led light manufacturer with solar panel

2007 to the end of 2008, the prices have been at a high level, the 2009 economic crisis, the rapid decline in polysilicon price, most companies have suffered a serious economic crisis, until the third quarter of 2009, before the recovery. After the first quarter of 2011, demand in Germany and Italy to allow led street lights prices to remain strong, gave birth to more serious overcapacity, so far, the photovoltaic industry is still in the doldrums.

led light manufacturer with solar panel

The next wave of growth is to wait for the opening of new markets in China, the United States and Japan, as well as vendors become more health capacity. Germany and Italy in the European market led light manufacturer demand gradually weakened, PV installed capacity in 2012 and 2013 is expected to reach 30.21GW and 35.76GW annual growth rate of 1.40% and 18.40%, respectively, as shown in Figure 1 for the different countries and The region’s installed capacity forecasts.

Global PV installed capacity in 2011, an increase of 50%, which triggered a construction boom, the current production capacity has reached 50GW, far more than the new installed capacity of 2013. With the capacity to further concentration and the phase-out of inefficient production capacity, excess supply situation is expected to improve, as shown in Figure 2.

The average price of the whole industry chain has been on the decline, but the current prices are close to cost price decline will slow in 2013, as shown in Figure 3. Expected next year polysilicon, wafer, cell and module prices were 18 $ / kg, 0.22 $ / w, 0.35 $ / w and 0.60 $ / w, an average annual decline of 18.2%, 15.4%, 4.9% and 14.3% .

The potential of distributed photovoltaic power generation in China

Chinese startup subsidies distributed photovoltaic power generation, and network of distributed PV power generation electricity subsidies 0.4-0.6 financial subsidies are expected to promote the rapid growth of distributed PV. In fact, the roof of distributed photovoltaic power generation system is the mainstream of the international market, a market share of over 70% led light manufacturer, but the high-power power plant is still more popular in China.

China has a huge potential in the roof of resources, the existing building area available for the estimated 61.4 billion square meters, if 5% of the roof-mounted photovoltaic power generation system led light manufacturer, produce 400GW the power. Taking into account the 2013 Golden Sun two 1GW and distributed generation the 5GW scheduling, to reach expected BMPV 6GW.

30w led and electronic heat hink design

The sealed chassis of a typical use in harsh environmental conditions of the design practice, described the structure of the thermal design of the design ideas and specific heat structure, while the application of state-of-the-art thermal analysis software structure of thermal design verification and optimization.

30w led and electronic heat hink design

    Thermal design occupies an important position in the radio structure design, practice shows that the 30w led failure rate of electronic components with the device temperature is increased exponentially relationship and increase the performance of electronic equipment lines and is inversely proportional to the temperature change more demanding environmental conditions under thermal design required careful analysis and calculation here Monopolizing sealed chassis design with their peers, in respect of a project.
30w led  Electronic equipment cooling method the total heat loss depends on the device and its concentration device (or device) allow the ambient temperature of the temperature and device (or devices) to select the appropriate cooling methods depending on the specific circumstances of a device environment is more demanding applications, case saddled portable, field work unattended equipment requirements miniaturization, light weight, water-resistant, anti-high-low-temperature, heat-resistant, high strength. following a device technical indicators excerpt:
Operating Temperature: -25 ℃ ~ +55 ℃
Vibration: Sine 55 ~~ 5Hz acceleration amplitude 1.5g
Chatter: 15g
Humidity: 95 ± 3% (ambient temperature: 30 ℃ ± 2 ℃)
Weight <25kg
Analysis above indicators, the humidity over large field equipment for long-term work environment, which determines the chassis fully sealed chassis. Fever devices such as power supply, CPU box, therefore the thermal design of the chassis to become the device can work The key in the design process of argumentation first denied the chassis fan installed outside the program, although more rapidly away chassis surface heat forced air cooling but installed fan is bound to increase the power output power, increase the heat consumption, but also the main reason is high heat, high humidity environment can not guarantee that the fan is working properly. thus the thermal design of the chassis can be set to conduction cooling.
From start to determine the various design aspects:
· PCB optimal design in the completed function under the premise of the rational layout of components, heat evenly shed conducive to consumption and cooling measures conducive to take the structure.
· Thermal conduction plate design of one end and the heating device into close contact, and the other end is brought into close contact with the chassis wall. Two heat conduction of 30w led lights: the heat generating element → thermal conduction plate → tank wall.
The thermal design of the chassis shell.
1 PCB board design
Optimal design for PCB circuit design in accordance with the first principle, first select the better high temperature performance, industrial-grade devices take cooling measures to facilitate the structure, the key lies in the component layout neatly arranged in rows. Centre emplaced heat loss device dual in-line devices, peripheral devices emplaced relatively large heat loss. use more. well it is the overall thermal design and lay a good foundation.
2 thermally conductive plate design
Thermally conductive plate to select a large copper plate of the heat transfer coefficient. General chip pin at fever neatly dual in-line devices, device pins through the thermally conductive plate device underside closely with insulation film the thermal conductivity of the plate surface

led solution and heat sink

Analysis of the reasons for the rise of led lighting lighting source temperature.

Limiting factors currently limit the development of led lighting in addition to the cost, is the heat. The LED is a semiconductor light emitting device, with the change of its own temperature. Its characteristics change dramatically. Led the higher the temperature, the light source the sooner the light fades, the shorter the life. Led normal use standard terms of light decline to 70%, when the junction temperature of 65 ° C, led life more up to 90,000 hours to 100,000 hours; the junction temperature rose to 75 ° C, life expectancy dropped to 50,000 hours life of 20,000 hours; junction temperature of 95 ° C, the light source life; When the junction temperature of 105 ° C, more than ten thousand hours led solution. In view of this, the key to extend the led light source life is to reduce junction temperature to accelerate the cooling effect of the led lighting.

led solution and heat sink

led in the power drive. Not only produce light energy, but also generate a lot of heat. For the LED chip is smaller, its own thermal capacity is also small, the heat generated can not be conduction out in a timely manner, and therefore will produce a high junction temperature. LED illumination light source, in addition to as the visible light energy consumed, the other energy are converted into heat, about 70% of the electrical energy into heat energy. Further, since the the led package small area, less cooling by convection and radiation, and also to make the led light led solution source to the accumulation of a large amount of heat, so that the rise of the temperature of the LED lights source.

led lighting on the hazards of heat bad
Electronic components deformation
led lamps by a number of electronic components. The coefficient of thermal expansion of each component of the material is not the same. When the temperature rises, the expansion ratio of the combined elements is not the same, can lead to the material bending deformation occurs even at the connection, because the stress is too large cracks.

Electronic components blown
LED semiconductor element as a heat source when the temperature l, its impedance becomes small, increase in current, thermal energy increases, the temperature rises, so the cycle of the vicious cycle, prone electronic components blown circuit fault.

Accelerated aging encapsulation material
LED chip packaging use of the epoxy resin, is easily oxidized when the temperature rises, aging and embrittlement, such that its light transmittance decreased, thereby causing led out of the light quantity decrease. The higher the temperature, this phenomenon becomes. After repeated at high temperatures led solution. Material multiple expansion and shrink, will reduce the strength of the material, thereby undermining the performance of the material failure affect their life.

high power led driver and explosion proof lights

China’s semiconductor lighting industry is entering an important period of independent innovation, to achieve leapfrog development, LED industry in recent years, the rapid development of high-brightness LED chip high power led driver production this year is expected to be over 12 billion, a growth rate of 100%. According to reports, China has become the world’s largest producer and exporter of lighting appliances country. Global semiconductor lighting market sales of more than seven billion U.S. dollars, an average annual growth rate of over 20%, is expected will form a potential market of 500 billion to $ 100 billion in the next five to 10 years.

high power led driver and explosion proof lights

LED as a light-emitting light source of the explosion-proof lamps have a long life, energy saving, safety, environmental protection and other significant advantages, its power consumption is only 1/10 of the ordinary industrial explosion-proof lighting, small size, light weight, low energy consumption, instant start, can withstand high strength mechanical shock and vibration, and other obvious advantages, but due to various reasons such as LED costs is also promoting its application. However, all people in the industry are quite optimistic about the future of the industrial use of LED explosion-proof lighting high power led driver , that will set off a new LED light source alternative movement.

With the domestic LED lighting manufacturing industry in 2011 to an oversupply serious oversupply in 2012 and the emergence of a large number of companies to limit production, discontinued, closed, closed down, even my boss Paolu phenomenon, many LED explosion proof lighting manufacturers have sights broader specialty industrial explosion-proof lighting market in Europe and the United States. Of course, there is a great attraction for the huge European market demand for LED explosion proof lighting manufacturer, but not so easy to enter the European and American markets, in addition to the well-known LED patent threshold, ATEX explosion-proof certification is interested in the European and American markets, manufacturers must the face of another technical barriers to trade. According to the reporter, the official authorized by the EU in the domestic qualification awarded ATEX certification EU the authorized announcement institutions (NB1254) a company called Swiss QS certification, they have accepted a number of well-known domestic LED lighting high power led driver enterprise application ATEX categorysome products have passed the rigorous testing of explosion-proof lab, is about to get a the ATEX certification awarded by the Swiss QS certification company, to make the product the first step into the European explosion-proof lighting market.

High Power 10W RGB LED Flood Light Fixture with Remote Part Number: FL-RGB120-10W

High Power 10W RGB LED Flood Light Fixture with Remote Part Number: FL-RGB120-10W

High Power 10W RGB LED Flood Light Fixture with Remote Part Number: FL-RGB120-10W

53″) x 9cm(3.5cm(3.35″)
. Mounting bracket included. Black painted aluminum housing with clear glass lens. Reliable thermal design: Dimensions. Wide flood 120 degree beam pattern.10W RGB Flood Light Fixture uses high power COB LED to produce 250 lumens (static white mode), 11,54″) x 8.5cm(4. Weatherproof IP65 rating. Features 10 static color modes. and power cycle mode retention. 3 dynamic color-changing modes. 12 VDC operation with internal RF controller

 

General Specifications
Beam Pattern 120 degree Color RGB
Finish Black IP Rating Weatherproof IP65
LED Amount 9 LEDs (COB) LED Type COB (chip-on-board)
Lumen 250 Lumen Polarized Yes
Standards And Certifications CE/FCC/ROHS Compliant Total Power Consumption[1] 10 Watts
Type Fixture Volts 12 VDC
Wattage 10 Watts Wire Length 50.8cm(20in)
Dimensions: 11.5cm(4.53″) x 9cm(3.54″) x 8.5cm(3.35″)
All specifications are subject to change without notice
1. Total product power consumption, measured in watts, including drive circuitry and controllers that make up the entire lamp.

, (Offline)Live Chat

Offline

Contact Us

HomeWork & Off-Road LightsHigh Powered Spot/Flood LightsHigh Powered Spot/Flood FixturesHigh Power 10W RGB LED Flood Lights Fixture with Remote

Showing 1-4 of 11See All PhotosClick to Enlarge

High Power 10W RGB LED Flood Light Fixture with Remote

Part Number.95

High Power 10W RGB LED Flood Light Fixture with Remote

$105.!$0!5mm barrel connector. In Stock $59. In Stock Select Wattage.Part Number. St. Accessories.. In Stock (Clearance) WPS-12VDC-xW series regulated 12VDC waterproof power supplies.: (Offline) Chat with Us

Offline

Call toll-free 866-590-3533

E-mail Us:Part Number. UL. BPS-12VDC | UPC. 12VDC-PS | UPC.95

28W High Power LED Beacon Spot/Flood Light Fixture

$139. Accessories.

12VDC Waterproof Power Supply – UL Recognized

3 Watt RGB LED Landscape Spotlight

12VDC CPS series Power Supply

You Recently Viewed

$59.

Customers Also Purchased

Power Cord for Power Supplies

High Power 30W RGB LED Flood Light Fixture w:

Power Supply Selection Guide

More Information: IP67 rated: CPS-12VDC-xW | UPC: 12VDC output. Louis Missouri. ConnectorsDimmersExtension CablesSplitter CablesRemotes/Switches Qty.

6.:

Power Supply Selection Guide

More Information: FL-RGB120-10W | UPC. Accessories.00 ea.95 ea.

Add to

Wish ListQuantity Discount PricingOrder will ship Wednesday (03/20/2013)

Related Links

Application Photos

Specifications

Photos & Videos

Power Supplies

Reviews

Power Supplies

Power Supply Calculator

Installation Supplies

1, ConnectorsDimmersExtension CablesSplitter CablesRemotes/Switches Qty. 12VDC Output. LPV-60-12 | UPC, IP67 rated. | Stock: | Stock: Write a Review Qty:

12VDC Waterproof Power Supply

$19.

Portable 12VDC 8-Cell Battery Power Supply

$2..

12VDC Waterproof Power Supply – UL Recognized

$19: 12VDC output:. Includes 4 foot long AC in and DC out cables with a 5.Part Number. TUV. In Stock Select Battery Type. 84778100392 | Stock.95 to $4.,95 to $179: (Use new alkaline batteries only)

More Information: Completely sealed aluminum housing:.Part Number.

Power Supply Selection Guide

More Information.95 ea:

More Information:.

12VDC Waterproof MEAN WELL Power Supply – UL 1310

$29. 100~240VAC input. All leads stripped and tinned.

30 Watts60 Watts

HMA-xNU-Rx UL recognized waterproof power supplies,

5. Accessories.

6 Watts15 Watts24 Watts50 Watts

CPS-12VDC-xW series compact power supplies, In Stock

90~264VAC Input, DimmersPower Cord Qty:99

High Power 30W RGB LED Flood Light Fixture with Remote

$225: HMA-xNU-Rx | UPC:

4: DimmersPower Cord Qty. WPS-12VDC-60W-DI | UPC.. | Stock.

8 x AA8 x D

Battery Powered 12VDC Portable Compact Power Supply (CPS) can power most of our 12VDC products: 85-264VAC input: completely sealed aluminum housing.5mm output connector.Part Number.95 ea.95

36W High Power LED Beacon Spot/Flood Light Fixture

$189, In Stock (Various Clearance Options Available) Select Wattage,00

Sign In Site Index

Info / Policies

Search All

Products By

Category

 

 

 

 

 

 

 

Universal

LED Bulb FinderVehicle

Bulb Finder 8.95 to $24,.95

18W High Power LED Beacon Spot/Flood Light Fixture

Chat with us Online:

12VDC Enclosed Power Supply

$34: Accessories: DimmersPower Cord Qty:Part Number.95 ea. 84778102928 | Stock. DimmersMountingPower Cord Qty.

12VDC CPS series Power Supply

$10:30 AM to 4: | Stock. 12VDC output. Slim plastic case with IP67 rating.. All leads stripped and tinned.. In Stock (Clearance) Select Wattage, 84778102772 | Stock. 120VAC input: All input and output wires have stripped tinned leads: and CE certified:95 to $34: UL 1310 compliant for LED lighting and sign applications.95 ea. Uses 8 x AA or 8 x D batteries and has 5. Run time will vary based on power draw and battery capacity.00 PM CDT

866-590-3533

Chat with us Online: Accessories. USA

. Send an Email

? 2002-2013 Super Bright LEDs Inc:

3:

42 Watts100 Watts200 Watts240 Watts320 Watts450 Watts600 Watts

PS-12VDC-xW series enclosed power supplies: 120VAC input!

2:95 ea: 12VDC output.

Power Supply Selection Guide

More Information

High Power 30W RGB LED Flood Light Fixture with Remote Part Number: FL-RGB120-30W

High Power 30W RGB LED Flood Light Fixture with Remote Part Number: FL-RGB120-30W

High Power 30W RGB LED Flood Light Fixture with Remote Part Number: FL-RGB120-30W

3 dynamic color-changing modes. Weatherproof IP65 rating. Features 10 static color modes. Mounting bracket included.8″) x 18.5cm(7. Dimensions: Wide flood 120 degree beam pattern.30W RGB Flood Light Fixture uses high power COB LED to produce 750 lumens (static white mode).7cm(5,3″) x 12, Reliable thermal design. 22.4cm(8.0″)
. 12 VDC operation with internal RF controller. Black painted aluminum housing with clear glass lens. and power cycle mode retention

 

General Specifications
Beam Pattern 120 degree Color RGB
Finish Black IP Rating Weatherproof IP65
LED Amount 30 LEDs (COB) LED Type COB (chip-on-board)
Lumen 750 Lumen Polarized Yes
Remote Type Multi Device Pairing/Radio Frequency Standards And Certifications CE/FCC/ROHS Compliant
Total Power Consumption[1] 30 Watts Type Fixture
Volts 12 VDC Wattage 30 Watts
Wire Length 96.52cm(38in)
Dimensions: 22.4cm(8.82″) x 18.5cm(7.28″) x 12.7cm(5″)

Louis Missouri,99 ea.00

Sign In Site Index

Info / Policies

Search All

Products By

Category

 

 

 

 

 

 

 

Universal

LED Bulb FinderVehicle

Bulb Finder 8.

36W High Power LED Beacon Spot/Flood Light F! In Stock $105!

Write a Review

Customers Also Purchased

Power Cord for Power Supplies

High Power 10W RGB LED Flood Lights Fixture w. Doing so will help inform other potential buyers and allow us improve our product lines. It may take up to 72 hours for your review to appear.95

High Power 10W RGB LED Flood Light Fixture with Remote

$105. (Offline)Live Chat

Offline

Contact Us

HomeWork & Off-Road LightsHigh Powered Spot/Flood LightsHigh Powered Spot/Flood FixturesHigh Power 30W RGB LED Flood Light Fixture with Remote

Showing 1-4 of 7See All PhotosClick to Enlarge

High Power 30W RGB LED Flood Light Fixture with Remote

Part Number.. FL-RGB120-30W | UPC. Send an Email

? 2002-2013 Super Bright LEDs Inc..95

18W High Power LED Beacon Spot/Flood Light Fixture

Chat with us Online.00 PM CDT

866-590-3533

Chat with us Online..99

High Power 30W RGB LED Flood Light Fixture with Remote

$225. Write a Review Qty.95

36W High Power LED Beacon Spot/Flood Light Fixture

$189:95

28W High Power LED Beacon Spot/Flood Light Fixture

$139. (Offline) Chat with Us

Offline

Call toll-free 866-590-3533

E-mail Us. USA

:$0: St: 84778103016 | Stock!

Add to

Wish ListQuantity Discount PricingOrder will ship Wednesday (03/20/2013)

Related Links

Application Photos

Specifications

Photos & Videos

Reviews

Overall Rating

Total Reviews

0

Rating Breakdown

0% 0% 0% 0% 0%

Tell Us What You Think

Share your own experience and photos of this product:30 AM to 4:.

3 Watt RGB LED Landscape Spotlight

You Recently Viewed

$59

High Power 20W LED Flood Light Fixture Part Number: FL-CW120-20W

High Power 20W LED Flood Light Fixture Part Number: FL-CW120-20W

High Power 20W LED Flood Light Fixture Part Number: FL-CW120-20W

Dimensions. Reliable thermal design and short/over-voltage protection. Attached mounting bracket included. 17. Price for each.78cm(7″) x 12. Available in wide flood 120 degree beam patterns. Weatherproof IP65 rating: Available in low voltage 24 VDC or high voltage 90~264 VAC operation w/ built in UL recognized Meanwell constant current driver.
.20W Flood Light Fixture uses high power Epistar COB/Planar LED to produce 1070 lumens.23cm(8.74cm(5.02″) x 22.75″)

 

General Specifications
Beam Pattern 120 degree Color Cool White
Color Temperature 5400 K CRI 72 CRI
Efficacy 54 lm/w Finish Black
Water Resistance Weatherproof IP65 LED Amount 1 LED
LED Type COB (chip-on-board) Lifetime 35000 Hours
Lumen 1070 Lumen Operating Temperature -20~+45 °C
Polarized Yes Standards And Certifications CE/FCC/ROHS Compliant
Storage Temperature -40~+85 °C Type Fixture
Wire Length 91.5cm(36in)
Dimensions: 17.78cm(7″) x 12.74cm(5.02″) x 22.23cm(8.75″)
All specifications are subject to change without notice

In Stock Select Volts, (Offline)Live Chat

Offline

Contact Us

HomeWork & Off-Road LightsHigh Powered Spot/Flood LightsHigh Powered Spot/Flood FixturesHigh Power 20W LED Flood Light Fixture

Showing 1-4 of 6See All PhotosClick to Enlarge

High Power 20W LED Flood Lights Fixture

Part Number. (Offline) Chat with Us

Offline

Call toll-free 866-590-3533

E-mail Us. | Stock!!.

Add to

Wish ListQuantity Discount PricingOrder will ship Wednesday (03/20/2013)

Related Links

Application Photos

Specifications

Photos & Videos

Reviews

Overall Rating

Total Reviews

0

Rating Breakdown

0% 0% 0% 0% 0%

Tell Us What You Think

Share your own experience and photos of this product..00

Sign In Site Index

Info / Policies

Search All

Products By

Category

 

 

 

 

 

 

 

Universal

LED Bulb FinderVehicle

Bulb Finder 8. It may take up to 72 hours for your review to appear.

LED Beacon Power Cable Extension

18W High Power LED Beacon Spot/Flood Light F.95 ea.

Write a Review

Customers Also Purchased

High Power 30W LED Flood Light Fixture

Power Cord for Power Supplies

CPS-x2ST Standard Barrel Connector to Screw . Send an Email

? 2002-2013 Super Bright LEDs Inc. USA

..95

18W High Power LED Beacon Spot/Flood Light Fixture

Chat with us Online.

24 VDC90~264 VAC

$79. Louis Missouri.95

28W High Power LED Beacon Spot/Flood Light Fixture

$139:99

High Power 30W RGB LED Flood Light Fixture with Remote

$225.95 to $119.30 AM to 4.

You Recently Viewed

$59:95

36W High Power LED Beacon Spot/Flood Light Fixture

$189: Doing so will help inform other potential buyers and allow us improve our product lines: Write a Review Qty:$0! St:95

High Power 10W RGB LED Flood Light Fixture with Remote

$105: FL-CW120-20W | UPC.00 PM CDT

866-590-3533

Chat with us Online

36W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-CW36W

36W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-CW36W

36W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-CW36W

landscaping. billboards, security, display, Reliable thermal design, wall washing, 100~264 VAC operation,
, flagpole, auditoriums,36W High Power Spot/Flood Light Fixture uses 12 world leading high powered CREE XRE LED Flood Lights produce up to 1680 lumens with incredible efficiency, constant current driver and short/over-voltage protection. Powder coated aluminium housing with fully adjustable easy to use mounting bracket, retail. Perfect for many applications including warehouses. street. Weatherproof IP65 rating. and tunnel illumination

General Specifications
Color Cool White Color Temperature 8000 K
Current Draw 400mA Finish Aluminum
Water Resistance Weatherproof IP65 LED Amount 12 LEDs
LED Type Cree XR-E Lifetime 50000 Hours
Lumen 1680 Lumen Operating Temperature -20~+45 °C
Standards And Certifications CE/FCC/ROHS Compliant Storage Temperature -40~+85 °C
Power Consumption 36 Watts Type Fixture
Operating Voltage 100~240 VAC Wire Length 101.6cm(40in)
Dimensions: 10cm(3.94″) x 5.2cm(2.05″) x 20cm(7.87″)
All specifications are subject to change without notice

Write a Review Qty,

100cm(39. In Stock Select Length . Louis Missouri!

WFLB series 96 LED Waterproof Flexible Light! (Offline) Chat with Us

Offline

Call toll-free 866-590-3533

E-mail Us.Part Number. | Stock..00

Sign In Site Index

Info / Policies

Search All

Products By

Category

 

 

 

 

 

 

 

Universal

LED Bulb FinderVehicle

Bulb Finder 8.. In Stock Select Beam Angle..95 – $129.

You Recently Viewed

$105.95 to $19.95

18W High Power LED Beacon Spot/Flood Light Fixture

$89.95

36W High Power LED Beacon Spot/Flood Light Fixture

$189.99

High Power 30W RGB LED Flood Light Fixture with Remote

$225..:

Add to

Wish ListQuantity Discount PricingOrder will ship Wednesday (03/20/2013)

Related Links

Application Photos

Specifications

Photos & Videos

Accessories

Reviews

Extension Cables

Installation Supplies

1. Qty. Send an Email

? 2002-2013 Super Bright LEDs Inc.30 AM to 4.95 ea.3in) or 500cm(197in) lengths and is for low voltage DC cables.$0.3in)500cm(197in)

Waterproof Extension Cable for LED Beacon:

LED Beacon Power Cable Extension

$5:00 PM CDT

866-590-3533

Chat with us Online:

Customers Also Purchased

36W LED Panel Light Fixture – 300mm x 600mm

High Power 30W RGB LED Flood Light Fixture w: Available in 100cm(39.. (Offline)Live Chat

Offline

Contact Us

HomeWork & Off-Road LightsHigh Powered Spot/Flood LightsHigh Powered Spot/Flood Fixtures36W High Power LED Beacon Spot/Flood Light Fixture

Showing 1-4 of 10See All PhotosClick to Enlarge

36W High Power LED Beacon Spot/Flood Light Fixture

Part Number.

LED 6″ Retrofit Luminaire – LED Can Lig.:95 ea.

$225. LBC-Lx | UPC: St::95

28W High Power LED Beacon Spot/Flood Light Fixture

$139: LBx-CW36W | UPC! USA

:95

High Power 30W LED Flood Light Fixture

Chat with us Online: | Stock.

More Information

 

28W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-x28W

28W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-x28W

28W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-x28W

street. display, constant current driver and short/over-voltage protection, Weatherproof IP65 rating, Perfect for many applications including warehouses, Reliable thermal design, billboards, flagpole, Powder coated aluminium housing with fully adjustable easy to use mounting bracket, 12 VDC operation,28W High Power Spot/Flood Light Fixture uses 12 world leading high powered CREE XRE LED Flood Lights to produce up to 1500 lumens with incredible efficiency, wall washing. security,
. retail. auditoriums. landscaping. and tunnel illumination

 

General Specifications
Current Draw 1350mA Finish Aluminum
Water Resistance Weatherproof IP65 LED Amount 12 LEDs
LED Type Cree XR-E Lifetime 50000 Hours
Lumen (Max) 1500 Lumen Operating Temperature -20~+45 °C
Standards And Certifications CE/FCC/ROHS Compliant Storage Temperature -40~+85 °C
Power Consumption 24 Watts Type Fixture
Operating Voltage 12 VDC Wire Length 101.6cm(40in)
Dimensions: 10cm(3.94″) x 5.2cm(2.05″) x 20cm(7.87″)
All specifications are subject to change without notice

DimmersPower Cord Qty, In Stock Select Wattage. LPV-60-12 | UPC. Completely sealed aluminum housing! 12VDC Output!

5. All leads stripped and tinned..95 ea.00 ea.

12VDC Waterproof Power Supply – UL Recognized

$19.

$189.95 ea.

3. Accessories. 120VAC input. and CE certified. Accessories. In Stock

90~264VAC Input: | Stock:

12VDC Waterproof MEAN WELL Power Supply – UL 1310

$29. (Offline) Chat with Us

Offline

Call toll-free 866-590-3533

E-mail Us… TUV,

42 Watts100 Watts200 Watts240 Watts320 Watts450 Watts600 Watts

PS-12VDC-xW series enclosed power supplies..95 ea, 12VDC output. Includes 4 foot long AC in and DC out cables with a 5:5mm barrel connector: WPS-12VDC-60W-DI | UPC:

Customers Also Purchased

LED Beacon Power Cable Extension

Power Cord for Power Supplies

18W High Power LED Beacon Spot/Flood Light F..00

Sign In Site Index

Info / Policies

Search All

Products By

Category

 

 

 

 

 

 

 

Universal

LED Bulb FinderVehicle

Bulb Finder 8.: 85-264VAC input:

Power Supply Selection Guide

More Information.95 to $24. In Stock (Clearance) Select Wattage.5″ Square 27W Super Duty High Powered. 12VDC-PS | UPC.95 to $179.. All leads stripped and tinned,

30 Watts60 Watts

HMA-xNU-Rx UL recognized waterproof power supplies:: 12VDC output: completely sealed aluminum housing. UL. DimmersMountingPower Cord Qty.Part Number: Slim plastic case with IP67 rating:. HMA-xNU-Rx | UPC. LBx-x28W | UPC. Accessories.$0, | Stock. IP67 rated. | Stock,95

High Power 30W LED Flood Light Fixture

Chat with us Online,95

28W High Power LED Beacon Spot/Flood Light Fixture

$139: | Stock:

12VDC Enclosed Power Supply

$34:

4: 84778102772 | Stock.

12VDC CPS series Power Supply

$10.

Power Supply Selection Guide

More Information.Part Number.30 AM to 4:95 ea:

2.

12VDC Waterproof Power Supply

$19. In Stock (Various Clearance Options Available) Select Wattage..95

36W High Power LED Beacon Spot/Flood Light Fixture

$189, Accessories,95 to $34. DimmersPower Cord Qty, In Stock Select Color. ConnectorsDimmersExtension CablesSplitter CablesRemotes/Switches Qty: (Offline)Live Chat

Offline

Contact Us

HomeWork & Off-Road LightsHigh Powered Spot/Flood LightsHigh Powered Spot/Flood Fixtures28W High Power LED Beacon Spot/Flood Light Fixture

Showing 1-4 of 10See All PhotosClick to Enlarge

28W High Power LED Beacon Spot/Flood Light Fixture

Part Number:95

18W High Power LED Beacon Spot/Flood Light Fixture

$89: CPS-12VDC-xW | UPC: 12VDC output..

24 Watts50 Watts

CPS-12VDC-xW series compact power supplies.Part Number. 100~240VAC input:: DimmersPower Cord Qty.

Select Beam Angle.

Add to

Wish ListQuantity Discount PricingOrder will ship Wednesday (03/20/2013)

Related Links

Application Photos

Specifications

Photos & Videos

Accessories

Power Supplies

Reviews

Power Supplies

Power Supply Calculator

Installation Supplies

1. Louis Missouri.

12VDC CPS series Power Supply

4.

You Recently Viewed

$105.

Power Supply Selection Guide

More Information,Part Number.99

High Power 30W RGB LED Flood Light Fixture with Remote

$225:95 – $129: 120VAC input:00 PM CDT

866-590-3533

Chat with us Online:

Power Supply Selection Guide

More Information. 12VDC output. Write a Review Qty. All input and output wires have stripped tinned leads.Part Number:

More Information. USA

. St: UL 1310 compliant for LED lighting and sign applications:: Accessories: IP67 rated: Send an Email

? 2002-2013 Super Bright LEDs Inc! In Stock (Clearance) WPS-12VDC-xW series regulated 12VDC waterproof power supplies:: 84778100392 | Stock.95 ea

 

18W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-x18W

18W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-x18W

18W High Power LED Beacon Spot/Flood Light Fixture Part Number: LBx-x18W

and tunnel illumination. wall washing, Reliable thermal design, flagpole, security, billboards, 12 VDC operation, landscaping,
, street, display, Powder coated aluminium housing with fully adjustable easy to use mounting bracket.Weatherproof IP65 rating, constant current driver and short/over-voltage protection. Perfect for many applications including warehouses. auditoriums. retail.18W High Power Spot/Flood Light Fixture uses 6 world leading high powered CREE XRE LED Flood Lights to produce up to 1050 lumens with incredible efficiency

 

General Specifications
Current Draw 1000mA Finish Aluminum
Water Resistance Weatherproof IP65 LED Amount 6 LEDs
LED Type Cree XR-E Lifetime 50000 Hours
Lumen (Max) 1050 Lumen Operating Temperature -20~+45 °C
Standards And Certifications CE/FCC/ROHS Compliant Storage Temperature -40~+85 °C
Power Consumption 18 Watts Type Fixture
Operating Voltage 12 VDC Wire Length 101.6cm(40in)
Dimensions: 10cm(3.94″) x 5.2cm(2.05″) x 20cm(7.87″)
All specifications are subject to change without notice

| Stock, 84778102772 | Stock.00 PM CDT

866-590-3533

Chat with us Online. LBx-x18W | UPC!!

30 Watts60 Watts

HMA-xNU-Rx UL recognized waterproof power supplies.95 to $179.

42 Watts100 Watts200 Watts240 Watts320 Watts450 Watts600 Watts

PS-12VDC-xW series enclosed power supplies. LPV-60-12 | UPC. In Stock (Various Clearance Options Available) Select Wattage.Part Number. | Stock. In Stock Select Wattage.95 ea.

Customers Also Purchased

LED Beacon Power Cable Extension

Power Cord for Power Supplies

12VDC Waterproof Power Supply – UL Recognized

28W High Power LED Beacon Spot/Flood Light F:

12VDC Waterproof MEAN WELL Power Supply – UL 1310

$29:. Accessories. | Stock.

3 Watt High Power LED Landscape Spotlight

You Recently Viewed

$225. Louis Missouri,. In Stock (Clearance) WPS-12VDC-xW series regulated 12VDC waterproof power supplies. (Offline)Live Chat

Offline

Contact Us

HomeWork & Off-Road LightsHigh Powered Spot/Flood Lights18W High Power LED Beacon Spot/Flood Light Fixture

Showing 1-4 of 14See All PhotosClick to Enlarge

18W High Power LED Beacon Spot/Flood Light Fixture

Part Number,95

18W High Power LED Beacon Spot/Flood Light Fixture

$89.Part Number: UL:

12VDC CPS series Power Supply

$10:.95 to $34.30 AM to 4.

12VDC Waterproof Power Supply – UL Recognized

$19: 120VAC input:. All leads stripped and tinned.00 ea. Accessories.95 – $129.

4.95 ea. DimmersPower Cord Qty,: In Stock Select Color:

$139:

More Information. Includes 4 foot long AC in and DC out cables with a 5. 12VDC output. Slim plastic case with IP67 rating:95

28W High Power LED Beacon Spot/Flood Light Fixture

$139: 12VDC Output.95

6″ Super Duty Off Road LED Light Bar – 24W

Chat with us Online. In Stock

90~264VAC Input.$0.00

Sign In Site Index

Info / Policies

Search All

Products By

Category

 

 

 

 

 

 

 

Universal

LED Bulb FinderVehicle

Bulb Finder 8,.., St, 100~240VAC input: DimmersPower Cord Qty: 84778100392 | Stock:95

High Power 30W LED Flood Light Fixture

$149: Write a Review Qty.95

36W High Power LED Beacon Spot/Flood Light Fixture

$189. Accessories. 12VDC output.95 to $24: Completely sealed aluminum housing: completely sealed aluminum housing. ConnectorsDimmersExtension CablesSplitter CablesRemotes/Switches Qty. 12VDC-PS | UPC.

Select Beam Angle.95 ea,

Power Supply Selection Guide

More Information,95 ea. Send an Email

? 2002-2013 Super Bright LEDs Inc, IP67 rated.

Power Supply Selection Guide

More Information: | Stock:Part Number: CPS-12VDC-xW | UPC: DimmersMountingPower Cord Qty. WPS-12VDC-60W-DI | UPC. 120VAC input. DimmersPower Cord Qty. IP67 rated: Accessories:95 ea. TUV.5mm barrel connector.

12VDC Waterproof Power Supply

$19.

Power Supply Selection Guide

More Information.

Power Supply Selection Guide

More Information. All input and output wires have stripped tinned leads, (Offline) Chat with Us

Offline

Call toll-free 866-590-3533

E-mail Us.:: HMA-xNU-Rx | UPC: Accessories: 12VDC output.Part Number.Part Number.

3.

Add to

Wish ListQuantity Discount PricingOrder will ship Wednesday (03/20/2013)

Related Links

Application Photos

Specifications

Photos & Videos

Accessories

Power Supplies

Reviews

Power Supplies

Power Supply Calculator

Installation Supplies

1:

2.

12VDC Enclosed Power Supply

$34. UL 1310 compliant for LED lighting and sign applications: USA

:

24 Watts50 Watts

CPS-12VDC-xW series compact power supplies: All leads stripped and tinned: In Stock (Clearance) Select Wattage:

5! 85-264VAC input:: 12VDC output. and CE certified