作者：Blade

Notice on Purchasing LED Fluorescent Lamp

Compared with traditional fluorescent tubes, LED fluorescent tubes enjoy relatively low people awareness. ENELTEC here is reminding you that when purchasing LED fluorescent tubes, you should pay attention to some issues to avoid poor quality LED lamp which may cause your loss and even affect your safety.

Notice on Purchasing LED Fluorescent Lamp

1. See the packaging and label

It is compulsory for LED lighting manufacturers to mark the following items on the packaging: rated voltage range, rated power, rated frequency. Under normal circumstances, LED fluorescent lamp printed in high quality is of better quality and the printing is very clear. It is not easy to fall off. The logo, trademark and related certification mark are still very clear even scrubbed with a soft damp cloth

2. See the surface of the LED light

From the perspective of the lamp, the shape and size of LED fluorescent light is more consistent in product consistency, thus better quality assurance. Of course, there should be no cracks on the surface and the loose connection between the interfaces. Since ordinary plastic deformation and flammable, LED tubes must use the kind of engineering plastics flame retardant PC plastic shell. And aluminum tube must be bright, aviation aluminum.

3. Working temperature: The temperature should be low when LED fluorescent light is working. Otherwise, its life will be very short. Meanwhile, the flashing and rapid fluctuation of energy saving light when it is first lit indicates the existence of quality problems. Energized after a few minutes, the increasing temperature proves that the heat dissipation is good with the aluminum plate heat. If the temperature does not increase, it indicates that it is fiberglass panels, thus the heat does not come out.

4. See the startup performance: one of the special features of LED fluorescent light is that the moment it is linked to the power, it shines immediately with no flicker.

5. LED fluorescent light can be measured by weight. The heavier the light is, the better the quality. This is because heavy light may be made with good materials.

LED Tube Light with 100 to 240V AC Input Voltage

LED Tube Light with 100 to 240V AC Input Voltage

LED Tube Light with 100 to 240V AC Input Voltage

specifications:

  • Standard length: 60, 120 and 150cm
  • Power consumption: 25W
  • PF (power factor): >0.9
  • Light efficiency: >95lm/W (clear and wave cover)
  • CCT (color temperature) range:
    • Cold white: 6,000K
    • Commercial white: 4,000 to 5,000K
    • Warm white: 3,000 to 3,500K
  • Rated input voltage: 100 to 240V AC, maximal input
  • Voltage: 277V AC, 12/24V DC available

Features:

  • Much longer life than CFL tube: 10 years (minimum) (suppose 8-hour on per day)
  • 70 to 80% energy-saving over fluorescent tubes
  • Solid state, high shock/vibration resistant
  • Work without ballast
  • No RF interference
  • No flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Instant soft-start
  • Minimum maintenance costs
  • Produces little heat
  • No mercury or other hazardous materials, fully RoHS Directive-compliant
  • Continuous operation for white LED (10 years for other colors)
  • Rated to operate from -20 to 40°C
  • Epistar + Intermatix LED packaging solution, no patent trouble

ENELTEC remind you:If you want to know more about other products, please contact us.

Dimmable LED T8 Tube 100 to 240V AC

Dimmable LED T8 Tube 100 to 240V AC

Dimmable LED T8 Tube 100 to 240V AC

Specifications:

  • Standard length: 60, 120 and 150cm
  • Rated input voltage: 100 to 240V AC, 50 to 60Hz
  • Minimum input voltage: 277V AC
  • Light efficiency: >95lm/W (clear and wave cover)
  • Power factor: >0.93
  • Cool color temperature:
    • White: 5,500 to 6,500K
    • Commercial white: 4,000 to 4,500K
    • Warm white: 3,000 to 3,500K

Features:

  • Customized designs are welcomed
  • Built-in driver with reliable performance and long lifespan
  • UL- and TUV-certified circuit design
  • No risk of electric shock during installation
  • Compatible with existing inductive ballast fixtures, reducing installation cost and maintaining the warranty of the whole fixture
  • High brightness LEDs
  • Efficient heat dissipation

ENELTEC remind you:If you want to know more about other products, please contact us.

T8 LED Tube with 180 degrees rotatable end caps

T8 LED Tube with 180 degrees rotatable end caps

T8 LED Tube with 180 degrees rotatable end caps

Specifications:

  • Input voltage: 100 to 240, 277V AC, 12/24V DC
  • Light efficiency: >95lm/W (clear and wave cover)
  • Power factor: >0.93
  • Color temperature range:
    • Cold white: 6,000K
    • Commercial white: 3,000 to 3,500K

Features:

  • 180 degrees rotatable end caps and convenient user’s installation
  • Much longer lifespan than CFL tube: 10 years (minimum), suppose that light is on 8 hours/day
  • 70 to 80% energy-saving over fluorescent tubes
  • Solid state, high-shock and vibration resistance
  • Working without ballast with instant soft-start
  • No RF interference, flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance costs produce little heat
  • No mercury and other hazardous materials
  • RoHS directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated temperature: -4 to 104°F (-20 to 40 degrees Celsius)
  • Perfect for environments with extreme climates
  • Epistar and Intermatix LED packing solution, no patent trouble
  • Newest designs
  • Best cost-effective
  • Complete electricity isolation design, safety prove

ENELTEC remind you:If you want to know more about other products, please contact us.

T8 LED Tubes with 70 to 80% Energy-saving

T8 LED Tubes with 70 to 80% Energy-saving

T8 LED Tubes with 70 to 80% Energy-saving

Specifications:

  • 70 to 80% energy saving over fluorescent tubes
  • Solid State, high shock/vibration resistant
  • Work without ballast, instant soft-start
  • No RF interference
  • Quick and easy installation to minimize retrofit costs
  • No mercury and other hazardous materials, fully RoHS Directive-compliant
  • Continuous operation for white LEDs (10 years for other colors)
  • Rated to operating: -4 to 104°F [-20 to 40°C]
  • The newest design
  • The best cost-effective
  • Complete electricity isolation design
  • ETL certification

Technical parameters:

  • Standard length: 60, 120 and 150cm
  • Rated input voltage: 100 to 240V AC, 50 to 60Hz
  • Voltage: 277V AC
  • Power factor: >0.9
  • 12/24V DC is available
  • Light efficiency: >95lm/W

ENELTEC remind you:If you want to know more about other products, please contact us.

Notice on the Replacement of LED tube lights

The replacement of traditional lamps with LED tubes is very simple. Basically it can be directly replaced with the right lamp base and voltage. But there are still some other problems needing attentions.

Notice on the Replacement of LED tube light

1. The installation of LED tube lights: LED has constant current source in itself. Hence, there is no need for ballast and starter. Generally, constant current source can be installed inside lamps above the size of T8 because the inner space is big enough. Therefore, during installation, the original rectifier and starter could be removed and install the fluorescent lamp directly.

2. The voltage of LED tube lights: Although the fluorescent lamp of Geri photovoltaic has a wide voltage adaptability ranging from AC 85V to AC 245V, it will affect the power factor of constant current source if the voltage is too high or too low in the long-term. That is to say, it will cause a slight impact on energy saving efficiency and on the lifespan of constant current source. Therefore, it is generally better to choose fluorescent lamp in appropriate voltage. For instance, if the local voltage of a place is 110V, you should choose our specially designed 110V fluorescent lamp.

3. The cooling ability of LED tube: lamp produced in Geri photovoltaic has an aluminum radiator shell. Under normal circumstances, the heat dissipation is not a problem. However, if used in a dusty place, you should clean the dust regularly to prevent the dust from covering the radiator, thus affecting the heat dissipation.

4. LED tube lights is waterproof: it is made up with the upper part and the lower part. The upper part is an aluminum radiator and the lower part is a light sphere. Since there are gaps in the joints, it is important to prevent fumes and water vapor from entering into the gaps. If it is used under heavy fumes and water vapor, a protective cover is suggested (general protective cover is okay).

5. The quake-proof ability of LED tube lights: it has a strong anti-shock ability. It usually causes no damage if the knock is not very violent. But it may cause some impacts on the soft board. While traditional fluorescent lamp is made up of glass and inside the lamp is almost vacuum, vibration may cause explosion. Therefore, particular attention must be paid to it.

T8 LED Tube Lights Intematix LED Packing Solution

T8 LED Tube Lights Intematix LED Packing Solution

T8 LED Tube Lights Intematix LED Packing Solution

T8 LED Tube Lights Intematix LED Packing Solution Quick and easy installation to minimize retrofit costs,Complete electricity isolation design, safe.

Features:

  • Much longer lifespan than CFL tube: minimum of 10 years (suppose that light is on 8 hours/day)
  • 70 to 80% energy-saving over-fluorescent tubes
  • Solid-state, high-shock/vibration-resistant
  • Can work without ballast, instant soft-start
  • No RF interference, no flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance cost, produce little heat
  • No mercury and other hazardous materials with the RoHS Directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environment with extreme climates
  • Epistar + Intematix LEDs packing solutions, no patent trouble
  • The newest design
  • The best cost-effective
  • Complete electricity isolation design, safe
  • ETL certification

Technical parameters:

  • Standard length
  • Rated input voltage: 100 to 240V AC, 50 to 60Hz, 277V AC (maximum)
  • Power factory: >0.9
  • 12/24V DC is available
  • Light efficiency: >95lm/W (clear and wave cover)

ENELTEC remind you:If you want to know more about other products, please contact us.

T8 LED U Tube with 18W Power and 168 Pieces LEDs

T8 LED U Tube with 18W Power and 168 Pieces LEDs

T8 LED U Tube with 18W Power and 168 Pieces LEDs

Applications:

  • With high-luminous flux and wide beam angle
  • U-shape tube is widely use in corridors, courtyard warehouse offices, hospitals, schools, factories, commercial lighting, shopping malls and more

Features:

  • High-luminous efficiency, more than 100lm/W
  • 80% energy-saving
  • Replace to 100W halogen lamps
  • Main materials: aluminum + PC
  • Minimum maintenance costs, produce little heat
  • No mercury and other hazardous materials, fully RoHS compliant
  • Continuous operating for white LED (10 years for other colors)
  • 20 to 40°C, perfect for environment with extreme climates
  • Epistar + Intematix LED packing solution, no patent trouble
  • The newest design
  • The best cost-effective

Technical parameters:

  • Rated input voltage: 100 to 240V AC, 50 to 60Hz
  • Maximal input voltage: 277V AC
  • Power: 18W
  • Beam angle: >120° (indicated in the picture)
  • Light output:
    • Cold white (6,000K): 1,889lm (clear cover)
    • Cold white (6,000K): 1,702lm (frosted cover)
    • Warm white (3,070K): 1,803lm (clear cover)
    • Warm white (3,070K): 1,674lm (frosted cover)
  • Cover: PC clear/PC frosted
  • Base type: T8
  • LED quantity: 168 pieces (3014)
  • IP grade: IP20
  • Rated to operate from -4 to 104°F (-20 to 40°C) perfect for environment with extreme climates

ENELTEC remind you:If you want to know more about other products, please contact us.

T8 LED Tube Lights with 12/24V DC Available

T8 LED Tube Lights with 12/24V DC Available

T8 LED Tube Lights with 12/24V DC Available

T8 LED Tube Lights with 12/24V DC Available Top quality at very competitive prices.  Expedited service for volume orders. Save energy.  Save maintenance and energy $$.

Features:

  • Much longer lifespan than CFL tube: minimum of 10 years (suppose that light is on 8 hours/day)
  • 70 to 80% energy-saving over-fluorescent tubes
  • Solid-state, high-shock/vibration-resistant
  • Can work without ballast, instant soft-start
  • No RF interference, no flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance cost, produce little heat
  • No mercury and other hazardous materials with the RoHS Directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environment with extreme climates
  • Epistar + Intematix LEDs packing solutions, no patent trouble
  • The newest design
  • The best cost-effective
  • Complete electricity isolation design and safe
  • ETL certification

Technical parameters:

  • Standard length
  • Rated input voltages: 100 to 240V AC, 50 to 60Hz, 277V AC (maximum)
  • Power factory: >0.9
  • 12/24V DC is available
  • Light efficiency: >95lm/W (clear and wave cover)

ENELTEC remind you:If you want to know more about other products, please contact us.

60, 120 and 150cm T8 LED Tubes

60, 120 and 150cm T8 LED Tubes

60, 120 and 150cm T8 LED Tubes

60, 120 and 150cm T8 LED Tubes Much longer lifespan than CFL tube: minimum 10 years (at an average usage of 8 hours per day).Quick and easy installation to minimize retrofit costs.

Features:

  • Much longer lifespan than CFL tube: minimum 10 years (at an average usage of 8 hours per day)
  • 70 to 80% energy-saving over-fluorescent tubes
  • Solid state, high-shock/vibration resistance
  • Work without ballast
  • No RF interference, no flickering or buzzing
  • Quick and easy installation to minimize retrofit costs
  • Minimum maintenance costs, generates little heat
  • No mercury and other hazardous materials, fully RoHS directive-compliant
  • Continuous operating for white LEDs (10 years for other colors)
  • Rated to operate from -4 to 104°F (-20 to 40°C), perfect for environments with extreme climates
  • Epistar + intimate LED packing solution, non patent-infringing
  • Modern design
  • Highly cost-effective

Specifications:

  • Standard length: 60, 120 and 150cm
  • Rated input voltage: 100 to 240V AC, 50 to 60Hz
  • Input voltage: 277V AC (maximum)
  • Power factor: >0.91
  • 12/24V DC is available

ENELTEC remind you:If you want to know more about other products, please contact us.