogen lamp.
  • Size: 200 x 200 x 12mm
  • Weight: 900g.
  • LED driver: included

Eco-friendly Recessed LED downlight Features:

  • Outlined is a recessed LED downlight that provides an elegant and contemporary look in your interior design.
  • The eco-friendly LED downlight illuminates with high luminous efficacy while the frosted shade helps reduce unwanted direct glare.
  • This graceful downlight is a great light source for hallways, conference rooms, showcases, etc.

Install:

  • Switch off the power
  • Hold drilling and mount the ceiling light into the correct position
  • Connect to power supply
  • Swich on the power

Status of Smart LED bulb

Smart LED bulb is a new concept of intelligent home with LED lighting collision resulting dimming LED Bulb products. The rapid development of LED products in these few years, no doubt the future will be a culture room lighting LED lighting design, and also toward humanization, energy and health of personalized art in direction. The ubiquitous Wifi (Internet) that can communicate anytime, anywhere interactive features will inevitably affect the development and changes of LED lighting products. Smart Bulb embedded networking core technology, the exchange of core modules embedded LED bulbs, interactive software system services into handsets, introducing daily life, relying on cloud services platform support, constitutes a handshake indoor lighting and electronic equipment Links, full of wisdom and social intelligent LED bulb system, has become a dark horse in the field of intelligent lighting and even LED lighting field, it is not a simple room lighting the traditional sense, illuminate everyone in daily life, but also each person represents a unique approach to life, which must be the history of the development of LED lighting and smart home development in the history of a revolution could not be ignored.

Status of Smart LED bulb

  Smart LED bulb energy saving environmental health

LED is a cold light source, is considered to be the fourth generation of green light, from a fundamental sense in terms of semiconductor lighting itself without any pollution to the environment, in the same brightness, LED bulb power consumption of only ordinary incandescent 1 / 10, fluorescent tubes 1/2, compared with incandescent, fluorescent, energy-saving efficiency can reach 90%. LED bulbs to replace the current 50% of traditional lighting, the annual electricity savings of an equivalent sum of Three Gorges power plant generating capacity, its energy-saving benefits are substantial.

  Internet integration

Smart LED bulb is added to the embedded networking communication module can be achieved within a certain area of Internet access, while users of smart phones and cloud services platform is turned on, so that the user can at any place at any time by phone View job status LED bulb at home, including brightness, color temperature, and electrical parameters, while users can also connect via smartphones or computers according to their preferences for home state LED bulb remote control; another aspect for installed a multi-room set of intelligent bulb, smart bulb during normal working time dynamically scan other smart bulb, and automate ad hoc network control, allowing the user to their own bedroom scene lighting scenes to be defined users can even use a cell phone or digital camera to photograph the color settings to the intelligent lighting inside the room, for example, can be used to simulate the irradiation of light environment during sunrise and sunset.

  Smart LED bulb defects

Smart bulb is now one of the hottest smart home products, but also many families will choose the entry-level smart home products. The developer’s intention is clear: using a mobile phone to control the light switch, the other can achieve color, even to achieve linkage operation with other sound systems and other products.