月份：2014年1月

China led light manufacturer 10W CREE MR11 led spot lighting

China led light manufacturer 10W CREE MR11 led spot lighting

China led light manufacturer 10W CREE MR11 led spot lighting

China led light manufacturer 10W CREE MR11 led spot lighting Specification:

Luminous Flux 750LM-1000LM
CRI  80Ra
 

Circuit Protection

 

 Over-Current Protection, Short-Circuit Protection
Over-Voltage Protection
High Voltage Surges Protection
Color Temperature warm white 2700-3500K; Pure white 5500-6500K
Dimension 50mm*55mm
Beam Angle 60º/ 30º
Working voltage AC/DC12V; AC100-240V
Material Aluminum + PC
Base MR16/GU10
Operating Temperature -20°~ 45°
Warranty 3years

Application:

1. Recessed lighting, shelf lighting, ceiling/wall coves

2. Cabinet and under counter lighting, office work station

3. Back lighting, step lighting, light boxes

4. Merchandising, exhibition stands, and panels

China led light manufacturer 10W CREE MR11 led spot lighting

China led light manufacturer 10W CREE MR11 led spot lighting

Color Changing Submersible LED Lights Christmas Lights

Color Changing Submersible LED Lights Christmas Lights

Color Changing Submersible LED Lights Christmas Lights

These Color Changing Submersible Led Lights are waterproof, reusable, and wireless. They are sure to leave a lasting impression on your guests! You will instantly enhance any table centrepiece, place setting, art piece, costume, mask, or other decor item with these lightss

1.Colors:White, Red, Amber, Blue, Teal, color changing & Purple.

2.Batteries: Two replaceable CR2032 batteries power the lights for more than 72 hours. CR 2032 replacement batteries are available on our website.

3.LED bulb: single LED bulb.The light source is a safe, efficient and robust LED.

4.Measurements: 3cm in diameter and 2cm in height.

5.Instructions:Follow the arrows indicated at the bottom of the device, twisting the base to turn the submersible tea lights on or off. When batteries run flat, replace the 2 x CR2032 batteries with fresh ones. (With the positive polarity of the batteries facing the bottom of the device.)

IP65 18w COB led light manufacturer

IP65 18w COB led light manufacturer

IP65 18w COB led light manufacturer

IP65 18w COB led light manufacturer Specification:

Dimension Dia120x133mm
CCT WW, PW, CW(2700-6500K)
Light source Sharp COB/Epistar COB
CRI >80
Whole Lamp Lumen 1100 lm± 5%
Power Consumption 18 W
Beam Angle 38 degree or 120 degree
Base  E27/E26
Power Factor >0.95
Voltage 85-264V AC / 50-60hz
Dimmable range 10%-100%
Lifespan 50,000 hours (70% retention rate of lumen Ta = 25 ° c)
 Feature Dimmable, Waterproof
Material shell aluminum , The optical system: PC diffusion hood
Cover Transparent/Frosted cover for Choice

IP65 18w COB led light manufacturer Features:

1) SAA, UL, PSE approved, LVD,EMC test report suitable for Japan, Europe,

America, Australia and other market
2) Adopt Sharp COB leds, Ruby Brand Capacitor
3) High lumens output with 75lm/w, energy saving over 70% compared with

Halogen PAR38
4) Strictly Unique in the market, Independently R&D from VOLUN
5) As the supplier of two of the top 500 enterprise in the world, we have strict

producing process and quality inspection process;
6) Reliable warranty : 3years pro-rated warranty
7) Comercial indoor use or outdoor use with IP65 test report
8)Dimmable with 110-120VAC conventional rotary or slidedimmer

with smooth , dimming operation. Dimming range 10%-100%

 

Application: 
1. Landscape Accent / Spot lighting
2. Architectural Lighting
3. Display Case Accent
4. Artwork Lighting
5. Mood Lighting / General lighting
6. Amusement Park Accent
7. Decorative lighting & Outdoor advertisement

High Cost Performance LED Panel Light

LED panel light seems to have a booming market, but the foam should not be ignored. Many small workshops, small businesses have no development and no marketing, putting aside the quality and concentrating specifically on price, which leads to the confusion in the market and brings enormous risks to personal and property safety of consumers.

High Cost Performance LED Panel Light

LED panel light is not our flagship product, roughly 20% of total sales of LED products, but sales of LED panel light have been in a rising state.

The biggest advantage of ceiling LED panel lights is the high cost performance because the products are driven by constant current regulator, the power is isolated and the backplane is thick and not easy to be distorted. The high cooling effect aluminum plate and imported silicone ensure the cooling effect of the whole lamp; the lampshade is stretched after the second mask and light transmission is over 90%; the ceiling panel light uses high quality chip light source, the light fade is small and the lifespan could be up to 50,000 hours.

Trend over next five or ten years is to uphold the quality and ensure the suitability of LED panel lights, making them closer to consumers. The latest LED RGB panel light has taken a solid first step in the market and achieved good results.

hot selling high power 9w white led ceiling light

hot selling high power 9w white led ceiling light

hot selling high power 9w white led ceiling light

hot selling high power 9w white led ceiling light Specification:

Wattage 9*1W LED light source Cree, Edison, Epistar etc
Voltage AC100V-240V  50-60Hz LED luminous efficiency 100-110LM/PCS
LEDs quantity 9 PCS LED color index (CRI) Ra>72
Dimension φ120mm H80mm Power factor (PF) 0.9
Opening φ105mm Environment temp -30°C-50°C
Color R/G/B/Y/W/WW Environment humidity <95%
Color temp 2700K-7500K Life span ≥50,000 hours
Material AL+LENS Warranty 2 years

hot selling high power 9w white led ceiling light

1.   Long life span LED that more than 50,000 hours.

2.   70-90% energy saving than traditional lamps.

3.   Good quality aluminum lamp body with perfect cooling character.

4.   Low consumption and efficient LED with high CRI and luminous flux.

5.   WW 2700K3500K, NW 4000K-4200K, W 6000K-6500K, CW 7000K-9500K.

6.   Built-in LED driver with IC that could work efficiently under AC100 to AC240V.

7.   PMMA LED lens 15 degree, 25 degree, 30 degree, 45 degree, 60 degree and 120 degree.

ceiling led light Application 

1.   Store, plaza, mall, supermarket and warehouse lighting.

2.   Counter, display window, show room and museum lighting.

3.   School, hospital, office, meeting room, residential area lighting.

4.   Bar restaurant, hotel bedroom, dining room, hall and lobby lighting.

5.   Other indoor door occasions need LED.

Our service for ceiling led light

1.  Your inquiry related to our products or prices will be replied within 24 hours;

2.  Well-trained and experienced staffs to answer all your enquires in fluent English;

3.  OEM & ODM welcomed, our professional R&D dept. will realize your customized lighting.

4.  Distributorship is offered for your unique design and some of our current models.

5.  Protection of your sales area  ideas of design and all your private information.

COB 6 inch 15W commercial dimmable led down light

COB 6 inch 15W commercial dimmable led down light

COB 6 inch 15W commercial dimmable led down light

COB 6 inch 15W commercial dimmable led down light Specification:

Supply Voltage  110/220v
Supply Frequency   50-60Hz
Supply Current   0.12A
Power Factor   0.9
Lamp Power  1*15W
Lamp Heatsink   Aluminium Alloy
Attachment Clip   Steel
Lens Retaining Clip   Steel, chrome plated
Len/Diffuser   Polycarbonate
Terminal Clamp Moulding   Thermoplastic
Ambient Temperature Rating   -20°C to 50°C
Maximum Surface Temp   <55°C
Luminous Flux  1150 lumens
CRI  80
Colour Temperature  2700k
Beam Angle  120

COB 6 inch 15W commercial dimmable led down light Features: 

  • High grade aluminium-alloy construction with powder coated finish
  • Advanced UV stabilised acrylic diffuser
  • Excellent thermal control for long life-span
  • High output SMD LED chips with excellent colour consistency and high CRI
  • Up to 80 lm/W efficiency
  • Average lifespan over 30,000 hours
  • Does not emit harmful infrared or UV rays
  • External control gear included. Power factor up to 0.95
  • Design as a fluorescent downlight replacement
  • 7W, 11W, 13W, 15W and 26W versions

Attention: 

Do not substitute for emergency light.

Recommended to used in -20°C~+40°C, it will be bad for the product lifespan if beyond the range.

Should be installed and maintained by professionals.

Applications: 

Use for Exhibition,Cabinet,Jewelry,Fashion house,Residential house,Shopping mall and Commercial building.

Benefits:

  • Cuts energy consum ption significantly
  • Reduces maintenance costs
  • Lights more evenly
  • Improved illumination of products
  • Reduced heat
  • No UV light
  • Environment-friendly and no mercury

COB 6 inch 15W commercial dimmable led down light

1200mmx300mm 35W 10mm led panel light

1200mmx300mm 35W 10mm led panel light

1200mmx300mm 35W 10mm led panel light

1200mmx300mm 35W 10mm led panel light 

Dimension 1194X294X10mm
Lighting Area 1151.9X252.9mm
Iput voltage AC85~130V or AC170-265V   50/60HZ
Power 35W
Light source Ultra-high brightness SMD LED & Customized as customer request
Constant Current 2000mA
Luminous flux 2000 ~ 2200LM
Centre Lux(1M) >1300 LUX
CCT. 2700 ~ 6500K
Fixture material Aluminum alloy 6063,  Face oxidation treated, Imported acrylics panel material
PF 0.9
CRI >70
IP degree IP40
Controller PMW
Temperature -20 ~60°C
LED lifespan 50,000H

1200mmx300mm 35W 10mm led panel light Feature:

1. 80% Energy saving powered by SMD led.
2. Glare-free lighting and even brightness by Edge-lighting , using high quality light- guide plate.
3. High power efficiency which is above 100 Lm/w.
4. Special circuit layout and good heat dissipation ensure light’s long lifespan.
5. Ultra-Thin, thickness is 15.8mm.
6. No cost of maintenance and easy installation.
7. Environmentally friendly.
8. Controllable.
9. Mitsubishi brand diffusion plate and the light guide palte
10.Samsung chip
11 .leak-proof light structure
Remarks: 1.1 Making four stainless steel round davits in the ceiling, which will be the area of 1116*216MM

1.2 Getting stainless steel string go through the connecting ring, then fasten the ring with round davits

1.3 Tighten stuck string davits with panel light screwy.

1.4    Insert stainless string into stuck string davits, fasten them

The IP grade is IP40, it is free-waterproof.

In order to lengthen the lifespan, do not use alcohol or other volatile solvent clean the lamp.

Use soft cotton cloth with soapy water after wringing cleanses the lamp body.

Only professionals can decollate and fix up the light.

The lamp driver is specially adopted. Do not replace the driver without permission

High Lumen 120W IP67 Solar LED street lights

High Lumen 120W IP67 Solar LED street lights

High Lumen 120W IP67 Solar LED street lights

High Lumen 120W IP67 Solar LED street lights Specification:

Power Rating 120W
Input voltage AC90-260V DC12-24V
Frequency 50/60HZ
Beam Angle 150 degree
Color Temperature 3000-6500K
Led chip Brand Cree Epistar BridgeluxOsram
Material Aluminum
IP rating IP65
PFC >0.95
Warranty 3 years
Certification CE RoHS TUV

High Lumen 120W IP67 Solar LED street lights Feature:

  • 1. Energy saving, environmental;
  • 2. low price and good quality;
  • 3 Fashion design and different types;
  • 4. Easy to install and use;
  • No risk of mercury emission, environmental protection;

High Lumen 120W IP67 Solar LED street lights Technical Features:

  • 1. US Bridgelux 45MIL led chips and high quality power supply are used, realizing long-term reliable and stable working without failure and maintenance.
  • 2. Adopt to the lens of point,cambered surface with the newest independent research and development.It’s ultrathin,no glare,high reflectivity.
  • 3. Lamp shell surface spraying radiation protective paint,which makes the lights antioxidant and salt-resistant.
  • 4. Material is carbon aluminum alloy,which makes the lights high heat dissipation.
  • 5.Inside the lights adopt to the composite high thermal module with light source, which increase lights heat conduction and dissipation .
  • 6.Adopt to the constant current high power transform supply, PEC could reach more than 90%.

141W 5,000K Industrial LED High Bay Lights

141W 5,000K Industrial LED High Bay Lights

141W 5,000K Industrial LED High Bay Lights

141W 5,000K Industrial LED High Bay Lights Specification:

Lumens (Typical)† 13,940 †Tolerance +/- 10%.
Wattages 141W (at 120 VAC); 138W (at 277 VAC)
Lumens Per Watt (LPW) 99
Color Temperature 5,000K
Voltage Range, VAC 100-277V, 347-480V; 50/60 Hz
Operating Temperature -30°C to +40°C
Lifetime 60,000 hours at +40°C
CRI >70

141W 5,000K Industrial LED High Bay Lights Features:

  • Up to 69% energy savings over 400W metal halide fixtures
  • 60,000 hours (rated life) of maintenance-free operation for labor and material savings over the life of the fixture
  • Two to three year payback by retrofitting four or six lamp T5HO or 400W metal halide high bay fixtures
  • Operating temperature of -30°C to +40°C ambient
  • Uniform wide distribution for optimum lighting levels for 18-25 foot mounting heights
  • Occupancy sensing control available for enhanced energy savings and lifetime of LED fixture
  • Hook and cord attachment for 3/4″ pendant hub
  • 347-480 VAC driver option

Industrial High Bay LED Luminaires are ideal for:

  • Locations requiring continuous and consistent light levels
  • Areas requiring frequent on-and-off of lights
  • Areas that are difficult to relamp or that cause production to be stopped during the lamp maintenance process
  • Ordinary clean, light industrial production facilities, packaging facilities, and warehouses
  • Indoor and dry locations only

 

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires

High-performance LEDs and a solid-state electronic driver provide light where you need it, at a fraction of the operating costs of HID lighting technologies.

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires Specification:

Hub Sizes 3/4″ NPT; 1″ NPT; 1 1/2″ NPT; 25mm; 32mm
Wattages 80W; 100W; 130W; 151W; 175W
Voltages 120-277VAC 50/60 Hz; 108-250VDC
Body and Mounting Modules Material Copper-free aluminum with Corro-free™ epoxy powder coat
Lens Material Shatter-resistant, explosion proof glass
Gasket Material Silicone
Guard Material Stainless steel

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires Features:

  • Quick-connect design – install and wire the mounting module, then simply screw in the luminaire
  • Factory-sealed – no external sealing fittings required in Groups B, C, and D
  • Adapter available for connection to existing Hazard•Gard® EVI, EVLP, and EVM modules
  • Energy-efficient – up to 62% reduction in energy used versus equivalent HID fixtures
  • 60,000 hours rated life – eliminates need for frequent lamp replacement
  • Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
  • T5 temperature rating
  • Operating ambient -25ºC to 65ºC

NEC and CEC:

  • Class I, Division 1, Groups B, C, D
  • Class I, Zone 1, Groups IIB + H2, IIB, IIA
  • Class II, Groups E, F, G
  • Class III, Simultaneous Presence

UL Standards:

  • UL844 Electric Fixture Hangers for Hazardous Locations
  • UL1598 Luminaire
  • UL1598A Luminaire for Installation on Marine Vessels

CSA Standard:

  • C22.2 No. 137

Environmental Ratings:

  • NEMA 4X
  • IP66
  • Marine and Wet Locations

IEC and ATEX Certifications and Protection (Pending):

  • Ex II 2G Ex d IIC (Zone 1, 2) (Pending)
  • Ex II 2D Ex tD A21 IP66 (Zone 21, 22) (Pending)