作者：Blade

Hitachi will be listed on the brightness which is equivalent to 80W incandescent warm led bulbs

Engaged in the production of home appliances, air conditioning and lighting apparatus, Hitachi Group will be listed in the industry on June 15, the brightness is equivalent to 80W incandescent bulbs(pure white). We support the normal E26 lamp mouth. The new products like incandescent bulbs. The light can spread wide with the warm led bulbs. After 60W incandescent light bulbs replaced by this product, it can not only improve the brightness, but also substantially reduce power consumption.

Except the high efficiency LED Street Light module, it adopt using of the distribution of the simultaneous inhibition of uneven illumination lamp shades, so as to achieve the same brightness and wide range of light with 80W incandescent. The brightness is 1160Lm, the power consumption of 11.4W. Listed on the same time, the brightness is equivalent to the 60W power consumption of the same LED High bay Light bulbs.

With the bightness quivalent to 80W incandescent bulbs, the power is only 11.4W, so the original support 60W and 40W incandescent bulbs in lighting fixtures can be used, just to replace, that can be improve brightness, energy-saving. Light as  incandescent bulbs can be divergent,  so whether it is hanging or mounted on the wall, the lighting will diverge in all directions and illuninate the place where warm led bulbs cannot enlight in the past.

Compared to 60W incandescent bulbs, the power consumption reduced from 54W to11.4W. The life extended from 1000 hours to 40,000 hours, which is 40 times more than the previous age. Thereby reducing the number of replacement. It can also used in the Closed apparatus in the bathroom etc. Appliances can also be used. Hitachi, electrical plan, the two species together, the initial monthly output is 70000. Due to the high energy efficiency and environment awareness. Warm led bulbs are popular. Faced with such situation, the company will achieve differentiation by the brightness and wide light distribution business.

Japanese LED lighting development accelerated

Japan is the earliest country to announce banning the incandescent lamp, and also is the fasteat growing region in solar energy led lighting. In particular, the 3 • 11 large earthquakes and nuclear power plant crisis as a powerful catalyst, along with  the Fukushima nuclear disaster from power saving measures. Energy conservation in Japan is like a strong wind came in,  in 2011, Japan’s penetration rate of LED lighting upgrades significantly. Japan has become one of the world’s hottest LED high bay lighting market.

Throughout the LED lighting market in Japan, not only from the government subsidies and incentives, such as chip giant, Panasonic, Toshiba etc international companies that are very acceptable to LED products. These factors prompt the Japanese solar energy led lighting market which is maturing. With the rapid development of LED lighting industry, the huge opportunities in Japan market become the focus in LED industry. How to grasp the needs and to fully prepared for the LED Street Light market, how to talent showing itself on this opportunities are become the curiosity projects. The sense of quality is Japan market is strong, so it is not easy to enter into Japan market, but after the Japan’s market is mature, it is more difficult to break into. one business manager who are proposing developing Japan’s market said that. ” On this period, our worker are overtime production. It is surprised that the needs of Japan’s market is huge as it just open in the first of this year. We can see that the lighting market in Japan are changing.” Another LED enterprise manager told us who are rush to finish an order told to reporter.

Japanese LED lighting development accelerated

It is well known that in the Asian’s solar energy led lighting market, the first argument by Japanese market is quite common. While Japan 3 • 11 large earthquakes is undoubtedly an large force to accelerate LED lighting market in Japan. Under the influence by lacking of electricity, the development in LED lighting market seems out of people’s expectation. Today’s Japan, it is more urgent to saving energy and improving the utilization of renewable energy. The former bright lights of the “prosperity” scene is no longer.

ultraviolet led bulbs application

With the widespread use of LED’s and performance improvements, a new lighting revolution is about to sweep the world, people look forward to the overall lighting of the LED scene (ultraviolet led bulbs)  change will bring advantages to the people, which is also worthy of our attention.

LED Street Light is more convenient in terms of brightness, color temperature, color controllable adjustable. Lighting development of human society can be divided into three stages. The new stage is the LED street light for lighting like (ultraviolet led bulbs), lighting on the new stage. The tricolor LED allows any visible color can be changed at any time. And in the brightness, color temperature regulation and more convenient.

LED stressed that the overall effect of the change in the past a single lighting
Lighting in everyday life are usually single or partial lighting, but it does not reflect the overall effect. LED small size, can be installed in the building materials, decorative materials and work in the Fine Arts in goods. The semiconductor light-emitting diode bulbs material, so very small, this light-emitting device can do, to achieve nanometer order of magnitude, while the long life of LED lights, more energy efficient.

LED lamps using the wisdom of switching to the scene effect a more coordinated
General lighting in general is a switch to control a lamp. Order to emphasize the overall lighting effect, the LED tubes light source according to different scenarios requirements control the design of different lighting effects. It is only through the intelligent switch of scene selection to achieve a coordinated lighting effects.
ultraviolet led bulbs application
LED can be arbitrary arrangement in the scene as a whole lighting
For example, incandescent, fluorescent, halogen, high pressure sodium lamps, mercury lamps and other radiant heat and gas discharge lights, the use of non-safe voltage, only in a fixed position layout, the variable is limited

LED light source can be solar, wind and other green energy drive
The world are working on solar, wind or other forms of green energy supply, and inexhaustible. Just as LED power for (ultraviolet led bulbs) is relatively small, high luminous efficiency, low voltage, DC, suitable for solar-powered. LED light source is a low-load light, and greatly promote the development of solar energy industry. At this stage have vendors fight to illuminate the LED lighting systems can use solar powered separately, you can launch the application to remote areas limited by the electricity supply environment.

LED lighting will change people’s concept of lighting
In life, the light have a major impact on the mentality of people, three-color LED brightness, grayscale, color, continuous transformation and selection. Of Fine Arts in history, humanities, and personality requirements to the scene, and a different understanding of the environment and living at different times to choose a different overall lighting effects, creating different light effects atmosphere.

2012 high efficiency led lighting starts to enjoy 30% for the users of financial subsidies

China released to phase out incandescent route map in October 2012, at that time, most people believe that the energy saving light will replace incandescent. Just six months later, the semiconductor lighting for a more energy efficient lamp has been entering a large scale into the market.

Spend $ 40 billion for LED Street Light lamps procurement users to provide 30% financial subsidy

The strength of LED lights energy saving are obvious: compared with the same brightness, the 3W LED energy saving lamps spent 333 hours to consume 1 kWh of the electricity, while the ordinary 60W incandescent spent 17 hours to consume 1 kWh of the electricity, the ordinary 5W energy saving lamps consume 1 kWh of electricity.  Moreover, the LED lamp life is 5-6 times than the energy-saving lamps. “If  you do not consider  material aging factors,an LED may be used more than 20 years.” BOE Technology Group Vice President Li said.

High efficiency led lighting technology and the products have matured. “12th Five-Year” period , the unit of Guangdong Province, mainland GDP carbon dioxide emissions decreased by 19.5%target. For this reason, Starting from March 1, 2012, all financial investment in Guangdong province develop lighting project, all public lighting shall be using LED lights.

March 20, 2012, organized by the Ministry of Finance, National Development and Reform Commission, Ministry of Science and Technology 2012 semiconductor lighting products, financial subsidies to promote the project” in Beijing,  mainland public tender, 110 companies from all over the world have nearly 300 bids representatives participated in the tender. China Development and Reform Commission has made clear that in 2012 the Chinese government will spend 40 billion yuan t0 the procurement of LED street lamp and to th30 percent of financial subsidies for the users of high efficiency led lighting.

The subsidy policy will not only boost the LED lighting market, but also stimulate the demand for civilian use LED lighitng. The insider believes taht the real start of the domestic LED high bay lighting market will commence later this year.

The reshuffle of Large international companies, mergers and acquisitions is inevitable, so LED small businesses is hard to compete.

As a barometer of the high efficiency led lighting industry, the Guangzhou International Lighting Exhibition of data also shows signs of this, according to the organizers of Guangzhou Guangya Messe Frankfurt Co., Ltd.General Manager Mr. Hu Zhongshun said, the exhibition held in this year will not only expand the scale of 220,000 square meters, and 500 well-known listed companies, have to snatch a large booth in preparation for the second half of the industry to warm up.

What is the most appropriate led lighting price?

LED lighting is gradually entering the main stream lighting applications. The LED Street Light market demand has also entered a critical period. Huge market prospects stimulate foreign and domestic enterprises to seize the lighting market, and the competition is intensifying.  “Channel, the brave first” . The docking of the LED lighting customers reply on the channel, the channel is the premise of the growth  of the industry acceptance and promotion efforts on the led lighting price. Channel construction is also the important catalyst.

Whether it is self-built channels or to help dealers develop engineering and distribution market channel are the focus of attention of every enterprise. Many companies have the interest and attention Merchants channel construction, enterprises encountered the following problems by our research enterprise.

1、A lack of experience. led lighting price is an emerging industry, its industry characteristics is strong, but the experience which can learn from is less. At present, there is no available channels for investment charter to follow.

2、The low awareness. Many consumers do not really understand LED lamps, on the whole LED industry awareness, it is low, which is directly led to many distributors lacking of confidence. LED product has not fully recognized and accepted by store, and even the showroom and LED exclusive shop.

3、The shortage of product categories. Types of LED lighting products at this stage is relatively small, not enough to hold up the store. When consumers purchase, there is not much choice for them to choose, that is also the reason why a lot of LED brand has yet to LED exclusive shops.

4、Led lighting price are generally high. This is the bottlenecks of LED channel investment, which is constrained by high prices and leading to a lot of consumer to avoid purchase it. Therefore, enterprises should lower the threshold to paste the price that consumers can accept.

5、The unformed service system. Once the channel is formed, it means that on all aspects from production to sales should be done smoothly, but the LED professional personnel, whether it is professional sales staff or maintenance staff, are very shortage. At the same time, retailers should take into account all the factors.

uk led lights with flexible led

In order to solve the technical bottleneck of neon exist, some of the lighting company began as early as the end of last century a lot of manpower, material resources, the introduction of multiple resources to R & D focus on the LED tube lights. After a long period of study and experiment, in 2005, we found a flexible LED neon,  solve the problem of uneven general LED hose light line and continuous, such as uk led lights.
uk led lights with flexible led
LED Neon Flex is a specialized linear light decoration that looks like nothing difference with the ordinary neon, but it can be bent arbitrarily, with good flexibility, has broken resistance and water resistance, in both indoor and outdoor can be used.

Compared with the traditional neon LED Flexible Neon has the following application advantages:
1, the traditional neon could work only at room temperature,  need high voltage, power consumption, high cost, inconvenient maintenance. LED Neon flexible has the same brightness with much lower power consumption.
2, the life of the traditional neon limited by a variety of external conditions, and shorter life span and are easily damaged. And the LED Products is longer than the life of traditional light bulbs, LED Flexible Neon like uk led lights also has a shock-proof, heat-resistant features.

3, the use of traditional neon high voltage to stimulate the inert gas in the glass tube, along the outline of the font pattern hair monochromatic light, the two colors you need two sets of glass tube. The font is too large, the middle of strokes does not shine; too small, too complex, the processing does not come out. Flexible neon operating voltage is only 24V, the distribution of low-calorie, installation can also be cut to any length, bent into different shapes easily installed together with a special track with a different surface, according to the needs of the designer’s design decorated in different patterns.

At present, the lighting companies of the world R & D investment in the LED Lights very well, lighting production, the scale of large-scale, and continued to grow this stage LED industry is highly competitive, take some time for the transformation and upgrading, do not all manufacturers are able to do so. Under the tide of economic globalization, LED lighting such as uk led lights to really create his own  market, master own technology is the most important.

problems of using led grow lights

Currently, more and more lighting products use LED, such as LED lamps, LED Lawn Light, LED spotlights, LED underwater lights, the LED ground lights and so on. While everyone has a better understanding of energy-saving LED light source, long life, no radiation (green light), etc., but several key issues related to LED products (using led grow lights) also need to pay attention:

1, DC constant current power supply
LED products dedicated switching power supply (constant current source)-powered LED products will not affect the life of the product, but the product cost is relatively high.

2, to make anti-static measures
Different level of quality LED products, antistatic aspects are not the same, so the LED products to be used in the production process in the processing of certain anti-static measures: workbench ground, wear anti-static clothing, with anti-static ring with anti-static gloves, a conditional can be installed on anti-static ion fans, but also to ensure that the humidity around 65%, so that the air is too dry to produce static electricity, especially the green LED, it is relatively easier to be damaged by static electricity.
problems of using led grow lights
3, temperature cause the LED internal resistance smaller
When the outside ambient temperature, the LED light (using led grow lights) source resistance will reduce the choice of the constant current source to ensure that the LED current is independent of outside temperature.

4, Sealing of LED products
Used in the outdoor LED products are facing a waterproof, moisture-proof seal, if not handled properly it will directly affect the service life of LED products. Traditional epoxy “watering” way to seal the LED products, this approach is too much trouble, would cause an increase in the weight of the product.

The quality of the LED products currently on the market and the poor, good quality LED light source with high brightness, the light fades, the antistatic ability, long life, but cheaper than the price of a few times. Although some LED lighting project using low-quality low-cost LED light source will not find any problems, but will soon be “incomplete arrhythmia, manufacturers and users not on price” flame “. Selection of affordable, good quality LED light (using led grow lights) source, to ensure the life of the lighting project.

uv led grow light in led sorting

The initial LED is mainly used to sort the lights, and generally a single device, so the wavelength separation and brightness control does not require a high. LED normally in accordance with the dominant wavelength, luminous intensity, luminous flux, color temperature, operating voltage, reverse breakdown voltage of several key arguments for testing and sorting. LED Lights testing and sorting is a necessary process in the LED production (uv led grow light) process, but also an important part of the LED chip production and packaging costs.LED sorting in two ways: First, the chip-based separation, the second is the separation of packaged LED.
uv led grow light in led sorting
Chip test sorting in two ways: One way is to test the sorting done by the same machine, its advantages are reliable, but is very slow, low capacity; Another method is to test and sorting by the two machine to complete, test equipment records the location of each chip and argument, then passed to a sorting device for quick sorting, the advantages of doing so is fast, but the drawback is that the reliability is lower than the right, error-prone because usually there are two steps between the testing and sorting substrate thinning and chip separation process, in this process, epitaxial wafers may be fragmentation, partial incomplete fragmentation or partial incomplete, making the actual chip decentralized and does not match the information stored in the sorter, resulting in the separation difficult. The chip testing a fundamental solution to the bottleneck problem of sorting is to improve the uniformity of the wafer.LEDs can be packaged in accordance with the wavelength, luminous intensity, light-emitting angle and voltage of the test separator. The increasingly high demand for LED Street Light early sorter is 32Bin, later increased to 64Bin now the 72Bin commercial sorting machine. Even so, these LED technology (uv led grow light) indicators are still unable to meet production and market demand.The large display screen or other high-end applications users require a higher quality of the LED. In particular, is very strict requirements of the wavelength and brightness consistency. LED packaging factory for uv led grow light in the chip procurement stringent requirements, these packaging plants in a large number of package will find packaged LED only a small number of products to meet the requirements of a particular user, most of the rest will become the stock in the warehouse. This situation forced the stringent requirements in the procurement of the LED chip, LED high bay packaging factory is characterized by wavelength, brightness, and table-voltage indicator.

Multiple factors impede the road of led lighting energy efficiency

For the led lighting energy efficiency, why not join the retail business? Is the lacking of awareness of retail enterprises in Dongguan on the LED street light caused? Recently, the reporter visited, many factors have led to the retail energy saving road being stranded temporarily.

One Factor: the difficulty of pre-huge amounts of money invest into 

“Too much capital invested for the first time, more difficult to accept.” said an unnamed foreign retailers who use energy efficient T8 lamps two years ago. But this year continuously replace the lighting equipment, but not LED lights, and become T5 led lighting energy efficiency lamps.

The source said, LED lights are far better than the T5 tube light, but the upfront cost of investment let him give up the idea. Another local retail admits, it is not the understanding of the LED, but the indeed pre-occupied money. He claimed, take the normal LED for example, its price is 2-4 times than the energy saving lights. For the retail industry, it is undoubtedly a huge funds.

Two factor: low-quality products lead to a cris of confidence

Of course, in addition to the early pressure of the cost,  due to the current  low barriers of LED to entry, it lead to a large number of workshop-style cottage factory came into being. Inferior products flood the market, so this series of  disorderly competition weakened the trust of this market.

“For example, you go to an electronics market in Chang’an, in a few small store,you can buy the assembly parts, and even assembly instructions.” An LED industry insiders told reporters. Just spent a few dollars, you can buy all the parts to build a so-called led lighting energy efficiency.

According to a rough estimate of insiders, a few hundred people LED factory in Dongguan is about 100, while a dozen people to dozens of people, ranging from LED factory, there are nearly 1000. As LED industry is still no standard, low-quality product severe everywhere, using cheap to  impact the product of normal business of led lighting energy efficiency. At the same time, due to the low performance, it damage the overall reputation of the LED industry.

vehicle led bulbs and led display

The LED display is an important new type of flat panel displays, due to its high brightness, clear picture quality, colorful, make it display in a public multimedia field thriving, a lot of billboards, movie billboards will be designed for LED lights display, vehicle led bulbs, so a huge market space. When we judge a full-color display screen is good or bad, mainly to assess from the following aspects:
vehicle led bulbs and led display
1 Consistency
LED full-color screen, better consistency, the entire screen brightness should be balanced, no obvious color.

2. Dead pixels
Dead pixels is not greater than 0.03% in the indoor LED displays, outdoor LED street light screen, dead pixels should be less than 0.3%, and for the discrete-like.

3, Security
No security risks, leakage current and ground leakage current shall not exceed 3.5mA (AC RMS); anti-point intensity.

4 Appearance
The LED display frame no scratches. Outdoor LED display screen pixel pipe installation should be consistent, no loose shell and tube rupture phenomenon?

5 Structure
LED display part can be steel, aluminum, wood and other materials, the requirements of the rugged and beautiful.

6. Flatness
vehicle led bulbs, Display screen surface flatness to within ± 1mm ​​to ensure that the displayed image is not distorted, locally raised or recessed cause the display viewing angle of dead ends.

7. Brightness and viewing angle
Indoor full color display brightness to 800cd / m² or more, the outdoor full color display brightness 1500 cd / m² or more, in order to ensure the normal work of the display, otherwise it will be because the brightness is too low and can not see the show images.Directly determine the size of the viewing angle display screen audience, and therefore the bigger the better. The size of the viewing angle is mainly determined by the die package.

8 whether the mosaic, dead phenomenon
Mosaic is appears on the display lit or normally black box, that is, modules necrosis, mainly due to the connectors for the display quality, but off. Dead appears on the display lit or normally black single point of vehicle led bulbs, the point of death, how much to determine the die is good or bad.

9 with or without color in LED Products
Color is more obvious color difference between adjacent modules, the color of the transition module, cause the color phenomenon is caused by poor control system, the gray level is not high, low scanning frequency the.