LED lamps have poor heat dissipation problems

The most important component of an LED lighting fixture is the chip and heat dissipation. A good LED chip can bring better luminous efficiency. The heat dissipation directly affects the stability of the luminaire and the service life of the product. So how to make LED lighting fixtures have better heat dissipation has always been the focus of technical research.

LED lamps have poor heat dissipation problems

Let’s talk about the impact of heat dissipation on the luminaire. The main points are as follows:

1, most direct impact, poor heat dissipation directly lead to the reduced service life of LED lamps

Since LED lamps convert electrical energy into visible light, there is a problem of conversion rate, which cannot convert 100% of electric energy into light energy. According to the law of conservation of energy, excess electric energy is converted into heat energy. If the design of the heat dissipation structure of the LED lamp is unreasonable, this part of the heat energy cannot be quickly eliminated. Therefore, since the LED package is relatively small in volume, a large amount of heat energy will be accumulated in the LED lamp, resulting in a decrease in life.

2, causing the material quality to decline

Usually, electronic equipment is used for a long time, and some materials are easily oxidized. As the temperature of the LED lamps rises, these materials are repeatedly oxidized at a high temperature, the quality is lowered, and the life is shortened. At the same time, due to the switch, the luminaire causes multiple thermal expansion and contraction, which causes the strength of the material to be destroyed.

3, overheating causes electronic device failure

This is a common problem of semiconductor heat sources. When the temperature of the LED rises, the electrical impedance increases, causing the current to increase, and the current increases to cause the heat to rise. This reciprocating cycle, more and more heat, eventually causes the electronic components to overheat and damage, causing electrons malfunction.

4, the lamp material is deformed due to overheating

LED luminaires are made up of multiple parts, different parts of which use different materials. These materials have different thermal expansion and contraction sizes. When the temperature rises, some materials will expand and bend due to overheating. If the spacing between adjacent components is too small, both will be crushed and severely damaged.

The poor heat dissipation of LED lamps will cause so many problems. The problems of these components will lead to the performance degradation of the entire LED lamps and shorten the service life. Therefore, LED heat dissipation technology is an important technical problem. In the future, while improving the LED power conversion rate, the LED heat dissipation structure design should be more effective, so that the LED lighting fixtures can get rid of the heat dissipation troubles.

16 Colors Changing 9W E27 RGB LED Light Bulb

16 Colors Changing 9W E27 RGB LED Light Bulb

16 Colors Changing 9W E27 RGB LED Light Bulb has more than two million colors and 120 levels of brightness; This item can be adjusted by remote control. It is suitable for the showcase, residential, office, hotel lobby, shop, exhibition room, landscaping, etc. OmaiLighting LED light bulbs are certifications of CE and RoHS.

16 Colors Changing 9W E27 RGB LED Light Bulb Specification:

Directional: Yes

16 Colors Changing 9W E27 RGB LED Light Bulb Features:

Wireless Remote Controller specification:

Up: Brightness up/Long press for fast flashing

Down: Brightness down/Long press for slow flashing

Off: Power off

On: Power on

R: Color change to Red

G: Color change to Green

B: Color change to Blue

W: Color change to White

FLASH: Auto-change colors, fast skip

STROBE: Auto-change colors, slow skip

FADE: Auto-change colors, fast shade

SMOOTH: Auto-change colors, slow shade

Other no-letter buttons: For color-mix.

Energy-saving and environmentally friendly led courtyard street lights are popular

In the modern courtyard decoration, the luminaire is an indispensable decoration, on the one hand, decoration, on the other hand, it provides illumination for people. Its shape is generally beautiful, and the ornamental value is very strong, so In the process of installation, we will choose a good quality street lamp manufacturer, so the quality of the lamp has certain guarantee. Because the lamp damage is in the process of replacement, it is more complicated, so it is more important to choose a well led garden lamp manufacturer.

Energy-saving and environmentally friendly led courtyard street lights are popular

Led garden light refers to road lighting below 6 meters, and it is also one of many garden lights. It is a kind of lighting mainly decorated with decoration, of course, in the shape and style of the light, completely out of the style of the entire courtyard, led courtyard streetlights play a greater role in lighting, ensuring that the night of the entire courtyard is relatively bright.

In the courtyard streetlight, the reason why the LED courtyard street lamp is chosen is that it is energy-saving and environmentally friendly. Its main structure is an electroluminescent semiconductor diode, which has low luminous flux loss and long service life. The life of the LED light source is three times that of the radical light source and 30% of the energy-saving street light. Saving electricity is equivalent to saving the investment of electricity costs. It is also because led garden lights have this special advantage, and it is also in line with the requirements of modern society for energy conservation and environmental protection. The courtyard led street lights are also more energy-saving, in the market, it is also a comparison.

Improve people’s quality of life, choose energy-saving and environmental protection in the choice of street lamps, in the use of street lamp configuration, or in lighting performance, led courtyard street lights are able to meet the requirements of street lamp specifications, of course, in the market, many led garden lights, Choosing a good garden lamp manufacturer is also a key factor.

RGB Magic 3W E27 16 Color LED Spot Light Bulb

RGB Magic 3W E27 16 Color LED Spot Light Bulb

RGB Magic 3W E27 16 Color LED Spot Light Bulb with Wireless Remote Control

RGB Magic 3W E27 16 Color LED Spot Light Bulb Specification:

Specifications:
1. Emitter Type: LED
2. Shade Type: PC White Cover
3. Case Material: Aluminum
4. Interface Type: E27
5. Input Voltage: 85-265V
6. Power: 3W
7. Luminous Flux: 240-300LM
8. Color Temperature: 3000k
9. Life Time: 50,000 hours
10. Dimension: (2.6 x 2)” / (6.5 x 5.2)cm (L x W)
11. Color: 16 Colors
12. Weight: 3.24oz / 92g
13. Memory: Yes

RGB Magic 3W E27 16 Color LED Spot Light Bulb Features:

1.New and high quality
2.Very low heat generating, besides saving light power
3.Low consumption, high brightness
4. Energy-saving and environmentally friendly is conducive to recycling
5. It comes with a remote control
6. It has flash, strobe, fade and smooth mode for ultimate party light control
7. This LED bulb can change 16 colors

Solar Lights 71LED 3-in-1 Outdoor Security Wireless Motion Sensor LED Floodlight

Solar Lights 71LED 3-in-1 Outdoor Security Wireless Motion Sensor LED Floodlight

Solar Lights 71LED 3-in-1 Outdoor Security Wireless Motion Sensor LED Floodlight perfect for patios, decks, pathways, stairways, driveways, garden, etc. The outdoor solar powered motion sensor light requires No wiring and No tools! And it will turn on at night, and automatically off in the morning.

Solar Lights 71LED 3-in-1 Outdoor Security Wireless Motion Sensor LED Floodlight Specification:

Solar Panel 5.5V, 4.5W
18650 Li-ion Battery 3.7V,2600mAh*2
Motion Angle 120 Degrees
Motion Distance 3 Meters
Delay Time 12s
Switch OFF/AUTO
Lighting Modes Strong Long Light Mode/Dim Light Sensor Mode/Strong Light Sensor Mode
Light Color Daylight White
Lumen 1800 Lumen
Material Stainless Steel +ABS+ PC
Sensor Range  9.8ft / 180°
Charging Time 6 Hours Under The Sun
Working Time 8-10 Hours

Solar Lights 71LED 3-in-1 Outdoor Security Wireless Motion Sensor LED Floodlight Features:

  • LED solar lights use high efficiency solar panels, absorbing sunlight for about a few hours under the sunlight in daytime and it will light throughout the night
  • This is a great solar powered motion light for those places that dont have an outlet
  • Strong Long Light Mode/Dim Light Sensor Mode/Strong Light Sensor mode.
  • No Traditional plug and worked by the clean power to light your garden, patio, stair, pathway automatically at night
  • The lights have two layers of the tightly-sealed inner loop in order to be waterproof or even weatherproof

A. Medium Light Mode
It will auto turn on dim light when in darkness or at night, and auto turn off when in daytime or bright area.
B. Dim + bright when motion detected
When in dark night, the light will be dim without people coming near, however become bright if people comes, and the bright light will last 12 seconds until it returns to dim light again.
C. Strong Light Sensor Mode
In night, the light will be strong bright when people comes, then 12 seconds later, the light dies automatically.

Development of the global LED lighting manufacturing industry

Before the 19th century, people generally used non-electrical lightings such as candles and kerosene lamps. Since 1879, Edison invented the first incandescent lamp, opening the first revolution in the history of human lighting. By 1960, the first artificially fabricated LED began to enter the field of vision of scientists. Then in 1969, the first red LED, the 1976 green LED, the 1993 blue LED, and the 1999 white LED were introduced. In recent years, with the rapid development of the global energy crisis, with the rapid development of LED lighting technology, semiconductor lighting has launched a global LED lighting boom with its outstanding energy-saving and environmental protection characteristics, setting off a second revolution in the lighting industry. “The global LED lighting industry has experienced more than 50 years of development.

Development of the global LED lighting manufacturing industry

At present, semiconductor lighting will replace traditional lighting as the main trend of lighting development. Governments are also competing to introduce policies and plans to promote the development of semiconductor lighting industry, such as the US National Research Project on Semiconductor Lighting and Solid State Lighting (SSL) Research and Development. The plan, the European “Rainbow Project”, Japan’s “21st Century Lighting” program, and the Korean “Photonics Industry Branch – GaN Semiconductor Luminous Plan” reflect the importance of countries’ LED lighting industry development, industrial economy and environmental energy effects. Some countries even the semiconductor lighting industry will be upgraded to a national strategic level for system deployment, and government departments will promote energy-saving lighting. With the implementation of the “global ban”, coupled with the spread of the price war of LED lighting products, the popularity of LED lighting has been advancing rapidly, and the global penetration rate has also increased rapidly, initially forming the three regions of Asia, Europe, and North America. The LED lighting industry is distributed and competitive.

The European region has relatively strict regulations on environmental protection and energy conservation and has strict energy conservation and emission reduction targets. Since early, it has started to implement relevant laws and regulations on the ban on the use and phasing out of incandescent lamps and has repeatedly introduced subsidy plans for LED lighting. Currently, lighting accounts for 12% of the daily electricity consumption of European households (excluding heating and water heaters). The European government hopes to reduce the proportion of lighting in household electricity consumption to 6% by 2050 by popularizing LEDs and other lighting methods. Therefore, the application and promotion of LED lighting products in European countries is still relatively strong. The popularization rate of LED lighting products is relatively high. The low-power (mainly below 10W) ??LED bulbs and lighting products have been widely sold and used in developed countries such as Europe and America. North America has the world’s most advanced upper and middle reaches technology, with world-class chips and components, the continuous improvement of light efficiency and the trend of price decline, driving the rapid development of LED technology and the rapid growth of application prospects. At the same time, it is obvious from the optimistic economic environment, the favorable “ban” policy, the relatively complete supporting technical support and the huge potential demand. At this time, North America has become a new competition for global LED lighting companies. In Asia, governments are actively promoting the promotion and application of LED lighting products to varying degrees, including in Japan, South Korea, and Taiwan. In 2010, the Japanese government began implementing the policy of redeeming LED products to encourage and support residents to use energy-saving and environmentally-friendly lighting products. At the same time, Japan’s LED lighting technology and the market have been at the forefront of adopting energy-saving practices, and its products have been popularized in the Japanese market. The degree is growing at a high speed. South Korea has set a goal of “becoming the world’s top three LED industry powers”, and its government has vigorously promoted LEDs. The large group has also continued to enter the LED lighting industry and actively tap the LED lighting market. On July 1, 2014, the Ministry of Economic Affairs of Taiwan began to implement the minimum allowable energy consumption benchmark for LED bulbs and fully assisted consumers in implementing the “Energy Saving Action” for lighting energy conservation, making it the first mandatory energy source for LED bulbs in Asia. Efficiency control area. At present, the LED lighting industry in Asia has entered the golden period of development. The changing market environment and the aggressive attitude of various companies have continuously injected new elements into the LED lighting industry and brought more intense competition.

From the specific needs of the global LED lighting market, it is currently concentrated in Japan, China, Europe, and the United States.

Solar Powered Outdoor Garden Wall Pathway LED Light

Solar Powered Outdoor Garden Wall Pathway LED Light

Solar Powered Outdoor Garden Wall Pathway LED Light is your optimal choice among various choices. Adopting high-class ABS, PP and stainless steel materials, this lamp guarantees great structure and durability. Inbuilt with 3pcs LED for soft white light. It can be easily installed under the roof or on the fence in your garden. Powered by solar energy, the lamp is quite clean and eco-friendly. It will automatically light up when evening comes.

Solar Powered Outdoor Garden Wall Pathway LED Light Specification:

Material PP, ABS, Stainless Steel
Color White
Working Time 8~10 Hours on by 4~8 Hours Charge
Clamping Width 1.2cm
Lighting Area 1—3㎡
Automatic Sensor Yes
OFF/ON Switch Yes
Battery 1 x AA 1.2V 600mAh (Included)
LED Beads 3pcs
Light Color White

Solar Powered Outdoor Garden Wall Pathway LED Light Features:

  • This solar power 3 LED fence light is very popular and green, energy-saving
  • It can be installed under the roof or fixed on the fence in your garden
  • Solar panel absorbs sunlight into electrical energy stored in the rechargeable battery
  • When evening comes, the solar fence light will automatically send out light
  • This solar fence light gives you a good view and safety of your garden at night

5W Clip Style Goose Neck Red Blue White LED grow light

5W Clip Style Goose Neck Red Blue White LED grow light

5W Clip Style Goose Neck Red Blue White LED grow light is ideal for use in the greenhouse, landscape lighting, home garden or small pot plant. It uses five 1W LEDs to produce red, blue and white light that stimulates the growth of indoor plants. With a convenient clip design and a flexible gooseneck, it easily clips to anywhere and adjusts to any angle for ease of use. Made with aero grade aluminum casing, it has good heat dissipation and is durable for long-lasting use.

5W Clip Style Goose Neck Red Blue White LED grow light Specification:

Material Aluminum
Light Color Red & Blue & White
LED Quantity 5pcs
Base Type E27
Input Voltage AC 85-265V
Goose Neck Size (0.31 x 15.75)” / (0.8 x 40)cm (Dia. x L)
Power Cord Length 15.75″ / 40cm
Color Silver
Dimensions (2.48 x 2.48 x 3.50)” / (6.3 x 6.3 x 8.9)cm (L x W x H)
Weight 9.88oz / 280g

5W Clip Style Goose Neck Red Blue White LED grow light Features:

  • Ideal for use in the greenhouse, landscape lighting, home garden or small pot plant
  • Five 1W LEDs, with PC optical lens
  • Produce red, blue and white light that stimulates the growth of indoor plants
  • Waveband range: 2 red (620-630nm), 2 blue (450-460nm), 1 white (6500K)
  • Red light is best for blooming and fruits while blue light is good for photosynthesis and helps to induce Chlorophyll and Carotenoid that are necessary for healthy leaves
  • High lighting efficiency, low energy cost
  • Convenient clip design, flexible gooseneck
  • Easily clip to anywhere and adjust to any angle for ease of use
  • Durable aero grade aluminum casing, good heat dissipation
  • Built-in power module, require no ballast

Nichia joins Dutch agricultural company to develop LED horticultural lighting market

On October 29, Nichia Chemical Industry Co., Ltd. announced that it will cooperate with Dutch agricultural solutions provider Qwest land International to conduct research and experiments to further develop the LED horticultural lighting market.

Nichia joins Dutch agricultural company to develop LED horticultural lighting market

Qwest land International is at the forefront of greenhouse development and has accumulated environmental knowledge to control plant growth. Nichia hopes to benefit from this knowledge base by working with it.

In addition, Nichia plans to use its core-competitive phosphor technology to develop a unique spectrum that hopes to provide new sustainable lighting for crop cultivation to improve global nutrition.

2-in-1 Outdoor LED Fan Camping Lamp

2-in-1 Outdoor LED Fan Camping Lamp

2-in-1 Outdoor LED Fan Camping Lamp will keep you cool and comfortable inside or outside of your tent and its 18ocs powerful LED bulbs will illuminate the night. Enjoy some of the comforts of home while you experience the great outdoors. Simply hang the lamp from your tent or shelter, or stand it on its base and take pleasure in hours of light and fan. Most of all, its premium ABS material ensures good quality of this camping lamp!

2-in-1 Outdoor LED Fan Camping Lamp Specification:

Dimensions (7.24 x 6.57 x 6.57)” / (18.4 x 16.7 x 16.7)cm (L x W x H)
Weight 18.42oz / 420g
Color Black
Material ABS
Light Source 18 x LEDs
Power Supply 2 x D cell batteries(Not Included)
Light Color White
Lifespan 100000 hours

2-in-1 Outdoor LED Fan Camping Lamp Features:

  • New and in a good condition
  • Unique design combines fan and lamp in a perfect unit
  • Top-grade ABS material, lightweight and durable
  • Utilize 18pcs LED for high brightness
  • Easy to install, wherever you like
  • Fit for outdoor camping or traveling