标签：track led lighting

Key technical bottleneck in track led lighting have new breakthrough

Over the past few years, prospect of LED develops fast but the household popularity of the process is very slow. “This is not just a price, production or other issue. In addition to consumer recognition problem, there are a number of technical bottleneck.” According to the China Illuminating Engineering Society director Wang Jinsui introduces, this leads to a commercially available track led lighting beans gall lights, LED down light, LED lamps, compared with traditional lamps, it still has very big difference, fass less well than said.

At present, the domestic market oriented with Trinity form of LED products. One of the three major key elements: source, drive power, heat dissipation. The light source is the part of the core products, chip technology mastered by Europe and the United Stated and Japan. Most domestic enterprises adopt buy the assembling way. Therefore, although the LED illumination threshold is not high, yet if you want to do well, it is necessary to solve two key problems–heat dissipation, driving power supply. In contrast, drive power challenges focused on outdoor lighting environment, while heat dissipation is for home used light to enter a large obstacle. According to industry sources, in Zhongshan Ancient Town, there are many LED assembly business, simply to put the track led lighting source assembly into the traditional lamp.  Heat, light and a two optical design is not just as one wishes. Life span can not obtaion the ideal value also.

LED cooling is not good, which will cause the light, and life span shorten. In the current exhibition, the reporter found that the technical problems have had new breakthrough. From the friends of Shenzhen completely subverb the ordinary LED heat, they first introduce the new fin type LED interior lighting series, modeling include ceiling lamp, cast light lamps. According to its general manager, it can save aluminum 4% or more above. The weight is the 1/3 of the traditional lamps. Through more efficient heat conduction and heat radiation, in order to meet the domestic LED relability and life requirements. According to several hundred watts of power LED heat problem, a new research — micro slot cluster compound phase-change cooling technology, become this year’s show is a prominent spot in this study.

track led lighting for car lights

As we all know LED reading lights (track led lighting) interior lighting almost  don’t produce any heat in the vehicle while driving, so in the future, maybe it would reduce at all possible incidents, thereby reducing the serious security risks. Compared with LED lamp life of up to 50,000 to 100,000 hours, 5-10 years, the general life of the vehicle may need to replace. LED lighting can directly convert electrical energy into light energy, fully able to meet the needs of environmental protection and energy saving.

Ordinary incandescent bulbs start a long time, usually in the 100-300 ms, while the LED  (track led lighting) start-up time is only tens nanoseconds. Even the manual mirrors, inside the structure is not too small, triangular bracket, the upper and lower frames, lenses, rotating body, etc. The back of the lens is a sunken black plastic fixed board, be careful when removing. The first to knock out a cavity on the surface of a small branch of the screwdriver and repeatedly rotating down the drill if the drill is more easy way, a good amount of LED High bay circle size, select the appropriate drill bit, dug holes.

track led lighting for car lights

Rearview mirror combination, in accordance with the demolition program will be loaded carriage return. Rearview mirror prone to wind noise at high speed, so you can cut a thin piece of soft rubber, folder lock back into the plane, you can reduce the noise generated. If we use the meter or circuit diagram, the positively charged side of the direction of the lamp to find out, while the negatively charged side of the LED  (track led lighting) is fixed in the nearest body screws.  Direction of light positively charged side LED positively charged side of the wire welding is fixed and you’re done, put the heat shrink tube. Cf before and after the modification of the direction of light, will connect the LED lights and indicators, so after playing the direction of light, will follow the light of the LED lights on the rear view mirror!

In a word, track led lighting for car lights are the future selections for LED lighting use.