LED light strip installation precautions

LED light strip installation precautions: LED light strip wiring method

The LED lamp has a general voltage of 12V DC, so it needs to be powered by a switching power supply. The size of the power supply depends on the power of the LED strip and the length of the connection. Monochrome 5050 SMD LED strips are wired to distinguish between positive and negative poles. Generally, we provide a welded power plug that plugs directly into the light supply we provide. If you don't want each LED strip to be used a power supply to control, you can buy a relatively large switching power supply for the total power supply, and then all the LED lights with the input power supply are all connected in parallel, unified by the main switching power supply.

LED light strip installation precautions: controller connection method

The LED marquee belt and the RGB illusion light strip need to use the controller to achieve the changing effect when wiring. Symphony lights are generally a common anode, that is, there is a +12V on the lamp strip, and the other are negative RGB three negative poles. The control distance of each controller is different. Generally speaking, simple control distance is 10 to 15 meters, the remote controller's control distance is 15 to 20 meters, and the longest can be controlled to 30 meters.

LED light strip installation precautions: pay attention to the connection distance of the LED light strip

Generally speaking, the LED light strip has a connection distance of up to 20 meters. If the connection distance is exceeded, the LED light strip is easy to generate heat, and the service life of the LED light strip is affected during use. Therefore, the installation must be installed in accordance with the requirements of the manufacturer, should not let the LED lights with overload operation.