Meanwell Driver Bridgelux Chip led high bay light Specification:
|
nput Voltage |
AC85V~265V |
|
Freqency Range |
50Hz~60Hz |
|
Total Harmonic Distortion |
less than 9% |
|
Power-factor |
> 0.9 |
|
Power Efficiency |
> 86% |
|
LED Power |
200W |
|
System Consumption |
218W |
|
LED Working Voltage |
30-36V DC |
|
LED Quantity |
1pcs |
|
LED Consumption |
80-100LM/W |
|
LED Initial Flux |
WW (2700K-3300K)/16600LM NW (4000-5000K)/16900LM CW (5300-7000K)/16700LM |
|
Luminaire Efficiency |
>85% |
|
Center Illuminance |
Height: 4M 1511.5LUX Height: 6M 678.3LUX Height: 8M 416.7LUX |
|
Beam Angle |
80° |
|
Illuminance Area (Light Spot)(Round) |
Height: 4M / Ø7.05m Height: 6M / Ø10.37m Height: 8M / Ø13.69m |
|
Illuminance Uniformity |
>0.6 |
|
Color Rendering Index |
WW/Ra>68 NW/Ra>75 CW/Ra>75 |
|
Light Distribution |
Symmetry / Light spot (round) |
|
Light Design |
LED+reflector secondly light distribution |
|
Juction Temperature |
less than 80°c |
|
Operation Temperature |
-40°c to +55°c |
|
Storage Temperature |
-25°c to +65°c (26°c is best-fit) |
|
IP Rating |
IP65 |
|
Working Life Span |
50,000Hours |
Features:
1, The light source adopts the integration of imported single high power LED, with the special design of integrating many chips into one lighting source.
2, Integrative design for heat sink and housing ensure 50,000 hours life-span for the LED. If it works 11-12 hours per day, it can work over 10 years.
3, The high purity aluminum from Germany as the reflector is at high reflecting efficiency, which improves the efficiency of light uniformity and utilization, and shows the LED advantage of energy saving.
4, Wide range of input voltage: AC85-265V. New high efficiency constant current driver.
5, Can present the original color of the objects, it has varies of colors to choose which can meet the requirements in different environments. It eliminates the dullness of environments caused by the lower color temperature, like sodium lamp, or higher color temperature, like mercury lamp.
6, No delay start. It can reach normal lighting as soon as it is turned on. No noise.
7, Use powerful LED light source and high efficiency imported LED driver. Compare with sodium lights, it can save electricity around 60%.
8, Environment friendly and no air pollution. We exert the design of using cold light source. It no heat radiation. There is no ill to our eyes and skin. The floodlights do not have lead, hydrargyrum and any other contamination. It is really environment friendly with ROHS certificate
9,Beam Angle: both 120 and 80are available
Installation of led high bay light:
1. The lamp body power leads through the silicone ring hook, then hook screwed into the lamp body
2. Mounting lamp shade
3. The accessory hook fixed on the roof, hanging on a hook on one end of the chain, the other end will be led mining lamp lifted;
4 Connect the power cord led mining lamp, when red is positive, blue is negative, yellow unacceptable.