Blade – 第220页 – LED Lighting Blog

1200mmx300mm 35W 10mm led panel light

1200mmx300mm 35W 10mm led panel light

Dimension	1194X294X10mm
Lighting Area	1151.9X252.9mm
Iput voltage	AC85~130V or AC170-265V 50/60HZ
Power	35W
Light source	Ultra-high brightness SMD LED & Customized as customer request
Constant Current	2000mA
Luminous flux	2000 ~ 2200LM
Centre Lux(1M)	>1300 LUX
CCT.	2700 ~ 6500K
Fixture material	Aluminum alloy 6063, Face oxidation treated, Imported acrylics panel material
PF	0.9
CRI	>70
IP degree	IP40
Controller	PMW
Temperature	-20 ~60°C
LED lifespan	50,000H

1200mmx300mm 35W 10mm led panel light Feature:

1. 80% Energy saving powered by SMD led.

2. Glare-free lighting and even brightness by Edge-lighting , using high quality light- guide plate.

3. High power efficiency which is above 100 Lm/w.

4. Special circuit layout and good heat dissipation ensure light’s long lifespan.

5. Ultra-Thin, thickness is 15.8mm.

6. No cost of maintenance and easy installation.

7. Environmentally friendly.

8. Controllable.

9. Mitsubishi brand diffusion plate and the light guide palte

10.Samsung chip
11 .leak-proof light structure

Remarks: 1.1 Making four stainless steel round davits in the ceiling, which will be the area of 1116*216MM

1.2 Getting stainless steel string go through the connecting ring, then fasten the ring with round davits

1.3 Tighten stuck string davits with panel light screwy.

1.4 Insert stainless string into stuck string davits, fasten them

The IP grade is IP40, it is free-waterproof.

In order to lengthen the lifespan, do not use alcohol or other volatile solvent clean the lamp.

Use soft cotton cloth with soapy water after wringing cleanses the lamp body.

Only professionals can decollate and fix up the light.

The lamp driver is specially adopted. Do not replace the driver without permission

High Lumen 120W IP67 Solar LED street lights

High Lumen 120W IP67 Solar LED street lights Specification:

Power Rating	120W
Input voltage	AC90-260V DC12-24V
Frequency	50/60HZ
Beam Angle	150 degree
Color Temperature	3000-6500K
Led chip Brand	Cree Epistar BridgeluxOsram
Material	Aluminum
IP rating	IP65
PFC	>0.95
Warranty	3 years
Certification	CE RoHS TUV

High Lumen 120W IP67 Solar LED street lights Feature:

1. Energy saving, environmental;
2. low price and good quality;
3 Fashion design and different types;
4. Easy to install and use;
No risk of mercury emission, environmental protection;

High Lumen 120W IP67 Solar LED street lights Technical Features:

1. US Bridgelux 45MIL led chips and high quality power supply are used, realizing long-term reliable and stable working without failure and maintenance.
2. Adopt to the lens of point,cambered surface with the newest independent research and development.It’s ultrathin,no glare,high reflectivity.
3. Lamp shell surface spraying radiation protective paint,which makes the lights antioxidant and salt-resistant.
4. Material is carbon aluminum alloy,which makes the lights high heat dissipation.
5.Inside the lights adopt to the composite high thermal module with light source, which increase lights heat conduction and dissipation .
6.Adopt to the constant current high power transform supply, PEC could reach more than 90%.

141W 5,000K Industrial LED High Bay Lights

141W 5,000K Industrial LED High Bay Lights Specification:

Lumens (Typical)†	13,940 †Tolerance +/- 10%.
Wattages	141W (at 120 VAC); 138W (at 277 VAC)
Lumens Per Watt (LPW)	99
Color Temperature	5,000K
Voltage Range, VAC	100-277V, 347-480V; 50/60 Hz
Operating Temperature	-30°C to +40°C
Lifetime	60,000 hours at +40°C
CRI	>70

141W 5,000K Industrial LED High Bay Lights Features:

Up to 69% energy savings over 400W metal halide fixtures
60,000 hours (rated life) of maintenance-free operation for labor and material savings over the life of the fixture
Two to three year payback by retrofitting four or six lamp T5HO or 400W metal halide high bay fixtures
Operating temperature of -30°C to +40°C ambient
Uniform wide distribution for optimum lighting levels for 18-25 foot mounting heights
Occupancy sensing control available for enhanced energy savings and lifetime of LED fixture
Hook and cord attachment for 3/4″ pendant hub
347-480 VAC driver option

Industrial High Bay LED Luminaires are ideal for:

Locations requiring continuous and consistent light levels
Areas requiring frequent on-and-off of lights
Areas that are difficult to relamp or that cause production to be stopped during the lamp maintenance process
Ordinary clean, light industrial production facilities, packaging facilities, and warehouses
Indoor and dry locations only

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires

High-performance LEDs and a solid-state electronic driver provide light where you need it, at a fraction of the operating costs of HID lighting technologies.

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires Specification:

Hub Sizes	3/4″ NPT; 1″ NPT; 1 1/2″ NPT; 25mm; 32mm
Wattages	80W; 100W; 130W; 151W; 175W
Voltages	120-277VAC 50/60 Hz; 108-250VDC
Body and Mounting Modules Material	Copper-free aluminum with Corro-free™ epoxy powder coat
Lens Material	Shatter-resistant, explosion proof glass
Gasket Material	Silicone
Guard Material	Stainless steel

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires Features:

Quick-connect design – install and wire the mounting module, then simply screw in the luminaire
Factory-sealed – no external sealing fittings required in Groups B, C, and D
Adapter available for connection to existing Hazard•Gard® EVI, EVLP, and EVM modules
Energy-efficient – up to 62% reduction in energy used versus equivalent HID fixtures
60,000 hours rated life – eliminates need for frequent lamp replacement
Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
T5 temperature rating
Operating ambient -25ºC to 65ºC

NEC and CEC:

Class I, Division 1, Groups B, C, D
Class I, Zone 1, Groups IIB + H2, IIB, IIA
Class II, Groups E, F, G
Class III, Simultaneous Presence

UL Standards:

UL844 Electric Fixture Hangers for Hazardous Locations
UL1598 Luminaire
UL1598A Luminaire for Installation on Marine Vessels

CSA Standard:

C22.2 No. 137

Environmental Ratings:

NEMA 4X
IP66
Marine and Wet Locations

IEC and ATEX Certifications and Protection (Pending):

Ex II 2G Ex d IIC (Zone 1, 2) (Pending)
Ex II 2D Ex tD A21 IP66 (Zone 21, 22) (Pending)

100-277V 50-60 Hz LED Floodlight Fixtures

Floodlights are designed to provide full-spectrum, crisp, white light. Five versions of the Champ FMV LED are available, providing ideal solutions for a wide range of applications.

100-277V 50-60 Hz LED Floodlight Fixtures Details:

Voltage Range, VAC	100-277V 50-60 Hz or 347/480V 60 Hz
Voltage Range, VDC	108-250 VDC
Input Power (Nom.)	64W; 89W; 121W; 149W; 179W
Input Amps (Max.)	0.550; 0.800; 1.083; 1.608
Power Factor	>0.85
Housing Material	Copper-free aluminum with Corro-free™ epoxy powder coat
Lens Material	Shatter-resistant glass

100-277V 50-60 Hz LED Floodlight Fixtures Features:

Instant illumination and restrike
Better visibility with crisp, white light
Minimum T4 temperature rating – safely operate in the most hazardous environments and any non-hazardous location
Cold temperature operation / no warm-up required
“No lights out” feature – if a single LED fails, others will remain lit from other drivers – minimum 50% output maintained
Terminals – 3 x 6 sq. mm. for IEC version
Easy installation – compact modular fixture attaches onto existing SFA6 and SWB6
Energy-efficient technology – use up to ½ the power of standard HID luminaires
Provides up to 60,000 hours rated life – eliminates need for frequent lamp replacement
Contains no mercury or other hazardous substances
Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
Operating ambient -40ºC to 55ºC
Dark sky friendly with optional visor

NEC and CEC:

Class I, Division 2, Groups A, B, C, D
Class I, Zone 2
Class II, Groups E, F, G
Class III
Simultaneous Presence
Wet Locations, Type 4X, IP66

UL Standards:

UL844
UL1598 Luminaires, UL1598A Marine

CSA Standard:

CSA C22.2 No. 137

IECEx/ATEX:

IECEx UL 11.0054X
Ex nA nR IIC T4 Gc Tamb -30°C to +55°C
Ex nA nR IIC T5 Gc Tamb -30°C to +40°C
Ex tc IIIC T68°C Dc IP66 Tamb -30°C to 40°C
DEMKO 12 ATEX 115535X
Ex II 3 G Ex nA nR IIC T4 Gc Tamb -30°C to +55°C
Ex II 3 G Ex nA nR IIC T5 Gc Tamb -30°C to +40°C
Ex II 3 D Ex tc IIIC T68°C Dc IP66 Tamb -30°C to +40°C
CEPEL Ex-1956/10

Division 1 factory-sealed Explosion Proof LED Lighting

Division 1 factory-sealed Explosion Proof LED Lighting product details:

Mounting Styles	Pendant Mount; Ceiling Mount; Wall Mount; Bulkhead Mount; Stanchion Mount
Hub Sizes	3/4″; 1″; 1 1/4″
Wattages	26W; 30W; 36W
Voltages	120-277V; 10-30 VDC
Amperages	0.30A; 0.36A; 2.8A
Housing Material	Copper-free aluminum with Corro-free™ epoxy powder coat
Globe Material	Heat- and impact-resistant glass
Gasket Material	Silicone

Division 1 factory-sealed Explosion Proof LED Lighting Features:

Instant illumination and restrike
Better visibility with crisp, white light
T6 temperature rating – safely operate in the most hazardous environments
Cold temperature operation / no warm-up required
Easy installation – compact modular fixture attaches onto existing Champ mounting module
Energy-efficient – up to 85% reduction in energy used
Provides up to 50,000 hours rated life – eliminates need for frequent lamp replacement
Contains no mercury or other hazardous substances
Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break – greatly reduces the risk of premature failure
Operating ambient -30ºC to 55ºC (AC), -30ºC to 40ºC (DC)
Dark sky compliant

NEC & CEC:

Class I, Division 1, Groups C, D
T6 temperature rating at 55°C
Class I, Zone 1 & 2, Group IIB
Class II, Groups E, F, G
Marine and wet locations, Type 4X, IP66
UL Listed
cUL Listed (certified by UL to CSA standards)

NEC:

Class III, simultaneous presence

UL Standards:

844 Electric Fixture Hangers for Hazardous Locations
1598 Luminaire
1598A Luminaire for Installation on Marine Vessels

CSA Standard:

C22.2 No. 137

Lower prices to accelerate the development of LED interior lighting

Too high price, immature technology has been the main factors hindering the popularity of LED interior lighting speed. After years of development, LED lighting technology has been greatly improved, and now is no longer a barrier to the promotion of LED interior lighting. The price, as the technology advances and market competition becomes more intense , LED products at lower prices also continued , in 2013 , the global LED bulbs to replace 60W retail price has dropped 28%.

Lower prices to accelerate the development of LED interior lighting

　　In recent years , LED lighting products prices continued to fall , and have begun to close the traditional lighting products in the field of promotion of commercial lighting applications are already very mature , and gradually into the home lighting, but in general, LED lighting products to be really into ” ordinary people home ” still faces ” universal obstacle “problem :

　　(A) The consumer overall awareness of LED lighting products is not high

June 2013 , a survey showed that Chinese consumers in the proportion of LED bulbs can clear awareness is only 25 %, so , China LED lighting market to open ordinary families still need adequate consumer education , so that ordinary household consumers LED lamps have a more full and complete understanding.

　　(B ) consumers believe that LED lighting products, ” high price “

Currently, from the consumer point of view, the price is still a cross in front of the main obstacles LED interior lighting. The primary factor as the consumer consideration, the price has been an issue of most concern ordinary people. Although in recent years, LED lighting products prices continued to fall , so far , LED lamp compared to the energy saving lamp prices remain high , while domestic consumers just can accept the basic price of 20 yuan or less , so the price is still constrained LED indoor lighting products to the main factor in popularity .

　　(C ) market disorder

In recent years, with the gradual strengthening of semiconductor lighting industry, more and more companies pour into the market. According to statistics, the domestic LED lighting companies have done thousands of basically doing outdoor lighting and indoor lighting together , these companies do not have strict market positioning , watching the government support to quickly make LED lights LED lights ,When hearing people say LED interior lighting export volume is large, it quickly made LED indoor lighting. Chaotic market order which greatly restricts the development of indoor LED lighting market.

　　(D) Quality problems of LED indoor lighting products

Higher prices and disorder market lead to the result of market quality. In the absence of a complete set of technical standards and objective evaluation mechanisms situation, just a few years there are thousands of companies to squeeze into LED lighting, natural inevitably, some manufacturers in order to try to reduce costs, cut corners, shoddy. Low quality and ultimately harm the interests of the entire industry.

NEW private mould 4W aluminum E27 led lights

NEW private mould 4W aluminum E27 led lights Specification:

1.Working Voltage:AC85-265V

2.Base Type: P45/G45

3.Power: 4W

4.Lumen per Led: 23-25

5.Led source: 23pcs/SMD2835

6.Lumens:300-350L,

7.PF>0.5

7.Material: D-casting aluminum

8.Driver type: isolating driver

9.Lifetime:30,000hours

10.Available Color: WW: 2800-3200K, NW: 4000-4500K , PW: 6000-6500K

11.Warranty: 2 years

NEW private mould 4W aluminum E27 led lights Key Features:

1.PC shell with heat sink

2.High voltage tolerance ,,able to pass 4000V safety test

3.R/C ,isolating or dimmerable driver for choice

4.Packing:blister ,color box or white box

Why choose LED lighting products from ENELTEC?

1.Operating temperature: -20 to +40 degree Celsius

2.Match the RGB controller and power supplier syste

3.Low power consumption

4.Lower heating during operation

5.Continuous length with the quickly connector

6.Reel peaking and strong adhesive back

7.Imported PC cover,transmittance over 90%, no glare

8.180° beam angle, no dark space

9.No mercury, No radition, No UV

10.Energy-saving and low cost. Can save power over 80%

40W Led Ceiling Light Fixtures LED panels

40W Led Ceiling Light Fixtures LED panels Specification:

CRI (Ra>)	75
Color Temperature(CCT)	Pure White
Working Temperature(°C)	-20 – 50
Working Lifetime(Hour)	50000
Lamp Body Material	Aluminum Alloy
IP Rating	IP20
Certification	CE, RoHS
Place of Origin	Guangdong, China (Mainland)

40W Led Ceiling Light Fixtures LED panels Feature:

1. High lumen efficiency

2. Stable performance

3. Silience driver

4. Comtemporary shape

5. Good heat emission

6. High power

7. CE&RoHS approvals

8. Slience driver

Applications

Can be widely used in living room,guest room ,private residence,villa,flat,office,store,super market,hotel and other residential house and so on.

30W E27 high power led corn light

30W E27 high power led corn light Specification:

Input voltage	85-300VAC
Power Efficiency	>90%
Light source	3528 SMD LEDs
Power Consumption	30W
Power supply	4W
LED luminous efficiency	95 lm/w
LED initial Flux(instant on)	3200lm(Tj=25°C)
LED lamp maintain flux	3100lm(Tj=70°C, Ta=25°C)
Lamp’s efficiency (%)	>95%
Warm white	2700-3500K
Nature white	4000-5000K
Cool white	5500-6700K
LED QTY	510 LEDS
LED lamp life	50,000 hours
Dimensions	90*218mm
N.W/G.W	345g/478g
IP Rating	IP 65
Packing	1pc/white box, 18pcs/ctn
Carton size: single piece/18 piece	251313cm/ 554336cm
Replacement	90W CFL/120W HPS

30W E27 high power led corn light Features & advantages:

1. It’s major to replace the CBL with screwed lamp base directly.
2. 80% more energy saving compared with conventional street light, CBL, Incandescent light.
3. Estimated lifespan: >50, 000 hours
4. Pure white color/Warm white color, high CRI with great directionality
5. Fast turn on, no warm-up or cold start problems
6. Solve 4 difficulties for LED packaging, heat sinking, operational lifespan, luminous efficiency
7. Special surface design with arc, make sure the radiation diameter on the ground is accord
with the standards for size.

Advantages:

1. Beam angle: 360°
2. Professional LED lamp replacing CFL 130W
3. Size: Dia 65mm * 210mm
4. Lamp base: E40 E39 E27 E26
5. Input voltage: 100-300VAC
6. Power consumption: 34W ±10%
7. LED source: 648pcs 3014SMD LEDs
8. Color temperature: 1)Cool white: 5500~6700K 2)Natural white: 4000~5000K 3)Warm white: 2700~3500K
9. Luminous flux: 3200lm ±10%

10. Application:Indoor using, such as warehouse lobby,office, supermarket,restaurant ,etc..

11.Operating temperature: -40~50°C

LED Lighting Blog

Eneltec Group published articles about LED lighting business, LED applications, LED industry, LED Supplier, LED technical, any other LED things.

作者：Blade

1200mmx300mm 35W 10mm led panel light

High Lumen 120W IP67 Solar LED street lights

141W 5,000K Industrial LED High Bay Lights

factory-sealed LED luminaire for general illumination Explosion Proof LED Luminaires

100-277V 50-60 Hz LED Floodlight Fixtures

Division 1 factory-sealed Explosion Proof LED Lighting

Lower prices to accelerate the development of LED interior lighting

NEW private mould 4W aluminum E27 led lights

40W Led Ceiling Light Fixtures LED panels

30W E27 high power led corn light