LED lamps have extensive development in the field of automotive lighting

Currently, applications of LED lighting in the automotive sector have extended from the interior lighting to the outside. The application of full color in the automotive interior lighting is already very mature, for example dashboard backlighting switches, car reading lamp or head-up display system and so on. Insiders said that, in addition to the current common applications of taillights, high-mount stop lights, turn lights and reversing lights will also adopt LED in large-scale in the future. According to the report issued by relevant department in 2013, it is estimated that about 95 % of new cars worldwide will using one or more LED taillights.

LED lamps have extensive development in the field of automotive lighting

In addition, the automotive LED decorative lightings are very hot at home and abroad, which is a new type of car decoration products and combines safety, practicality and decorative in a whole. Because LED chassis lamps have good ability of water resistance and impact resistance, it usually requires neither maintenance nor scrubbing. But the power is equivalent to the headlight of a car. It does not bring excessive burden to the car battery and engine in use. The product is installed at the bottom of the car (or car interior). At night or in foggy day, rainy day or road with poor visibility, it can provide a good driving or parking location identifier of your car for pedestrians or other vehicles to reduce accidents. When the LED lights turn on at night, at the bottom of the car (or car interior), it presented red, blue, green and other multiple colors, which very beautiful and greatly adored by young car family of all ages.

With energy-saving, environmental protection, long lifespan, anti-vibration, small in size and quick in response, the process of automotive LED lamps is gradually opened up. On the technical front, LED auto lamp lighting has higher requirements than normal lighting, which must meet the needs of high light output and maintain the junction temperature ≤ 120 ℃. In such case, LED lamps used in automotive lighting systems will have higher cost and it will have a large difference in price with the traditional lighting, such as a high-end car, the price of the incandescent lamps combination is 120 yuan / sets, but LED combination lamps will be 210 yuan / sets. High cost restricts the commercialization of LED auto lamps. Facing of the enormous potential of LED in the automotive lighting area, I believe that reducing the cost led lighting under the premise of protecting the quality of the product will be focus point of LED auto lamps in the future development.

90W PAR38 Dimmable LED Flood Light Bulb

90W PAR38 Dimmable LED Flood Light Bulb

90W PAR38 Dimmable LED Flood Light Bulb

LED energy saving 18-Watt PAR38 indoor flood light is ideal for residential use in kitchens, living rooms and dining rooms and commercial use in offices and retails spaces. It provides a soft, white light and is perfect for general room and accent lighting. Fully dimmable and energy star A certified, this medium base flood light replaces your current 90-Watt halogen PAR38.

90W PAR38 Dimmable LED Flood Light Bulb Specification:

Actual Color Temperature (K) 2700 Assembled Depth (in.) 5.20 in
Assembled Height (in.) 5.70 in Assembled Width (in.) 5.20 in
Average Life (hours) 25000 Bulb Diameter (In.) 4.75
Bulb Type Flood and Spot Color Rendering Index 80
ENERGY STAR Certified Yes Indoor/Outdoor Indoor
Light Bulb Base Code Medium Light Bulb Base Type Medium
Light Bulb Features Dimmable Light Bulb Shape Code PAR38
Light Color Soft White Light Output (lumens) 900
Manufacturer Warranty Yes, 6 years. See “More Information” tab for details Number in Package 1
Returnable 90-Day Specialty Bulb Type Flood & Spot
Watt Equivalence 90 Wattage (watts) 18

90W PAR38 Dimmable LED Flood Light Bulb features:

  • Brightness: 900 lumens
  • Estimated yearly energy cost: $2.17 (Based on 3 hrs/day, 11/kWh. Costs depend on rates and use)
  • Life: 22.8 years (based on 3 hrs/day)
  • Light Appearance: 2700k (soft white)
  • Energy Used: 18 Watts (equivalent to a 90 Watt standard halogen light bulb)
  • Lumens per Watt: 50
  • Uses 80% less energy compared to a standard incandescent light bulb
  • Ideal for residential use in kitchens, living rooms and dining rooms and commercial use in offices and retails spaces
  • Contains Mercury: No

 

 

9.5-Watt (65W) Soft White Dimmable LED Downlight

9.5-Watt (65W) Soft White Dimmable LED Downlight

9.5-Watt (65W) Soft White Dimmable LED Downlight

9.5-Watt (65W) LED Down light (E)* produces 625 lumens with 9.5 watts of power and can last for up to 35,000 hours.

9.5-Watt (65W) Soft White Dimmable LED Downlight Specification:

Actual Color Temperature (K) 2700 Assembled Depth (in.) 7.5 in
Assembled Height (in.) 7 in Assembled Width (in.) 7.5 in
Average Life (hours) 35000 Bulb Diameter (In.) 7.5
Bulb Type Flood and Spot Color Rendering Index 90
ENERGY STAR Certified Yes Indoor/Outdoor Indoor/Outdoor
Light Bulb Base Code Medium Light Bulb Features Dimmable
Light Color Soft White Light Output (lumens) 625
Manufacturer Warranty 3 year limited warranty Number in Package 1
Returnable 90-Day Shatter Resistant No
Specialty Bulb Type Flood & Spot Watt Equivalence 65
Wattage (watts) 9.5

9.5-Watt (65W) Soft White Dimmable LED Downlight details:

  • Brightness: 625 Lumens
  • Estimated Yearly Energy Cost: $1.14 (Based on 3 hrs/day, $0.11/kWh. Costs depend on rates and use.)
  • Life: 32.0 years (Based on 3 hrs/day)
  • Light Appearance: 2700K (soft white)
  • Energy Used: 9.5 watts (equivalent to a 65 watt standard incandescent light bulb)
  • Lumens per Watt: 61
  • Contains Mercury: No
  • Uses 85% less energy compared to a standard incandescent light bulb
  • Recessed ceiling light and suitable for use in dry, damp or wet locations
  • Integrated LED light source and trim, for 6in recessed housings
  • Dimmable: Yes
  • Powered by CREE TrueWhite Technology, for superior color quality and efficacy
  • Meets Federal minimum efficiency standards for Energy Star rating

Cree 60W Equivalent Soft White Dimmable LED bulb light

Cree 60W Equivalent Soft White Dimmable LED bulb light

Cree 60W Equivalent Soft White Dimmable LED bulb light

Cree LED bulbs look and light like the incandescent bulbs you love, and are affordably priced. Backed by our 10-year warranty, Cree LED bulbs shine brightly while using at least 84% less energy and are designed to deliver up to 25,000 hours of light for your home.

Cree 60W Equivalent Soft White Dimmable LED bulb light Specification:

Actual Color Temperature (K) 2700 Assembled Depth (in.) 2.4 in
Assembled Height (in.) 4.0 in Assembled Width (in.) 2.4 in
Average Life (hours) 25000 Bulb Diameter (In.) 2.4
Bulb Type Household Color Rendering Index 80
ENERGY STAR Certified Yes Indoor/Outdoor Indoor/Outdoor
Light Bulb Base Code Medium Light Bulb Base Type Medium
Light Bulb Features Dimmable,Shatter Resistant Light Bulb Shape Code A19
Light Color Soft White Light Output (lumens) 800
Manufacturer Warranty Limited 10-Year Warranty Number in Package 1
Returnable 90-Day Specialty Bulb Type Household / General Purpose
Watt Equivalence 60 Wattage (watts) 9.5

Cree 60W Equivalent Soft White Dimmable LED bulb light Features:

  • Brightness: 800 Lumens
  • Estimated yearly energy cost: $1.14 (based on 3 hours per day, 11 cents kWh. costs depend on rates and use)
  • Life: 22.8 years (based on 3 hours per day)
  • Light appearance: 2700K (soft white)
  • Energy used: 9.5 Watts (equivalent to a 60 watt standard incandescent light bulb)
  • Lumens per Watt: 84
  • Uses 84% less energy compared to a standard incandescent light bulb
  • Cree LED bulbs are the energy-saving replacement for traditional 60 and 40 Watt bulbs that will pay for themselves quickly and pay you every year after
  • Lights instantly, omni-directional
  • Contains mercury: no
  • A19 bulb shape with medium base
  • Dimmable: yes
  • Indoor/Outdoor Enclosed use (damp rated)
  • Meets Federal minimum efficiency standards for Energy Star rating

50W-180W UL Listed LED High Bay Lights

50W-180W UL Listed LED High Bay Lights

50W-180W UL Listed LED High Bay Lights

50W-180W UL Listed LED High Bay Lights  Specification:

Power: 50W-180W
Voltage: 100-240VAC
Power Factor: >0.97
Color: 2800-3300K / 4000-4500K / 5500-6000K
Operating temperature: -25 to + 45°C
Material: Aluminium Alloy Extruded Shape
Light Degradation: < 5% in 20,000 hours
Warranty: 3 years

Installation Manuel:

1. Install reflector on the heat sink, wrest fixed screws very tightly
2. Wrest hanger into top cap, wrest lock screw very tightly
3. Hang the lamp on the installation site,and screw down the non skid lock.
4. Hang chaining of steel wire on another installation device.
5. Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

50W-180W UL Listed LED High Bay Lights

Advantage of high-voltage LED lighting applications

LED lighting products are divided into high-voltage and low-voltage LED LED, due to their different strengths, depending on the application environment and therefore need to choose a different LED lamps. High voltage LED lighting applications What are the advantages :

( 1 ) high light efficiency. It was a small series of multi-core chips made ??by actual test light efficiency with ordinary light sources with higher wattage 5-10 %.

Advantage of high-voltage LED lighting applications

( 2 ) low power requirements . Prices and the high failure rate of the power supply is the most important issue in recent years has been hindered development of the industry , and high-voltage LED it, has inherent advantages , through a small number of sources with a linear constant current driver can achieve the perfect LED efficient and safe stability.

( 3 ) linear power combined with cost savings . Speaking of which some may say that the low efficiency of linear constant current power supply , in fact, depends on how you go with , appeared on the market a lot of linear constant current driver IC performance are pretty good since the past two years, I have tested a linear constant current IC called RY8201 its efficiency up to 0.9. Due to the small volume of linear constant current IC , peripheral components and less power-driven absolute advantage can be part of making directly above the PCB , thus eliminating the need for warehouse space and mounted power supply equipment ( also on the absolute power to do ) , and other related links, so that highlights the advantages of cost control , warehousing, production , delivery and other costs.

Superiority ( 4 ) light source section. Since the light source is a conventional low VF value only after the passage of more than N string and used welding high labor costs and poor welding product after another, thus affecting the production capacity and bring a lot of secondary costs.

( 5 ) the light fades . As traditional light strings N by N and the way made ??known, inconsistent VF light and together, will result in the load on each power source is different , resulting in premature aging or dead parts of the light source lamp , resulting in the whole lamp light fades acceleration. The high-pressure lamp beads multi-string approach is adopted , easy to solve these problems.

175-264V TC-DD 12.5W LED Lamp

175-264V TC-DD 12.5W LED Lamp

175-264V TC-DD 12.5W LED Lamp

Direct replacement for 16W, 28W & 38W TC-DD compact fluorescent lamps in bulkhead fittings etc.. Remove the fluorescent starter switch and replace the fluorescent lamp. For maximum energy saving

175-264V TC-DD 12.5W LED Lamp Specification:

  • Lamp Type:TC-DD
  • Lamp Base:GR10q-4 (4-pin)
  • Input Voltage (Min):174 V
  • Input Voltage (Max):264 V
  • Input Voltage Type:AC
  • Dimmable:No
  • Lifespan:50000 hrs
  • No. of LEDs:208
  • Overall Length:195 mm
  • Overall Width:195 mm
  • Overall Height:33 mm
  • Guarantee:1 Year

175-264V TC-DD 12.5W LED Lamp Features:

  • Direct replacement for 16W, 28W & 38W TC-DD compact fluorescent lamps in bulkhead fittings etc.
  • Remove the fluorescent starter switch and replace the fluorescent lamp. For maximum energy saving bypass the ballast (electronic ballasts must be bypassed)
  • 80 Lumens per Watt output allows compliance with the Building Regulations Approved document L2A/B requiring the use of energy efficient luminaires in buildings other than dwellings
  • Lasts 5 times longer than an equivalent fluorescent lamp (50,000 hrs)
  • Suitable for use in offices, warehouses, car parks, stairwells/corridors etc or difficult access/maintenance applications
  • Instant start without flickering
  • Non-dimmable

TC-DD 14W Non-dimmable LED Lamp

TC-DD 14W Non-dimmable LED Lamp

TC-DD 14W Non-dimmable LED Lamp

TC-DD 14W Non-dimmable LED Lamp Specification:

    • Lamp Type:TC-DD
    • Lamp Base:GR10Q
    • Input Voltage (Min):100 V
    • Input Voltage (Max):260 V
    • Dimmable:No
    • Beam Angle:120 °
    • Lifespan:30000 hrs
    • Overall Length:194 mm
    • Overall Width:194 mm
    • Overall Height:30 mm
    • Guarantee:2 Years

 TC-DD 14W Non-dimmable LED Lamp Features:

  • Direct replacement for 28W TC-DD compact fluorescent lamps in bulkhead fittings etc.M
  • Remote Microwave sensor module may be fixed in the luminaire to detect movement
  • Remove the fluorescent starter switch and replace the fluorescent lamp. For maximum energy saving bypass the ballast (electronic ballasts must be bypassed)
  • 100 Lumens per Watt output allows compliance with the Building Regulations Approved document L2A/B requiring the use of energy efficient luminaires in buildings other than dwellings
  • Suitable for use in offices, warehouses, car parks, stairwells/corridors etc or difficult access/maintenance applications
  • Instant start without flickering
  • Life to 70% Lumen maintenance – 30,000 hours
  • Non-dimmable
  • 2 Year guarantee

 

110-265V T8 20W Clear Rotatable cap LED tube

110-265V T8 20W Clear Rotatable cap LED tube

110-265V T8 20W Clear Rotatable cap LED tube

110-265V T8 20W Clear Rotatable cap LED tube Specification:

  • Lamp Type:T8
  • Lamp Base:G13
  • Input Voltage (Min):100 V
  • Input Voltage (Max):265 V
  • Input Voltage Type:AC/DC
  • Dimmable:No
  • Beam Angle:120 °
  • Lifespan:40000 hrs
  • No. of LEDs:312
  • Overall Diameter:28 mm
  • Overall Length:1200 mm
  • Guarantee:5 Years

110-265V T8 20W Clear Rotatable cap LED tube Features:

  • Rotatable end caps
  • 3 Rows of SMD LEDs
  • Aluminium back for heatsinking of LEDs
  • Impact resistant clear or frosted polycarbonate diffuser
  • High power factor >0.90
  • Suitable for use at -20° to +40°C
  • 1kV surge protection
  • Beam 120°
  • Non-dimmable
  • Voltage range 110-265V
  • Life to 70% lumen maintenance – 40,000 hours
  • 5 Year guarantee

110-265V T8 30W 1800mm LED tube

110-265V T8 30W 1800mm LED tube

110-265V T8 30W 1800mm LED tube

110-265V T8 30W 1800mm LED tube Specification:

  • Lamp Type:T8
  • Lamp Base:G13
  • Input Voltage (Min):100 V
  • Input Voltage (Max):265 V
  • Input Voltage Type:AC/DC
  • Dimmable:No
  • Beam Angle:120 °
  • Lifespan:40000 hrs
  • No. of LEDs:450
  • Overall Diameter:28 mm
  • Overall Length:1800 mm
  • Guarantee:5 Years

110-265V T8 30W 1800mm LED tube Features:

  • Rotatable end caps
  • 3 Rows of SMD LEDs
  • Aluminium back for heatsinking of LEDs
  • Impact resistant clear or frosted polycarbonate diffuser
  • High power factor >0.90
  • Suitable for use at -20° to +40°C
  • 1kV surge protection
  • Beam 120°
  • Non-dimmable
  • Voltage range 110-265V
  • Life to 70% lumen maintenance – 40,000 hours