Wi-Fi Adjustable 6W Dimmable LED Bulb and RF Remote

Wi-Fi Adjustable 6W Dimmable LED Bulb and RF Remote

This A19 LED smart bulb replaces standard E26/E27 medium screw base household lamps in ceiling lights, vanity lights, fan lights, kitchen lights, lamps and more. The WiFi LED globe bulb produces white color that is adjustable from 2700K to 6500K—perfect for those who are unsure about color temperature or for multipurpose rooms where different levels of light are beneficial.

Wi-Fi Adjustable 6W Dimmable LED Bulb and RF Remote Specification:

Beam Angle 360 degree Bulb Type A19 (Standard)
Color Temperature 2700~6500 K Comparable Wattage 55-60 Watts
CRI 80 CRI Current Draw 60mA
Diameter 2.39 in Dimmable Yes
LED Color Variable White LED Quantity 24 LEDs
LED Type 5630 SMD Lens Diffused
Intensity 560 Lumen Remote Control Radio Frequency (RF)
Special Features Custom Colors/Variable Color Temperature Standards And Certifications RoHS Compliant

Linking Lights to Remote Zones

VCT LED light bulbs are controlled exclusively through the multi-zone RF remote. Use the following procedures to establish remote links and send commands.

Linking a Light to the Remote

1. Switch off the main power supply to the light.

2. Restore power and within 3 seconds, choosing one of the “Zone On” (-) buttons, keep the button depressed until the light begins flashing. It will flash white 2 times, indicating that the light is now linked to that numbered zone control and can be controlled via the wireless remote.

Activating a Zone

To activate a specific zone, depress the “Zone On” (-) button. The zone is now active and remote commands will only affect lights linked to that zone.

Unlinking Light to the Remote

1. Determine which zone the light is linked to. This is easily done by testing the Zone On/Off controls for each numbered zone on the remote.

2. Switch off the main power supply to the light.

3. Restore power and within 3 seconds, choosing one of the “Zone On” (-) buttons, until the light flashes 10 times, indicating that the light has been unlinked.

An unlimited number of VCT lights can be linked to a zone. All the lights linked to that zone will display the commands entered on the wireless remote. Conversely, a single VCT light can be linked to multiple remotes. When VCT light is unlinked, it will be unlinked to all remotes.

NOTE: The wireless remote operates using radio frequency. The remote controller’s use is not restricted by normal obstructions such as walls, doors, etc. Once programmed they can be installed anywhere in range of the remote (up to 65 ft. or 20m).