Literacy of 3528 SMD LED soft strips

3528 SMD LED soft strips are a type of commonly used decorative lighting application that use LED as light source, FPC circuit board as carrier, series connected with current limiting resistors. They have following advantages: high brightness, soft and bendable, can be cut into length that wanted.

 

3528 SMD LED soft strips are a type of commonly used decorative lighting application that use LED as light source, FPC circuit board as carrier, series connected with current limiting resistors.

 

The light source of 3528 SMD LED soft strips is 3528 LED chips, using soft FPC board as carrier, namely flexible printed circuit board. The general width of this board is 8mm, thickness is no more than 1mm. Two or several FPC boards can be weldingly connected together. Finished 3528 LED soft strips with length of 5M (per roll), carried by anti-static discs and anti-static bags , easy to transport.

 

3528 SMD LED soft strips can be divided from the following aspects:

  1. Color: colors for FPC board are yellow, white and black; colors for LED lamps are white, warm white, red, yellow, blue, green and purple.
  2. Waterproof grade: LED strips can be used in different positions. Thus the waterproof grade can be divided into non-waterproof, epoxy waterproof and casing waterproof.
  3. Lamp beads: FPC can be attached with many 3528 LED Tunnel Light  chips. There are three regular specifications: 30 units per meter; 60 units per meter; 120 units per meter, applying to places with different brightness requirements.

 

3528 SMD LED soft strips can be used in widely places, product showcase, storefront decoration, super-thin light boxes backlight, hotel/KTV decoration, outdoor lighting applications, home ceiling lights, ceiling entrance decoration.

 

By using 3528 SMD LED chips, 3528 LED strips have high brightness, low power, long service life, easy to install, flexible in customization, easy to transport, energy-saving, environmental friendly.

 

The input voltage of 3528 SMD LED strips is 12VDC, must be equipped with 12VDC switching power supplies. After calculating the connection length and output power of each strip, engineers need to equip a power supply (20% higher than rated power). The best suggestion is: the length of each LED strip is 4 meters, a group of DC output lines from the switching power supply. 3528 SMD LED soft strips will generate heat automatically at work. So they cannot be installed in places with temperature. Normally should less than 50 centigrade.