E27-VCT6-MZ series globe type LED replacement bulb for traditional medium screw base lamps. Color temperature can be adjusted from 2700K to 6500K. Consumes 7.2 Watts of power using twenty four x 5630SMD LEDs.
6W Variable Color Temperature LED Bulb RF Remote Specification:
| Base | E26/E27 (Medium) | Battery Type | 2 x AAA |
|---|---|---|---|
| Beam Angle | 360 degree | Bulb Type | A19 (Standard) |
| Color | Variable White | Color Temperature | 2700 K/6500 K |
| CRI | 80 CRI | Current Draw | 60mA |
| LED Amount | 24 LEDs | LED Type | 5630 SMD |
| Lens Color | Diffused | Lumen | 560 Lumen |
| Standards And Certifications | CE/FCC/ROHS Compliant | Total Power Consumption | 7.2 Watts |
| Type | Globes | Volts | 85~265 VAC |
Wireless Remote
1. Master On(-)/Off(O)
Acts as a master On(-)/Off(O) control for all zone-linked VCT lights. Also activates the “Master” function, which allows the remote to control VCT lights in all zones. If a zone is currently active, pressing the master On(-) button restores the “Master” function to the remote.
Acts as a master On(-)/Off(O) control for all zone-linked VCT lights. Also activates the “Master” function, which allows the remote to control VCT lights in all zones. If a zone is currently active, pressing the master On(-) button restores the “Master” function to the remote.
2. Light Temperature Controls – Left(Warm)/Right(Cool)
Increases(left button) or decreases(right button) the light temperature level between warmer (yellow) and cooler (white) light.
Increases(left button) or decreases(right button) the light temperature level between warmer (yellow) and cooler (white) light.
3. Brightness Controls – Top(Increase)/Bottom(Decrease)
Increases(top button) or decreases(bottom button) the brightness level.
Increases(top button) or decreases(bottom button) the brightness level.
4. Selection LED Indicator
Flashes once to indicate when a command has been selected.
Flashes once to indicate when a command has been selected.
5. Zone On(|)/Off(O) – Zones 1-4
Allows up to four “zones” (i.e. channels) of VCT lights to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked.
Allows up to four “zones” (i.e. channels) of VCT lights to be separately linked and controlled by the remote. Pressing one of the Zone On(|) buttons activates that zone; commands will affect only lights in that zone. Once linked to a zone, lights remain linked until they are unlinked.
Set-Up Instructions
1. Install 2 AAA batteries (not included) in the wireless remote.
2. With power turned off, screw the VCT bulb into a socket.
3. Turn power on and wait until VCT bulb illuminates . If bulb does not illuminate, check socket and power connections.
4. The VCT bulb is ready for linking to the wireless remote.