ENELTEC Ultra Slim LED Panel Light adopts qualified super bright LED as light source, which is stable, long life and no UV & IR emission. The anodized aluminum frame is stylish and fashionable with everlasting color. It is powered by low voltage constant current driver, which is safety, energy saving and long life.
LED Panel light is the ideal replacement for traditional grid lights and fluorescent tubes. Moreover, ENELTECLED Panel light creates extremely harmonious and uniform lights, which conventional light never achieved.
Street lighting is an important part of the city, the conventional high-pressure sodium lamp is often used, high pressure sodium 360 degree light, light loss caused major shortcomings huge waste of energy. Currently, the global environment is deteriorating, countries are developing clean energy. With the rapid growth of the national economy, China’s energy supply and demand have become increasingly prominent, there is a serious power supply began to shortages of energy is urgently needed to solve the problem. Therefore, the development of new high efficiency, long life, high CRI, environmentally friendly energy saving LED street lighting of the city has a very important significance.
LED street lamp suppliers rank
LED street lights with conventional high-pressure sodium lamps is different, high power LED street light with low voltage DC power supply, the power-type GaN-based blue LED with yellow phosphor synthesized efficient white light diodes, high efficiency, safety, energy saving, environmental protection, long life fast response, high CRI unique advantages, can be widely used in urban road lighting. Housing available PC pipe production, high temperature of 135 degrees, low temperature of -45 degrees.
As the world’s most high-profile of the new generation of light, LED because of its high brightness, low heat, short-lived life, non-toxic, recyclable applications, etc., are known to be carried out in the 21st century’s most promising green lighting.
From 1962 the first red light only since the birth of the semiconductor light-emitting diodes, people continue to develop orange, yellow, green and other color LED, and for a variety of signal indication, logos, digital display, and gradually developed into a small LED display, etc. . It uses solid semiconductor chip as light-emitting materials, when the release of excess energy, causing the photon emission, can be applied to produce a semiconductor light source PN junction is made of the LED, came in the early 1960s, in 1964 successfully developed the first red light-emitting diode, yellow LED appears.
America is currently estimated that about 36 million lights, the end of last year, the United States LED lights penetration rate of about 6%, from around the United States government released tenders situation, this year’s estimated market size of the amplified standard case 40 to 45 % this year, before the end of the LED street light penetration is expected to grow to 10 percent, the company outlook with the market performance this year will also be expanded and stable growth of 40 to 45%, the future still has much room for growth.
Compared to Taiwan and mainland China, in fact, higher tariffs in Europe and America, and in the high tariff environment, both the Government and the people for saving products is relatively felt, especially in the United States every continent the high cost of public electricity costs, not Central Government to promote, local governments will actively carry out street lights replaced less multilayer barriers hinder government, the U.S. replacement market development speed street representing Taiwan and China will be more rapid.
In addition to the U.S. market, the industry is also optimistic about the development of the European lamp replacement market, especially in Europe, the government is limited by the current poor economic conditions, the real opportunities not replace fermentation, now is the layout and each industry to prepare in advance a good time, once the European economy improved, replacing the huge business opportunity ensued, Taiwan LED industry can replace the opportunity to compete for the lights of the battlefield, it is no longer only the Chinese mainland.
The VR 150 LED Flood light features a stylish and compact design. The series is suitable for architectural and stage lighting and can be used for both interior and exterior applications (IP-65 rated). The housing is made of aluminium alloy and is gasket sealed. The unit is equipped with 215 Ultra bright 10mm LED’s and controlled via DMX or the optional infra-red remote control.
Features
Suitable for Outdoor/Patio/Garden Lighting
Control: DMX 5 channels or infra-red remote (optional)
Remote features: Auto run, DMX, Master/Slave and Sound Activated
IP Rating: IP-65 (Totally protected against dust, Protected against low pressure jets if water from all directions – limited ingress permitted)
Heavy duty aluminium construction
Adjustable mounting brackets
Static colour mixing
RGB colour mixing
Master/slave
215;Ultra bright 10mm LED’s ( R:48, G:84, B:83 )
Power consumption:24 watts
Beam: 40 degrees
Lamp life: 100,000 hours
Specification
Power supply: 240v
Dimensions: 295 x 207 x 185mm
Weight: 4.05kgs
If you want to know more about other products, please contact us.
This new member of the LED stage light retains all the great features of the Slimline 229 but has combined its breakthrough Tri Colour LED technology with a compact-profile Stage Par Can. Measuring just 79mm in depth this unit has been designed so it is easy to transport and install, even in locations with limited space. The 4 button digital display on the rear of the unit is simple to use and allows the user to create the desired atmosphere with the wide variety of features offered including DMX, Sound active and Master/Slave modes.
Thanks to its cutting edge Tri Colour LED technology, the unit produces superior mixed colours to those created by conventional LED RGB par cans. Each of the 3W LEDs is actually a 3 in 1 lamp, comprised of 3 different coloured LEDs: 1W red, 1W green and 1W blue. This allows RGB colours to be created within each individual lens, so that all 7 lamps remain on during the colour mixing process. The result is smoother, more even mixed colours, without the distracting multi-colour shadows that tend to appear around objects illuminated by RGB fixtures with single-colour LED lamps.
The Chauvet SlimPAR 56 is a traditional LED PAR can housed in a casing that is only 2″ thick, which allows it to go where other PAR cans don’t fit. Powered by 108 red, green, and blue LEDs, the LED PAR can offers 3- or 7-channels of DMX control. It also provides static colors and red, green, blue color mixing with or without a DMX controller. Built-in automated and sound-activated programs operate in either master/slave or DMX mode. The Chauvet SlimPAR 56 DMX PAR can also features a variable speed pulse effect and a double-bracket yoke that can also act as a floor stand.
The Lighting LED Par 64 features 177 10mm LED lights (60 red, 56 blue, and 61 green) for a nice, affordable addition to any lighting rig. Giving you choices, this LED PAR light can run in DMX mode (7 channels) or auto mode RGB. It also has a color strobe effect, electronic dimming from 0 to 100%, and it includes a hanging bracket so you can hang it where you most need it.
Features
LED PAR 64 with RGB color mixing
DMX mode (7 channels), Auto Mode RGB
177 10mm LEDs (60 red, 56 blue, 61 green)
100,000 Hours rating
Color strobe effect
Electronic dimming: 0-100%
Includes hanging bracket
LED PAR 64 Light Specifications:
Power: 120V 50/60Hz
Dimensions: 7.5″ H x 10.5″ D x 7.5″ W
Weight: 4.7 lb.
If you want to know more about other products, please contact us.