作者：Blade

1.2W G4 12V LED Capsule Globe

1.2W G4 12V LED Capsule Globe

The Brightgreen BR80 1.2W LED G4 Capsule lamp is a direct replacement for 10W halogen G4 bi-pin bulbs. 

Comprising of very high efficiency LEDs the BR80 delivers a soft warm glow in a wide 200 degree beam with luminous efficacy of 67lm/W.

With an estimated life span of 30,000 hours it completely removes the painful task of replacing lamps constantly.

1.2W G4 12V LED Capsule Globe Specification:

Input Voltage – 12V
Power Consumption – 1.2W
Connection – G4 Bi-Pin
Dimmable – No
Lumen Output – 80lm
Efficacy – 67lm/W
Light Quality – 83 CRI
Beam Angle – 200 Degrees
Lifespan – 30,000 Hours

Buy LED strip lights with Caution

There are a lot of LED lights with customer demand is not conventional specifications, is the need to custom. But because not familiar with some of the technical parameters of LED lights, so there is a lot of demand is obviously not meet the technical requirements, even if made ??out of their use will also be affected. Here to talk about the three special note about LED lights with special custom order for the purchase of customer reference:

Buy LED strip lights with Caution

　　1, LED lights with circuit design:

LED lights with the circuit comprises a series circuit and parallel circuit, there is a series-parallel circuit.

a. advantage is that the series circuit of constant current, relatively easy to control the LED drive current. The disadvantage is that if one LED is damaged, then all the LED will not light, but it will not affect other LED life.

b. advantage of the parallel circuit is that any one LED does not affect a bad use of the other LED. The disadvantage is that if you do not add the current limiting resistor, then any one LED is damaged, it will cause the other across the LED current is increased, it will burn the other LED. And because a single LED driving voltage is low, the voltage will cause most to do useful work for is a waste of resources.

c. series-parallel circuit is a circuit LED lights with GM, because the use of several LED in series along with a group, and then other groups in parallel. You can maximize the utilization of the supply voltage, reducing wasted effort loss. Meanwhile, the use of several LED in series, can guarantee these LED drive current is the same, constant current LED beneficial to ensure that the service life of LED. After a series of LED lamps and other groups and then in parallel, you can guarantee if a group of damaged, will not affect the normal use of other groups. Also, because each has a current limiting resistor, therefore, not because of damage to a group which affect the life of the other groups.

　　2, LED lights with LED quantity per meter:

Typically, LED lights with LED quantity per meter is fixed. For example, 1210 is the 60 lights, 5050 was 30 lamps, special lamps is 60. If there are other special requirements, such as 50 lights per meter, which involves you want to modify the circuit. Because usually three LED a group, if it is 50 light, it would become a group number is not enough, but if a group into two LED, it would increase the current limiting resistor, this will result in a waste of resources . So, do the special requirements of custom LED lights, be sure to pay attention to the number of lamp beads is a multiple of 3, so as not to cause voltage waste of resources.

　　3, LED lights with cut position:

Generally, a cut is made ??in each location. But some customers will require a single LED as a cutting position, so that is unreasonable. Because in that case would be tantamount to a parallel circuit, for the life of LED lights is nothing guaranteed.

1-Head LED Bronze Switch-Controlled Flood Light

1-Head LED Bronze Switch-Controlled Flood Light

1-Head LED Bronze Switch-Controlled Flood Light Specification:

Light Fixture Material Plastic
Manufacturer Color/Finish Bronze
Number of Light Heads 1.0
Bulb Included Yes
Bulb Type LED
Hardwired or Plug-In Hardwired
Solar Powered No
Height (Inches) 10.0
Width (Inches) 7.5
Depth (Inches) 4.5
Voltage (Volts) 120.0
Color/Finish Family Bronze
UL Safety Listing No
CSA Safety Listing No
ETL Safety Listing Yes
ENERGY STAR Qualified No
Lighting Technology Integrated LED
Light Bulb Base Type LED
Recommended Light Bulb Shape LED

Features:

  • Designed and built to be an energy efficient alternative to metal halide or high pressure sodium fixtures
  • Photocell sensor
  • 36 diode board
  • 18 watts

3-Head Dual Detection Zone White LED Flood Light

3-Head Dual Detection Zone White LED Flood Light

3-Head Dual Detection Zone White LED Flood Light Specification:

Solar Powered No
Color/Finish Family White
Number of Light Heads 3.0
Timer Included Yes
Number of Bulbs Required 14.0
Bulb Included Yes
Bulb Type LED
UL Safety Listing Yes
CSA Safety Listing Yes
ETL Safety Listing No
ENERGY STAR Qualified Yes
Two-Level Lighting No
Dual Detection Zone Yes
Soft Start No
Light Fixture Material Aluminum
Height (Inches) 22.58
Width (Inches) 33.0
Depth (Inches) 22.0
Lighting Technology Integrated LED
Light Bulb Base Type LED
Recommended Light Bulb Shape LED

Features:

  • 3-Light, 360-degree motion detector area flood light
  • No-tools adjustment for desired coverage
  • Total 2349 lumens output
  • 14 x 2.3W LED’s with power supply (Cree XP-G model)
  • Energy star rated

180-Degree Black LED Motion-Activated Flood Light

180-Degree Black LED Motion-Activated Flood Light

180-Degree Black LED Motion-Activated Flood Light Specification:

Solar Powered Yes
Color/Finish Family Black
Number of Light Heads 1.0
Timer Included Yes
Number of Bulbs Required 8.0
Bulb Included Yes
Bulb Type LED
ENERGY STAR Qualified No
Two-Level Lighting No
Dual Detection Zone No
Soft Start Yes
Light Fixture Material Plastic
Height (Inches) 24.0
Width (Inches) 18.0
Depth (Inches) 13.0
Lighting Technology Integrated LED
Light Bulb Base Type LED
Recommended Light Bulb Shape LED
Collection Name N/A

Features:

  • Motion power LED solar light single
  • LED: 5630 seoul semi conduct
  • Sensor: 180° and 50-ft distance
  • Adjustable time setting: 5 seconds, 90 seconds
  • 15-ft cable
  • Output: 359 Lumens
  • Color temperature: 5287K
  • Maximum fixture wattage: 3.2 watts

LED lamps how to distinguish good and bad quality

In the face of many brands, prices vary LED lights, many consumers did not know how to buy, do not know how to identify the quality of the pros and cons. In this regard, the industry summed up four points to buy LED lights need attention, help consumers easily identify.

LED lamps how to distinguish good and bad quality

　　See product packaging and labels

Shall be marked with the rated voltage, voltage range, rated power and other information, as well as brand names and related certification mark on genuine LED lamp packaging. Better printing quality genuine trademark LED lights on the packaging, legible, easy to fall off, that the use of a soft damp cloth to wipe the trademark is still legible. Label Printing and shoddy products of poor quality, fuzzy fonts, trademarks part of the product can be erased with a damp cloth. In addition, there are some inferior products on the packaging did not trademark printing and related certification mark.

See the appearance of lamps

Genuine LED lamp uses trichromatic lamp and lamp color than white, covered by hand, the color will look whiter. When you purchase, consumers can put on more than just comparing LED lights, lamp shape, size, consistency better product for the mass production of products in general together, most quality assurance. In addition, LED lights depends on the appearance of cracks, loose, and observe whether the interface has been prized, if it indicates that it is inferior products. Genuine LED lights in the installation and removal process does not appear loose, head tilt and so on.

Consumers also can identify the merits of its quality through LED lamp shell material. LED lights use genuine plastic case retardant materials, texture is rough, like frosted glass. Inferior product is used ordinary plastic, smooth and shiny, these materials are easy to deform, flammable characteristics.

　　Temperature look at work

In working condition, authentic LED lamp temperature is not too high, you can hand contact. If you purchased the product to heat up significantly at work, then its quality problems. In addition, LED lights flashing lights if there also there is a problem of its quality.

LED intelligent lighting growth 30%

Intelligent lighting refers to the use of computers distributed wireless telemetry, wireless data transmission, spread spectrum power line carrier communication technology, computer intelligent information processing and energy-saving technologies such as the composition of electrical control, remote control, remote communication control system, to achieve the lighting equipment the intelligent control.

LED intelligent lighting growth 30%

Adjust the brightness of the light intensity has, lighting soft-start, timing control, scene settings and other functions, and safe, energy-saving, comfortable and efficient. LED lighting products, a few years ago in order to save energy and long life as the main appeal, which in recent years has been the development of intelligent adaptive advantage valued by the industry, so intelligent LED light starts to get the favor of consumers, not just restaurants, commercial buildings, KTV , bars and other commercial establishments, some home users have begun to introduce intelligent dimming LED lights to achieve the color and mood lighting.

With the rising heat of intelligent lighting, Philips, Samsung and other international companies pioneered the LED intelligent lighting products. LED Guangya Exhibition on the intelligent display products become the focus of a number of enterprises, household light bulbs and commercial wireless intelligent control has become a hot topic. However, the market is now seeing more use of intelligent LED lights dimming, simple controls adjust color temperature, tone color, etc, from the truly intelligent lighting is still a considerable distance.

LED lighting is still in the alternative stage, and intelligent LED lighting market will open more room to grow and become a new growth point of the LED industry, alternative times and long-term growth momentum. Expected over the next two years, China’s LED intelligent lighting market growth of 30%.

Equipped with LED headlamps Audi cars

Back in 2008, the Audi R8 as the first sports car with full LED headlamps, refresh the industry standard. Now that the world’s most advanced vehicle headlights have been applied in a variety of Audi models. This lamp is not only lower energy consumption, and brighter, softer lighting.

Equipped with LED headlamps Audi cars

Now, LED lighting technology has the vast majority of products on the popularity of the Audi. It is interesting, LED lights have become a typical Audi design language. More and more people are with LED daytime running lights for the high recognition of the outline of the vehicle, “facial expression”, from very far away to identify at a glance Audi.

Audi A1: the focus of attention, the heart with it move. LED daytime running lights, Audi family’s iconic design language, from the classic Audi design gene. Curve angular headlights, full of British Gas, with xenon headlights, like Hawkeye generally sharp. Bright eyes a move, light up the crowd sight.

The new Audi A4L: front bi-xenon headlamps new design, using durable gas discharge technology, ensuring high beam, low beam lights are illuminated with high brightness and a wide range of lighting. New design with LED daytime running lights, in enhancing driving safety, while adding more whole front face elan.

Audi A6L: full-LED headlights and the entire body design seamless, bright light, Zoran into the head. Meanwhile, the full LED headlights to illuminate the effect of the nearest bright sunlight guidelines for your journey in the dark. Beam, high beam, daytime running lights, parking lights and showing the wide lights are using LED technology, projecting a day seem bright light, while also effectively reduce glare and fog weather.

2700K 4 in. Dimmable LED Retrofit Downlight

2700K 4 in. Dimmable LED Retrofit Downlight

Soft White (2700K) LED Down light produces 600 lumens while using 10 watts of power with an impressive CRI of 92. This retrofit kit fits 4 in. recessed cans and is Energy Star listed. With a 35,000 hour rated lifetime, this down light boasts long life, and energy savings.

2700K 4 in. Dimmable LED Retrofit Downlight Specification:

Actual Color Temperature (K) 2700 Assembled Depth (in.) 5.04 in
Assembled Height (in.) 3.38 in Assembled Width (in.) 5.04 in
Average Life (hours) 35000 Bulb Diameter (In.) 5.04
Bulb Type Downlight Color Rendering Index 82
ENERGY STAR Certified Yes Indoor/Outdoor Indoor/Outdoor
Light Bulb Base Code Medium Light Bulb Base Type Medium
Light Bulb Features Dimmable Light Bulb Shape Code BR30
Light Color Soft White Light Output (lumens) 600
Manufacturer Warranty 5 Year Warranty Number in Package 1
Returnable 90-Day Specialty Bulb Type Flood & Spot
Watt Equivalence 50 Wattage (watts) 10

Features:

  • Brightness: 600 lumens
  • Estimated yearly energy cost: $1.20 (based on 3 hours per day, 11/kWh. costs depend on rates and use)
  • Life: 32 years (based on 3 hours per day)
  • Light appearance: 2700K (soft white)
  • Energy used: 10-Watts (equivalent to a 50-Watt standard incandescent light bulb)
  • Lumens per Watt: 56
  • Contains mercury: no (for more on clean-up and safe disposal visit: epa.gov/cfl)
  • Uses 85% less energy compared to a standard incandescent light bulb
  • Lighting application: recessed ceiling light and suitable for damp locations
  • Integrated LED light source and trim, 4 in. recessed housings with a medium base
  • Dimmable: yes

Soft White 4 in. Dimmable LED Downlight

Soft White 4 in. Dimmable LED Downlight

10.5-Watt (65W) LED Downlight 575 lumens with 10.5 watts of power and can last for up to 35,000 hours. The LED bulb features Cree TrueWhite technology for efficiency and color accuracy and can be used to replace a standard 65-watt bulb. (E)* means this bulb meets Federal minimum efficiency standards.

Soft White 4 in. Dimmable LED Downlight Specification:

Actual Color Temperature (K) 2700 Assembled Depth (in.) 5 in
Assembled Height (in.) 5 in Assembled Width (in.) 5 in
Average Life (hours) 35000 Bulb Diameter (In.) 5
Bulb Type Downlight Color Rendering Index 90
Color Temperature Soft White Commercial / Residential Commercial / Residential
ENERGY STAR Certified Yes Indoor/Outdoor Indoor/Outdoor
Light Bulb Base Code Medium Light Bulb Base Type Medium
Light Bulb Features Dimmable Light Bulb Shape Code BR20
Light Color Soft White Light Output (lumens) 575
Manufacturer Warranty 3 years Number in Package 4
Returnable 90-Day Shatter Resistant No
Specialty Bulb Type Flood & Spot Watt Equivalence 65

Features:

  • Brightness: 575 Lumens
  • Estimated Yearly Energy Cost: $1.14 (Based on 3 hrs/day, $0.11/kWh. Costs depend on rates and use.)
  • Life: 32.0 years (Based on 3 hrs/day)
  • Light Appearance: 2700K (soft white)
  • Energy Used: 9.5 watts (equivalent to a 65 watt standard incandescent light bulb)
  • Lumens per Watt: 61
  • Contains Mercury: No
  • Uses 85% less energy compared to a standard incandescent light bulb
  • Recessed ceiling light. Suitable for use in dry or damp locations
  • Integrated LED light source and trim, for 4in recessed housings. (Medium E26 Edison base)
  • Dimmable: Y