月份：2014年3月

LED lighting is suitable for metro area application

In 2011, the relevant state departments issued a “subway places LED lighting technical specifications”, which stated the subway LED lighting procurement specification and opened a standardized way for the subway LED lighting. Taking into account the diversity needs of metro lighting, LED lighting is undoubtedly the best choice for the subway, which has unparalleled advantages of energy-saving, stable and durable compared with traditional lamps. Moreover, the strong seismic characteristic of LED is very suitable for metro operating environment.

LED lighting is suitable for metro area application

It is understood that the Shenzhen Metro Line 2 total length of 33 km, all underground lines , a total of 29 sites , of which nine transfer stations , LED lamps purchase quantity of about 25,500 units. Currently, the number of metro about 48 , while 28 cities are building subway. The existing domestic subway network to the Shenzhen Metro , for example, in addition to the 2nd line to use the full range of LED lighting , the rest of the multi- use of traditional lighting , LED lighting market potential can be described as the subway is pretty huge . In addition, the former Guangzhou Metro Line sanyuanli , train stations, Yuexiu Park , Memorial Park, Haizhu Square , City Palace , Jiangnanxi , Zhongshan University , Lujiang , off the village , Modiesha , Newport East , Pazhou lighting systems and other public areas of the field of 14 stations will be replaced at the beginning of this year, energy-saving LED lamps , lighting transform the number of about 1.8 million units .

Started from 2005, the Beijing subway began to invest 8.5 billion yuan for the two metro lines with more than 70 transformation equipment systems. Data shows that the year before the implementation Beijing Subway had had pilot projects of LED lighting, a total replacement of nearly 2000 LED lamps, saving 156,000 degrees electricity annually. This year, the Beijing Subway Operation Company will expand the promotion of green LED lighting. LED lighting is expected to be used to replace the 20,000 traditional lamps, annually saving 1.7 million degrees electricity.

Mini Globe 6.5W (40W) 2700K 470lm E27 Dimmable-Lamp LED bulb light

Mini Globe 6.5W (40W) 2700K 470lm E27 Dimmable-Lamp LED bulb light

Mini Globe 6.5W (40W) 2700K 470lm E27 Dimmable-Lamp LED bulb light

This 6.5W retro-fit Integral LED Mini Globe (large screw base) delivers a warm white light and brightness, similar to a 40W filament bulb. It features high output, multi Everlight LEDs and an anti-glare refractor. Ideal for living rooms, dining rooms and bedrooms, in classic or modern wall or floor/table lamp fittings.

Mini Globe 6.5W (40W) 2700K 470lm E27 Dimmable-Lamp LED bulb light Specification:

Lumens:470lm
Lumens per Watt:72.3lm/W
Correlated Colour Temperature (CCT):2700k
Beam Angle:140º
Colour Temperature:Warm White
Colour Rendering Index (CRI):>=80
LED Manufacturer:Everlight
LED Type:Surface mounted device (SMD)
Instant on – Less than 1 second:Yes
Lifetime:

25,000 hrs
Switching Cycles:>12,500 X
Voltage Range:220-240V
Power Consumption:6.5 Watts
Current:AC
Ampage:58mA
Frequency Range:50 Hz
Wattage Equivalent:40 Watts
Power Factor:>=0.50
Dimming:Dimmable with compatible dimmers
Compatible Dimmer(s):Varilight JQP401W
LVD Certified:Yes
If you want to know more about this product,please contact us now!

GU10 COB PAR16 6W (50W) 3000K 470lm LED panel lights

GU10 COB PAR16 6W (50W) 3000K 470lm LED panel lights

GU10 COB PAR16 6W (50W) 3000K 470lm LED panel lights

This premium 6W retro-fit Integral LED GU10 delivers a warm white light and brightness, similar to a 50W halogen bulb. Using the latest Chip-On-Board (COB) technology and a specially designed refractor, the lamp provides a halogen look when illuminated and switched off. Finished in a die-cast aluminium and plastic thermally efficient body. The ideal lamp for commercial and home use.

GU10 COB PAR16 6W (50W) 3000K 470lm LED panel lights Specification:

Lumens:470lm
Lumens per Watt:78.0lm/W
Peak Intensity:1 110Cd
Correlated Colour Temperature (CCT):3000k
Beam Angle:36º
Colour Temperature:Warm White
Colour Rendering Index (CRI):>=80
LED Manufacturer:Everlight
LED Type:Chip-on-board (COB)
Instant on – Less than 1 second:Yes
Lifetime:25,000 hrs
Switching Cycles:

>12,500 X
Voltage Range:220-240V
Power Consumption:

6.0 Watts
Current:AC
Ampage:53mA
Frequency Range:50 Hz
Wattage Equivalent:50 Watts
Power Factor:>=0.50
Dimming:Non-dimmable
LVD Certified:Yes

If you want to know more about this product,please contact us now!

600×600 36W 4000k 2800lm LED panel lights

600×600 36W 4000k 2800lm LED panel lights

600x600 36W 4000k 2800lm LED panel lights

This 36W and 2800lm Integral LED panel delivers a cool white light with a superior brightness, efficacy (78lm/w) and beam angle to the 72w fluorescent fitting it is designed to replace. Its ultra-thin aluminium and polycarbonate design means installation is simple and maintenance is minimal. This panel offers many cost savings no matter what your application is: offices, meeting rooms, corridors, airports, schools/universities and retail environments.

600×600 36W 4000k 2800lm LED panel lights Specification:

Power Consumption:36.0 Watts
Current:AC
Ampage:1 000mA
Frequency Range:50/60 Hz
Power Factor:>=0.90
Dimming:Non-dimmable
LVD Certified:Yes
Lumens:

2 800lm
Lumens per Watt:

78.0lm/W
Lighting Method:

Edge-lit
Correlated Colour Temperature (CCT):

4000k
Beam Angle:

120º
Colour Temperature:
Colour Rendering Index (CRI):>=80
LED Manufacturer:Epistar
LED Type:Edge-lit
LED Size:56:30
Instant on – Less than 1 second:Yes
Lifetime:35,000 hrs
Switching Cycles:>20,000 X
Lowest Operating Temperature:-20˚c
Maximum Operating Temperature:40˚c
IP (Ingress Protection) Rating:IP40
IP Rating (Back/Recessed side):IP40
Hg 0% (Mercury Free):Yes
If you want to know more about this product,please contact us now!

3W (15W) 4000K 230lm 54mm Adjustable LED Downlight

3W (15W) 4000K 230lm 54mm Adjustable LED Downlight

3W (15W) 4000K 230lm 54mm Adjustable LED Downlight

The Integral LED 3W Watt adjustable Downlight from the Amargosa range delivers a cool white beam that has an equivalent distribution to many traditional to halogen lamps. Integral has developed this downlight utilising a Sharp LED COB and incorporated an anti-glare refractor to enhance the optics provide a consistent beam angle. This is in conjunction with a die cast aluminium heat sink, designed for optimal heat dissipation and consistent performance. Integral offers a downlight with an excellent light output, huge energy savings compared to halogen/incandescent alternatives and a long lifetime. Integral LED Downlights have been designed for recessed installation in a wide range of commercial and home applications, as well as offering a retro-fit alternative where existing MR11 halogen lamps are fitted.

3W (15W) 4000K 230lm 54mm Adjustable LED Downlight Specification:

Voltage Range:220-240V
Power Consumption:3.0 Watts
Current:AC
Ampage:350mA
Frequency Range:50/60 Hz
Wattage Equivalent:15 Watts
Power Factor:>=0.50
Dimming:Non-dimmable
LVD Certified:Yes
Lowest Operating Temperature:-20˚c
Maximum Operating Temperature:45˚c
IP (Ingress Protection) Rating:IP20
Hg 0% (Mercury Free):Yes

The difference between high-power and low-power

With the continuous development of LED technology, people has developed single LED ship with higher and higher power to adapt to the development of large-area lighting. Currently, the world’s most cutting-edge single LED can already do more than 200W. Although power can be made in high, its cost performance is not so good. Below we will analyze several common LED.

The difference between high-power and low-power

Currently the industry is heavily used single 0.06W power , its maximum brightness can be done 7LM, we do 6LM Zanan general terms, if you want the power of 1W, we need to use the same 17 LED, the total brightness of 17 * 6 = 102LM, ie can be 100LM / W, if we use a single -chip power of 1W , the output of the highest achieved brightness 80LM, used is generally about 60LM, which is on a luminance the main difference , we can see that for home use is concerned, we still have to choose a low-power LED is more appropriate.

From the perspective of product cost , high-power LED cost more than the cost of a low-power , which comes from two aspects, one is the cost of the LED itself , the second is to add high-power LED aluminum heat sink, small power as long as the ordinary circuit board , can be achieved with natural cooling requirements .

Future maintenance costs from a product point of view , if we fail in the use of lighting , you can find any electrical repair shop to replace the damaged LED, an LED 0.06W of cost up to a dollar, plus maintenance fees will not exceed $ 5, if it is to replace one of 1W LED, LED will cost $ 8, plus the cost of necessary repairs around $ 15. And relatively speaking, a small power LED market can easily purchase an electronic market that ‘s not necessarily where power can buy .

High-power LED is not only a market trend but also the mainstream of future development. Since the current techniques still could not achieve our desired results, from a technical point of view, it is not suitable for home lighting.

LED High bay lights effectively improve the safety factor

According to relevant statistics , more than 30% of explosion accidents are caused mainly due to the use of incandescent light bulbs mining defects caused . The LED High bay lights could solve safety problems, promote the use of the large number of coal mines. LED mining lamp energy saving , safety , ease of use and other aspects of mining and the use of incandescent lamps has greatly improved compared to , but there is still a need to address the following questions .

LED High bay lights effectively improve the safety factor

The mine humidity, water, air, cloudy, dusty , LED High bay lights uses a nickel-metal hydride batteries or lithium batteries as a power source , LED light-emitting diodes as the light source , but these components of a water, into the dust after easily damaged, or even scrapped . Moisture will rust after latching screws hard relieved, bolts shall destroy , waste materials and man-hours. Charging port to plug into the gray often , especially in the cement solidification into the interface is difficult to remove after charging , LED High bay lights Charging influence , serious could be scrapped.

The design of the electrical energy into the receiving end LED High bay lights, transparent pouches securely seal the LED mining lamp , using non-contact power supply technology , we can solve these problems. Increase the service life , explosion-proof performance , antistatic performance LED mining lamp , reducing the scrap rate LED mining lamp , reducing the amount of maintenance , increase the practicality and safety and reliability factor.

50 Watt-Equivalent 9 Watt 120 VAC Flood Cool White LED Downlight

50 Watt-Equivalent 9 Watt 120 VAC Flood Cool White LED Downlight

50 Watt-Equivalent 9 Watt 120 VAC Flood Cool White LED Downlight

50 Watt-Equivalent 9 Watt 120 VAC Flood Cool White LED Downlight Specification:

Light Color Cool White
Color Temperature 5,000°K
Color Rendering Index 80
Bulb Shape 4 inch can
Base E26/27 (Medium)
Beam Angle 90°
Brightness 500 lumens
Efficacy 56.2 lumens/watt
Power (Watts) 8.9
Incandescent Equivalent 50 Watts
Input Voltage 120 to 277 AC
Diameter (English) 5 in
Diameter (Metric) 127 mm
Max. Overall Length (English) 3.5 in
Max. Overall Length (Metric) 88.9 mm
Average Lifetime 50,000 hours
Rating ETL, RoHS, Energy Star
Year Savings $12.00/year
Lifetime Savings $411
Carbon Reduction 2815 pounds

This is an LED downlight module for new construction and retrofit that installs easily in most standard 4 inch recessed housings. (See data sheet at Documentation tab for more information.)

  • Cool White, 5000° Kelvin.
  • Great light quality: CRI = 80+.
  • Consumes only 9 watts and delivers as much light as an 50 watt halogen or a 15 watt CFL.
  • Will dim to less than 5% in our tests, if you use the right dimmer. See details at dimmer compatiblity.
  • Very energy efficient: 500 lumens delivered using only 9 watts (56 lumens/watt).
  • In our tests, we see watts consumed drops linearly with dimming level from 9 watts at 100% to 2 watts at about 25%.
  • Accepts 120 to 277 VAC.
  • Only 3.5 inches deep, so it fits in tight places.
  • More light per watt than compact fluorescents, making it easier to comply with tightening energy codes.
  • 50,000 hour lifetime (8 years at 18 hours per day).
  • No mercury, unlike compact fluorescents.
  • Suitable replacement for a typical 50 watt halogen flood, in light output, color and beam spread.
  • Easy to hardwire, or use the included medium (standard) base size screw-in attachment.
  • Suitable for use in IC rated cans for contact with insulation or non-IC cans as well.
  • Suitable for damp locations.
  • 5 year manufacturer warranty.
  • Meets CA Title 24 requirements when used with a GU24 connector, such as the one we show in companion parts.
  • Made by MaxLite, an industry leader.
  • ETL listed.
  • ENERGY STAR qualified.
  • RoHS compliant.

Perfect for downlighting in offices and homes using energy efficient LED technology. It’s a great replacement for R30, PAR30, R38, PAR38 and R40 bulbs, halogen or compact fluorescent. This is an excellent product for general illumination.

If you want to know more about this product,please contact us now!

2×4 Eco-T LED Recessed Troffer, 55 Watts

2×4 Eco-T LED Recessed Troffer, 55 Watts

2x4 Eco-T LED Recessed Troffer, 55 Watts

2×4 Eco-T LED Recessed Troffer, 55 Watts Specification:

Color Rendering Index 85
Lens prismatic diffuser
Finish White
Power (Watts) 55
Input Voltage 120 to 277 AC
Length (English) 47.75 in
Length (Metric) 1213 mm
Width (English) 23.75 in
Width (Metric) 603 mm
Height (English) 3.3 in
Height (Metric) 84 mm
Average Lifetime 50,000 hours
Rating ETL, CETL, RoHS, DLC, FCC

The steel housing serves as an LED heat sink and provides maximum thermal control, while also remaining only 3.3 inches deep including the junction box. The slim profile makes this LED recessed troffer ideal for low depth ceiling cavities. Comes standard with a prismatic lens for high lumen output. Translucent white diffuser sold separately.

  • Also available in 2’x2′.
  • 55 watts consumed.
  • Color Rendering Index: 85.
  • 0-10V dimming standard.
  • Integrated Class 2 ETL listed LED driver.
  • Link and control up to 20 panels per master panel.
  • Option to control dimming via building control systems, wall dimmers, or IR remote (sold separately).
  • Input voltage: 120 to 277 AC.
  • High power factor for high efficiency. PF >0.98.
  • Operating temperature range: -20 °F to 130 °F.
  • Indoor use.
  • 50,000 hour lifetime, at L70 standards.
  • Warranty: 5 years.
  • 14.5 pounds.
  • Certifications: ETL, cETL, FCC.
  • RoHS: constructed without hazardous materials.
  • LM79 and IES data is available for each option. Select a color temperature and then refer to the documents section.
  • DesignLights Consortium (DLC)-approved. Rebates may be available in your area.

If you want to know more about this product,please contact us NOW!

E17 LED Exit Sign Replacement Bulb Kit

E17 LED Exit Sign Replacement Bulb Kit

E17 LED Exit Sign Replacement Bulb Kit

E17 LED Exit Sign Replacement Bulb Kit Specification:

Light Color White
Bulb Shape T6 1/2
Base Cand., E17 (Intrmdt), DC Bay
Brightness 90 lumens/bulb
Power (Watts) 1
Input Voltage 120 AC
Number of LEDs 20
Diameter (English) 0.94 in
Diameter (Metric) 23.9 mm
Max. Overall Length (English) 6 in
Max. Overall Length (Metric) 152 mm
Average Lifetime 100,000 hours
Warranty 2 years

Each bulb is 6 inches long. If you use the adapters for medium or bayonet bases, the assembly is 6.5 inches long. Please ensure it will fit your exit sign. Some exit signs have smaller enclosures that may not have enough room inside.

Kit includes:

  • 2 candelabra-based LED exit bulbs;
  • 2 candelabra to D.C. bayonet adapters; and
  • 2 candelabra to intermediate base adapters.

If you want to know more about this products,please contact us now!