PF0.5 MR16 DC12V led spot light
PF0.5 MR16 DC12V led spot light Widely used in commercial and domestic lighting shopping malls,hotel,pub,western restaurant,coffee house,homeinterior decoration,shopwindow display,Interior corridors aisle,staircase,etc.
Local lighting and illumination: artware,jewellery,antique,Artistic calligraphy and painting pictures product’s display.
PF0.5 MR16 DC12V led spot light Specification:
| Type |
MR16 |
| Burning position |
360 ° |
| Dimmable |
No |
| Color temperature |
2700K |
| Heatsink / Housing |
Aluminum |
| Lamp survival factor at 6000h ( min. ) |
0.9 |
| Number of LEDs |
1 |
| LED type |
COB |
| Equivalence with incandescent lamp |
50 W |
| Rated Life |
25000 hrs |
| Optimum temperature |
25 ° C |
| Socket |
MR16 |
| Number of switching cycles before premature lamp failure (min ) |
15000 |
| Starting time ( maximum) |
0.5 s |
| Diameter |
50 mm |
| Height |
50 mm |
| Different dimensions to the standard |
|
| Rated power consumption |
6W |
| Energy Efficiency Class |
A (Scale from A to G , Optimum Value A + +) |
| Lumen maintenance factor at the end of the nominal life ( min. ) |
1 s |
| Operating voltage |
AC220-240V |
| Power factor of the lamp ( Min) |
0.5 |
| Color Consistency |
6 |
| Early failure rate |
2% |
| Weighted energy consumption |
6 kWh/1000h |
| Lumen Maintenance Factor at 6000h |
0.9 |
| Power consumption |
6 W |
| Frequency |
50 Hz |
| Nominal beam angle |
36 ° /45 ° |
| Nominal Nutzlichstrom |
500 Lm |
| Color Rendering Index CRI ( min. ) |
90 |
| Light Colour |
Pure White |
| Recommendation for Disposal |
Recycling on recycling center or collection point |
PF0.5 MR16 DC12V led spot light Feature:
1.High-brightness and light up wider area
2.High lumens output,low heat and the function is more steadier
3.Cost less and the price is cheap
4.Healthy beam, without ultraviolet radiation and infrared, no radicalization
5.Green lighting ,without Mercuty & Plumbum and other relative hazardous substance
6.Eyesight protection , Dcdrive without frequency flash,eye will not be tired easily when light .
7.Energy saving with high efficiency .
Notice for installation:
1.Before installation,cut off power to prevent electric shock,and avoid touching the surface of light while working.
2.The light should be avoid installed in place of heat,hot steam and corrosive gas,so as not to affect their working life.
3.Before installation,make sure that installation position can withstand 10 times the weight of the product.
4.For indoor use only,please pay attention to the waterproofing when using outside.
5.Please install on flat places with no vibration,no rocking and no fire hazard,pay attention to avoid dropping down,colliding and knocking
ENELTEC remind you:If you want to know more about other products, please contact us.
