Analysis of urban street lighting management and maintenance
With the increasing investment in public infrastructure and the nationwide glory project, the number of urban street lights has increased in both quantity and type, bringing unprecedented challenges to urban street lighting management.
Urban street lamp construction is an important part of urban infrastructure construction, but there are still many shortcomings in urban street lighting management. For example, some road sections cannot be adjusted regularly with changes in the four seasons; some sections of street lighting cannot be repaired or replaced in time. Some shortcomings in urban lighting management will inevitably lead to unnecessary waste, especially energy waste. Therefore, streetlight managers should always pay attention to how to meet the actual needs, address the existing deficiencies in a targeted manner, strengthen the synergistic guarantee function of the application mechanism, organization mechanism and management mechanism of new technologies, and insist on improving the efficiency of street lamps and reducing the later stage. Work hard on the burden of operation and maintenance and avoiding waste of resources.
When the funds permit, install GPS positioning system and security anti-theft system for streetlight cables, street light boxes and LED solar cells to reduce the inconvenience caused to people's travel and the loss of state property caused by man-made damage and theft. While saving energy, it can effectively curb theft. Every year, there are accidents such as the theft of street lamps, the loss of street lamp ballasts, and even the theft of street light boxes, causing great property losses. Government departments should consider promoting large-scale energy-saving and environment-friendly lamps on a large scale, which not only can reduce the cost of urban lighting, achieve energy conservation, but also solve the problem of theft.
Focusing on the problem of light pollution, focus on prevention of light pollution caused by pollution of light sources and lighting fixtures. For example, formulate a reasonable maintenance management system, repair fault lights in a timely manner, regularly replace light sources with expired life and reduced luminous flux, and timely maintain power supply lines. Reasonable maintenance of light sources and lighting fixtures, increasing luminous flux, can not only solve the problem of energy waste, but also solve the drawbacks of light damage. By cleaning the lighting fixtures frequently and removing dust and dirt from the surface of the lamps, the average illumination can be greatly improved with a small amount of money, and good lighting effects can be achieved.
At this stage, the “three remote” control device is a relatively advanced street lamp control technology. With the help of such automatic control devices, relevant departments can seriously investigate the lighting needs of each road on the basis of ensuring the normal lighting efficiency. Combine the objective factors such as weather, seasons, and length of day and night, and turn on and off the relevant street lights in time, and adjust the brightness of the street lights in real time.
In addition, the "three remote" control device can give full play to the practical value of street lamps. This kind of control device can control the usage mode, frequency and duration of the two headlights, multi-headlights, double-row lights, and all-nightlights in real time. Especially in the middle of the night, the two headlights and the multi-headlights only retain one headlight illumination through automatic control. Only the single-row lighting is kept, and the "all night light" is turned into a "midnight light".