4ft 1200mm 20W T8 LED Tube Lighting
4ft 1200mm 20W T8 LED Tube Lighting Specification:
Power Consumption : 18W 6200k pure white
Fitting : T8
Beam Angle : 180 degrees
Input Power : AC85V – AC265V
Power Factor : ＞95%
Luminous Flux : 1980LM
Color Temperature: 6000-6500K
CE & RoHS certified : Yes
Life Expectancy : 40000-50000 hours
Install guide must read
1. Remove diffuser (if applicable) and fluorescent lamp.
2. Open\Remove Wiring Compartment Cover.
3. Cut off all wires which connected to ballast.
4. Connect one wire from each lampholder together.
5. Connect one wire from the lampholder to branch circuit L (Live
wire) and the other wire at the opposite end to the Branch
Circuit N ( Neutral wire).
6. Close up wiring compartment.
7. Install T8 LED tube.
8. Switch on power.
9. Repeat steps 3 to 5 for each additional bulb\ballast based on
illustration below.
Contact Us
· You can click “contact us” to contact me
· Email usually have some problems, so i suggest don’t send me email.
· The time difference’s sake, all messages will reply in 24-36 hours.