月份：2016年3月

T7 Candelabra 2W High Power LED Bulb

T7 Candelabra 2W High Power LED Bulb

This indoor LED filament bulb is designed for bistro lights, large tents, decorative wedding lights, decorative light strands, commercial light strings, chandeliers, ornamental fixtures, or for any decorative application that accepts T7 candelabra LED bulb types with E12 bases. The bulb can produce up to 80 lumens of cool white (6100K) or warm white (2900K) illumination. The energy-efficient bulb uses only 1.5 watts of power; an incandescent bulb with comparable light output would consume 10-15 watts. This bulb has 120V AC operation and is designed to last 30,000 hours—25 times longer than incandescent bulbs. Price per bulb or 6-pack.

T7 Candelabra 2W High Power LED Bulb Specification:

Base Type E12 (Candelabra) Beam Angle 360 degree
Bulb Type T7 Comparable Wattage 10-15 Watts
Dimmable No IP Rating Non-Weatherproof
LED Lifetime 20000 Hours LED Quantity 21 LEDs
LED Type 2821 SMD Operating Temperature -20~+45 °C
Oversize No Standards And Certifications RoHS Compliant
Total Power Consumption 1.5 Watts Operating Voltage Range 120 VAC

T7 Candelabra 2W High Power LED Bulb Features:

  • 21 x White SMD LEDs
  • 360 Degree viewing angle
  • 80 Lumen

Application:

  • LED replacement bulb for traditional Candelabra base bulbs
  • For brighter night lights
  • Chandeliers and decorative lamps for low light applications

OSRAM LED chip production line will be extended

According to the policy Osram publicly, to the 2020 fiscal year, to achieve chip revenue outdoor lighting and other general lighting applications, double the current proportion, which is increased to about one-third of GDP. LED chip production line expansion, in addition to lower costs, but also allows the operating profit of the semiconductor business in the medium term to maintain an average level can be more than 15%.

OSRAM LED chip production line will be extended

Osram was announced before Lang to spend 3 billion euros, about $ 3.3 billion of the amount in research and development, as well as in Southeast Asia, Malaysia base Kulim to build a new 6-inch LED production line, but the majority of investors do not like the decision, there were presents considerable shares fell.

Aldo Kamper think, automotive LED lighting elements and electronic industry needs, compared with the lighting of the LED chip, the former is still relatively high gross margins, but he estimated sales of lighting will increase substantially when the larger shipments OSRAM out to the LED chip cost will be decreased lighting applications, for special lighting market OSRAM has developed and specialization, will have a better profitability.

OSRAM LED element has also invested wearable device applications, for measuring the amount of blood vessels within the state to monitor the heartbeat, which is a integrated optical conductivity sensors, for Osram, this is a relatively high margin photoelectric products. OSRAM also made famous wisdom bracelet maker Fitbit orders, the built-in high-margin products such wisdom bracelet products, the future also have the opportunity to expand business opportunities health and fitness area.

8 Foot LED Surface Mount Ambient Light Fixture

8 Foot LED Surface Mount Ambient Light Fixture

The 8′ (2438mm) luminaire is available with 8000 lumens in 3500K, 4000K and 5000K color temperatures. The LED TUBE sleek and compact architectural design with flexible lumen packages, color temperatures and standard 0–10V dimming make it ideal for surface ambient applications in both new construction and upgrade applications.

The LS Series’ flexible mounting allows for individual mount or continuous row applications for surface mount, suspended mount, pendant mount and cove installations.

8 Foot LED Surface Mount Ambient Light Fixture Specification:

  • Cree TrueWhite® Technology
  • Delivered light output: 8000
  • Input power: 88 watts
  • LPW: 90
  • CRI: 92
  • CCT: 3500K, 4000K, 5000K
  • Input voltage: 120 – 277 VAC; 60 Hz
  • Limited Warranty: 10 years
  • Dimensions: L 96″ (2438mm) x W 2.5″ (64mm) x H 3.0″ (77mm)
  • Designed to last 50,000 hours
  • Mounting: Surface, suspended, pendant, cove

 

The United States Waukesha High School replacement LED lamps

US Waukesha South High School is a historic school, opened in 1957. The school was rebuilt in 2005, the swimming pool equipment for the Department of Physical Education High School, the school swim team and Waukesha Express swim team use. The new swimming pool can accommodate nearly 2,000 spectators, the pool area is 25 yards × 30 meters and larger than most schools.

The United States Waukesha High School replacement LED lamps

Initially swimming pool using a metal halide lamp indirect lighting system, carried by the light reflected from the surface of the ceiling in order to reduce glare. For years, metal halide high heat makes swimming ceilings and walls black, light levels and damage to the lamp so that the swimming pool deteriorating atmosphere dark, and difficult to replace. Waukesha School District master electrician Tom Cherone said: “As the lights dimmed, the audience complained that they can not see the game swimmers; dim light work of lifeguards also had an impact; and carry out maintenance on metal halide lamp, If the glass falls into the pool, we need to completely empty the pool of 480,000 gallons of water, very troublesome. ”

Most importantly, the metal halide lamp technology requires 10-15 minutes of cooling time before re-lit, this means that you must make before the next light bulb lit completely cooled, it is also very easy to use, and caused a huge power waste.

Now, with the Waukesha School District has established long-term cooperative relationship, Wisconsin Hein electricity supply company, Tom Cherone learned can be retrofitted to existing lighting systems by LED High Bay Light, to improve lighting quality and safety performance, while reducing energy cost and consumption. Therefore, one replacement, Cherone the swimming pool of 42 1000-watt metal halide and 8 fluorescent tube lighting were replaced with 240 watt LED high-bay lights and 80-watt LED High Bay Light.

“The new lighting great performance,” Cherone said: “They quickly lit, higher than the old metal halide lamp brightness and long life, but also cost-effective now all add up to more than the original metal halide lamps can save. More than 70 percent of the energy, surprising. “And a lot of heat they emit less than the metal halide lamp, a school can save air-conditioning costs in the summer, which further reduces the energy consumption.

Because LED lamps reduce maintenance community lighting equipment and for energy efficiency, significantly improved lighting quality, Cherone has plans to pool metal halide Waukesha Area All schools are replaced with LED high-bay lights up.

In addition to upgrading the swimming pool lighting, exterior lighting district is implementing a plan for the school parking lot, in addition to saving more money, most importantly, through better lighting environment to enhance the security of the school.

Shangrao City Street facelift hundred LED lights

Shangrao City Street facelift hundred LED lights

December 29 in the afternoon, the author understands from yiyang open a pedestrian street directors resistance, after more than a month of preliminary upgrade, has been increased to pedestrian street paved street lamp off completely, and reinstall the LED energy-saving lamps.At present all lines connected, ensure that all light up 2016 New Year’s day.

We have learned, pedestrian street previously installed more than 90 incandescent lamp, single color and power consumption, short service life.All this into a new type of high 4.5 meters, has a long service life, high brightness, low consumption, good seismic performance LED lights.After upgrading the LED colour diversity, more pedestrian street at night, form new streets landscape effect.

7 Watts Inch LED Adjustable Downlight

7 Watts Inch LED Adjustable Downlight

7 Watts Inch LED Adjustable Downlight mounts into most recessed can lights and pot lights, Fully dimmable with many standard dimmers, highly energy efficient, Energy Star approved, perfect for kitchens, hall ways and any other room where a down light currently exists.

7 Watts Inch LED Adjustable Downlight Specification:

REPLACEMENT FOR: 4″ DOWNLIGHT
BRIGHTNESS (LUMENS): 400
COLOR TEMPERATURE: 2700K
COLOR ACCURACY (CRI): 80
TRADITIONAL WATTAGE EQUIVALENT: 50 WATTS
POWER CONSUMPTION: 7 WATTS
VOLTAGE: 120 VOLTS
DIMMABLE: YES
MOISTURE RATING: DAMP
FIXTURE RATING: OPEN / NOT FULLY ENCLOSED
BASE TYPE: E26
ENERGYSTAR QUALIFIED YES
Dimensions / Additional Data
BULB DIAMETER: 5 IN
MAXIMUM OVERALL LENGTH: 3.2 IN
CERTIFICATIONS: UL
PRODUCT/ORDER CODE: 53116102
Lifespan / Cost To Run
PROJECTED LIFE:
@3 HRS/DAY		 35,000 HRS

2020 global lighting market will reach 110 billion euros

Lighting market because of its emissions reduction effect and new factors such as the LED, OLED participate in focus, however, the lack of on a global scale, the whole point of view contains across all key department and application, geographical factors, light source technology and value chain at different stages of comprehensive report.In order to make up for the shortfall, McKinsey, a consultancy, authorized by osram, drafted an independent perspective to report the evolution of the global lighting market and its possible future.

2020 global lighting market will reach 110 billion euros

In order to for a comprehensive overview of the development of the global lighting market, including LED market share forecast for the future, McKinsey for global lighting experts and consumers were investigated, including seven different countries (the United States, Germany, Japan, China, Russia, Brazil and India).

The report shows that the global lighting market is expected to reach 110 billion euros in 2020 – the equivalent of the global TV market. Global population growth and urbanization are the main factors to improve the overall demand of lighting products, urban and climate change issues are also driving more energy-efficient lighting products, governments around the world for energy efficiency regulation accelerated the development of the lighting industry.

Today, the advent of human history –LED fourth revolution in lighting technology are transforming the technology industry. Although, LED technology has not achieved more price advantage, but from a large number of investment companies can be expected to grow at an annual rate of 30 percent reduction in manufacturing costs, LED is becoming a common technique widely affordable.

Reports show that the estimated global LED lighting market revenue will grow at an annual rate of 30%, to 2020, the income of the LED lighting market will be close to 65 billion euros, with nearly 60% of the share in the global lighting market.

19 Watt 4 Foot T12 LED Tube Light

19 Watt 4 Foot T12 LED Tube Light

19 Watt 4 Foot T12 LED Tube Light  is designed to perform efficiently in places where old-fashioned fluorescent lamps had been used including T8, T10 or T12. Our T8 LED tubes incorporate integral drivers, so out-moded failure-prone fluorescent ballasts are eliminated. Lighting systems are simplified. Forest Lighting T8 LED Lamps connect directly to line voltage for easy installation and are offered in two lengths and four color temperatures.

19 Watt 4 Foot T12 LED Tube Light Specification:

REPLACEMENT FOR: T8, T10 , T12 4 FOOT FLUORESCENT TUBE
BRIGHTNESS (LUMENS): 1900
COLOR TEMPERATURE: 4100K
COLOR ACCURACY (CRI): 80
DIMENSIONS 1.02” X 47.2”
POWER CONSUMPTION: 19 WATTS
VOLTAGE: 120-277 VOLTS
DIMMABLE: NO

 

 

 

 

 

 

 

19 Watt 4 Foot T12 LED Tube Light Features:

  • 19 watt Low Power and High Performance
  • 1900 Lumens Output
  • C-UL-US E349551 Certified
  • UL-US E347350 Certified – LED tube and Internal driver system
  • Rated Lifetime: 35,000 hours
  • Opaque Frosted Lens to Mimic Traditional Fluorescent Tube
  • Easy, fast & safe installation: wire to one endcap
  • Design Lights (DLC) Qualified Rebate Ready

LED lighting lit Sun Life Stadium

Eaton’s acquisition of Ephesus lighting company will newly renovated home of Miami Dolphins Sun Life Stadium offers LED lighting. Compared to previously installed systems, Eaton expects LED lighting system will reduce to 75% of electricity for lighting.

LED lighting lit Sun Life Stadium

“Miami Herald” published an article pointed out that as part of up to $ 425 million, “the Miami Dolphins stadium reconstruction project”, the lighting installation will install a sun roof in the offseason. The reconstruction project is expected to be completed in 2017.

Eaton said that compared to the previous lighting system, Ephesus lighting system many light. Advantages Ephesus lighting system further comprises: a low-glare surface more uniform light, and no warm-up time.

2014 Arizona Cardinals became the first use of LED lighting systems NFL team.

It is reported that the new ball Minnesota Vikings stadium under construction is also expected to adopt Eaton LED lighting.

HV LED chips to create high-efficiency lighting era

Traditional DC LED chips work at high current low voltage, to enhance the use of voltage, generally use integrated package (COB) structure, namely multi-chip series and parallel. Although the LED lighting applications still DC drive for the bulk, but the technology via AC / DC conversion after driving energy lighting, not only increases the cost of the application, but also increases the complexity of the product, and the overall energy efficiency is reduced.

HV LED chips to create high-efficiency lighting era

HV LED directly at the chip level to achieve a series-parallel micro grains to work in a low-current high-voltage, will simplify chip solid crystal, bonding quantity, packaging costs. HV is the formation of multi-chip integrated in the fine crystal particles per unit area, to avoid the inter-chip BIN wavelength, voltage, brightness, consistency and other problems caused by the span.

In recent years, LED lighting design simple and prefer light and thin, high-voltage chip and its flexibility, diversity and low cost and other advantages as optimistic about the market.

Compared with the traditional DC LED power chip, HVLED chip packaging with low cost, high efficiency warm white, driving high power efficiency, low line loss advantage. 1WDCLED a conventional drive chip 350mA, the voltage is about 3.4V, the voltage is set again 220V, need to use 60 to 70 chips, and the current reaches about 2 × 104mA, at room temperature which requires the use of a voltage adapter reduce the amount of current. And a chip HV current 20mA, voltage of 50V, the test constant voltage 220V, 4 ~ 5 chips, current 100mA or less, the transformer can be omitted, save costs and improve the consistency of the chip.

It can be seen, the same output power at high voltage LED power dissipation work is far lower than the low-voltage LED, which also means cooling aluminum housing costs can be greatly reduced. According to the current product, the manufacturing cost of high-voltage chip 10% to 30% less than the cost of low pressure.

High-voltage chip cost savings in many ways. High-voltage chip can not only reduce the cost of the peripheral driver circuits and transformers, but also save process costs. Further, since the step-down transformer low-voltage chips use the process will lose energy, high voltage chip is no energy loss can be further improved luminous efficiency.

With the technical problems of breakthrough high pressure chip market is expected to become the future mainstream chips, but its technical difficulty and craftsmanship itself has also made many companies daunting. However, with the popularity of reduced future, research and development costs of high-voltage chip, HVLED chip itself has a cost advantage of high voltage chip prices will also be further reduced.