1, after you purchased LED lamps, you should not install at first, you should carefully read the luminaries mark and read installation manual, then instructions for the installation, and use lamps, otherwise they may be dangerous.
2, the problem promptly replaced
The light source parameter flag provides timely replacement of aging of the lamp. If you found the tube ends redness, lamp black, or a shadow, the lamp is not lit, the lamp should be replaced to prevent ballast burnout insecurity.
3, do not change the structure of the lamp
Cleaning and maintenance should pay more attention. Not to change the structure of the lamp, and do not easily replace the lamp unit, after the end of the cleaning and maintenance, the lamp should be installed as well, not to leave, in order to prevent to install the wrong equipment lighting components.
4, do not frequent switching
Try not to switch the lamp frequently, because the lamps in frequent start the moment, the current through the filament is greater than the normal work of the current, making the filament temperature rise sharply accelerated sublimation, which will greatly reduce its life, so to minimize the lamp switch.
5, the correct maintenance
LED lamps in use should strengthen maintenance in order to prolong its life. Room lamp should always use a dry cloth, and pay attention to prevent moisture intrusion, so as not to appear a long time corrosion damage or leakage circuit phenomenon; If it installed in the toilet, the bathroom lights shall be fitted with damp shade, otherwise it will greatly shorten the life; If the lights should be installed in the kitchen, so you should special attention to anti-smoke, because the accumulation of grease will affect the brightness of light; light transmittance of the shade is good, but easy to stick dust, so you should wipe to be diligent, in order to avoid affecting the degree of light penetration; If the lamps is non-metallic, the wipe should be with a damp cloth to prevent dust accumulation, affecting lighting effects.
If wet easily lead lamps rust, paint, lighting will shorten the period of use. Therefore, moisture is the key to lighting maintenance, especially the bathroom, bathroom fixtures and kitchen stove lights, lampshades have installed moisture to prevent moisture ingress, corrosion damage or leakage to avoid short circuit.
Home LED lighting should not to use water to clean, just wipe with a dry cloth dipped in water, if you accidentally hit the water, then you need try to dry it, avoid using a wet cloth immediately to wipe.