First, read the instructions
Buy back lighting, first do not just install, mark and read the installation manual should carefully look at the household led lights, and then instructions for the installation, the use of led high bay lighting, or they may be dangerous.
Second, the problems with the timely replacement of
The timely replacement of the aging of the lamp light source parameters provided by the flag and found that the tube ends red, household led lights black, or a shadow, the lamp jump does not shine, you should replace the lamp in a timely manner to prevent the emergence of the ballast burned and other unsafe phenomenon.
Third, do not change the structure of the lamp
Cleaning and maintenance should be careful not to change the structure of the household led lights, the lamp should not replace parts after the cleaning and maintenance should be intact fixtures will be installed, not to leave the wrong installed lamps parts.
Fourth, do not frequently switch
Try not to frequent the use of household led lights, switches, because of the current when the lamps in the frequent start the instant the current through the filament is greater than the normal work, making the filament temperature increased sharply accelerate the sublimation, which will greatly reduce its service life, and therefore to minimize the lamp switch.
Fifth, the correct maintenance
Lamps in use, but also to strengthen the maintenance, in order to extend their useful life. Room lamp should always use a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid a long time the phenomenon of corrosion damage or leakage short-circuit; installed in the toilet, the bathroom lights shall be fitted with a moisture-proof shade, otherwise it will greatly shorten the life;