Austria microelectronic sensor driving lighting department director Sajol Ghoshal points out, to promote the continuous development of led lighting product technology is the main factor of LED Lights regulations. At present, the construction of the new power plant has become very expensive, so in the future ten years, governments around the world are looking to significantly reduce energy consumption. In a building, a high percentage of energy consumption come from lighting. Therefore, the new forced regulations will affect lighting system design and installation of applications. The European Union is planning to phase out the inefficient light bulbs and has formulated regulations for commercial lighting.
From the historical perspective, led lighting product is a rough control of the electrical load, with a simple switch manual control can be further refined control. For example, the lighting is a rough control of the electrical load, with a simple switch manual control that can be further refined. For example, the California Assembly Bill 32 regulations require the building to 2018 to reduce energy consumption by half. Other building codes, such as California, the Title 24 proposed more specific requirement. Such as requiring the implementation for daylight through windows and skylights capture to reduce energy consumption, and requiring the building equipped with an automatic lighting control system. Currently, low-cost passive infrared detectors has been rarely used in the room. Through building system to control lighting can greatly reduce energy consumption, and provide users with a highly optimized lighting. In this regard, it is clear that there is still a long way to go LED Panel.
Therefore, to use the advantage of LED power and flexible lighting control will be the main trend in the next generation of lighting systems. The program allows the lighting system to adjust the brightness and color of the led lighting product of environmental changes in order to meet the environmental requirements, such as when there is sufficient daylight in the room or no one in it, the method can automatically reduce energy consumption.
Meanwhile, with the development of LED Tunnel residential and commercial lighting applications, the demand for dimming increases, but the incandescent lamps which used in SCR dimming is still here, so the dimming driver IC architecture design need to face a wider range of dimming compatibility issues.