月份：2015年11月

India’s Tata Power Company plans to launch LED lighting

TataPower in Mumbai, as one of India’s largest power company, will launch LED lighting program and in cooperation with Osram India Mumbai branch, and other local equipment manufacturers, the development of LED lighting industry.

India's Tata Power Company plans to launch LED lighting

In this plan, consumers will be able to use the equivalent of half the market price to buy five household LED lamp, a total of only 525 rupees (equivalent to about 51.2 yuan). On average, single tube as long as 105 rupees (equivalent to about 10.2 yuan). In LED lamps, such a low price has been with the Indian government for the LED bulb set $ 1 (equivalent to about 6.3 yuan) is very similar to the upper limit of the target.

According to Tata Power Company released a statement, the plan is part of demand management programs (DemandSideManagementinitiative), the intention is to promote and improve the penetration rate of household LED lamps.

20W of LED lamp can replace the 40W traditional lamp, and according to Tata Power’s announcement, users will enjoy an additional three-year warranty.

Smart Energy Saving LED panel light

Smart Energy Saving LED panel light

Many customers are keen to use future-proof technology to project an image of their company as being advanced, and ahead of the crowd. At this moment, LED is ‘hot’, and is widely seen as the leading energy-saving solution. Available in slim recessed and suspended versions, Smart Panel is an affordable LED-based office solution that delivers good-quality, energy-efficient general lighting – and an enhanced working

Smart Energy Saving LED panel light Specification:

Type
  • RC110V
Ceiling type
  • Exposed- and symmetrical concealed T-bar ceiling and plaster (board) ceiling
Ceiling grid
  • Module size in length: 600 mm
Light source
  • Non-replaceable LED module
Power
  • 2500 lm version: 39 W
  • 3400 lm version: 52 W
Beam angle
  • 120º
Luminous flux
  • 2500 or 3400 lm
Correlated Color Temperature
  • 3000 or 4000 K
Maintenance of lumen output – L70
  • 30,000 hours at 25ºC
Operating temperature range
  • -5 to 40ºC
Driver
  • Built-in
Mains voltage
  • 100-240 V / 50-60 Hz
Material
  • Housing:
  • Optic cover; light guide and diffuser: plastic
  • Driver box: plastic
Color
  • White
Optical cover
  • Light guide with diffuser
Connection
  • Push-in connector (PI) or with pull relief (PIP)
Maintenance
  • No internal cleaning required
Installation
  • Individual: lay-in in exposed ceiling grids
  • Individual: suspended mounting with a set of steel-wire suspensions (SMS) with power cord
Additional input
  • Fast fine adjustment with clutch device (Reutlinger)
Accessories
  • Suspension set (RC110Z SMS), to be ordered separately

Smart Energy Saving LED panel light Features:

High system efficacy – 65 lm/W for neutral white
High color rendering and good lighting uniformity
Housing 14 mm in height: 55 mm including the driver
Long lifetime: 25,000 hours minimum
Recessed and suspended versions available

6-inch Recessed LED Downlight Trim

6-inch Recessed LED Downlight Trim

10-Watt (75W Equivalent) 6-inch Recessed LED Downlight Trim, 750 Lumens, Warm/ Soft (3000K) – Dimmable

Get a longer lasting, safe, and affordable alternative to standard incandescent downlights using this 10-watt 6-inch Recessed LED Downlight Trim from Monoprice!

This 120-volt light assembly uses only 10 watts of power, but produces 750 lumens of light energy at 3000K, equivalent to a 75-watt incandescent downlight.

This aluminum, indoor light assembly is 7.3″ in diameter and 2.8″ tall. It uses the Sanan SMD2835 chipset, is rated for up to 50,000 hours of use before failure, and carries a three year replacement warranty. The power factor is greater than 0.95.

It generates light in the 3000K range with a Color Rendering Index greater than 80, which generates the kind of soft and warm feeling that is perfect for most home lighting needs. This light is fully dimmable without risk of damage to the bulb or a reduction in its expected life span.

6-inch Recessed LED Downlight Trim

Cree promote USD8 LED lamp with 27 years lifespan

LED bulbs can be accepted by consumers, because commitment to “life will be longer than ordinary light bulbs 20–25 years of a great relationship.” Although this commitment is very beautiful, but the high price of LED bulbs are also some people unbearable.

Cree promote USD8 LED lamp with 27 years lifespan

Recently, LED upstream chip maker Cree has introduced a life of 27 years (approximately 30,000 hours) and is priced at just $ 8 (about 51 yuan) LED bulbs. This life is only 1,000 hours compared to traditional bulb life almost doubled 30 times. Meanwhile Cree executive said: “Although this bulb look with traditional bulbs and no different, but are greatly improved in terms of energy saving or life on no doubt, it would be better LED bulbs..”

In addition to energy-saving and life has improved greatly beyond, this new LED bulbs also will be optimized display color, color rendering index of up to 83. And have omnidirectional light distribution in line with the Energy Star certification, using most standard dimmers, dimming can be fully applied to the closure.

It is reported that after the installation of this LED bulb, which may be substituted at 2700K and 5000K warm white daylight respectively 40W, incandescent and produces 460lm 60W, can produce 815lm incandescent. Preliminary estimates energy savings of up to 85%.

Even to give users increased confidence to buy, Cree official said that this product has no reason to refund guarantee. If this LED bulbs are not satisfied, then you can directly refund.

4Foot 18W LED Tube Light

4Foot-18W-LED-Tube-Light

Our T8 4 foot LED tubes has a power consumption of 18W and comes in the following color temperatures: 4000K, 5000K, and 6000K. They are really power saving and eco-friendly bulbs with a lifespan up to 35,000 hours or more and will save you at least 60% in power consumption than the fluorescent light will.

4Foot 18W LED Tube Light Specification:

Certification: CE, FCC, RoHS
Size: T8 (1″ x 48″ // 25.4 mm x 1219.2 mm)
Watts: 18
Lumens: 100lm/w (lumens per watt)
Color: 6000K, 5000K
Trim: Clear, Frosted
Beam Angle (°): 180
CRI: >75
Input Voltage: 100-277V
Lifespan: 35,000+ hours
Base: g13
Warranty: 1 year
Quantity/box: 25
Wiring: Two Ended

Buying factors of LED lighting products analysis

LED lighting as an important branch of the lighting industry, because of its higher price than conventional lighting it is currently the main market is still focused on government procurement, particularly the countries continue to strengthen the energy saving policy, the Government of LED lights, LED tunnel lights, traffic track, Landscape construction and other infrastructure needs of energy-efficient lighting procurement increased year by year. Although there are many LED companies began to get involved in LED indoor lighting, but the main consumer market, the primary market of government procurement has not changed, it is more likely semiconductor lighting industrial marketing, the brand promotion is also the marketing of industrial goods the Lord.

Buying factors of LED lighting products analysis

1, The purchase of professional

Customers purchasing LED lighting products, technical indicators, specifications, application, etc. have high requirements, usually through professional knowledge and experienced procurement staff to complete full-time, large turnover, a very important product will convene engineering, Technical Department, the Finance Ministry and the business leaders and other components procurement group, shared decision-making.

2. The purchase purpose

LED lighting products customers purchase the purpose is very strong, product procurement cycle, procurement plans have strict quantity, relevance, the purpose is very strong.

3, Intellectual property of purchase

Customers buy LED lighting products will be carefully understand vendor strength; the quality of the product, category, technical parameters, price, service and supply cycle; model demonstration application projects. They tend to compare the product quality, price and brand. After a lot of comparison, screening, before making a decision after weighing.

4, Personal nature of purchase

Purchasing decisions because people tend to participate in more than one, each person has their own background knowledge, personality traits, life background, so each person’s purchase request will be biased, have their own buy “personality”, so suppliers We should learn to grasp the personality characteristics of customers, take the appropriate public relations strategy.

30W Motion Sensor Security Light 2100lm Super Bright

30W Motion Sensor Security Light 2100lm Super Bright

30W Motion Sensor Security Light, 2100lm Super Bright 75W HPS Equivalent Security Flood Light PIR, Daylight White

30W Motion Sensor Security Light 2100lm Super Bright Specification:

Brightness(lm)
2100
 LED Quantity
1
Light Color
Daylight White
 Color Temperature (K)
6000
Dimmable
Non-dimmable
 CRI
> 70
Beam Angle (Degree)
120
 Input Voltage (v)
100-240 AC
Frequency (hz)
50/60
 Power Factor
> 0.9
Length (in)
8.858
 Width (in)
4.134
Height (in)
9.646
 Net Weight (lb)
2.932
Shock Proof
Yes
 Waterproof
Yes
Protection Rating
IP65
 Certification
CE, RoHS
Package Quantity
Pack of 1 Unit
 Warranty
2 Years

30W Motion Sensor Security Light 2100lm Super Bright Features:

With the setting of steady lighting mode, it can be used as general flood lights.
Save electricity bill. Replace 75W HPS (High Pressure Sodium) bulb by 30W LED. Save 60% on electricity bill of lighting
Smart and sensitive detector. This light will automatically turns on at night when motion is detected
With the setting of steady lighting mode, it can be used as general flood lights.
Maintenance Free. Extremely long life reduces re-lamp frequency. Save labor cost to replace bulbs with short lifespan.
Waterproof. IP65. 
Fully customized setting. The illumination time, sensor sensitivity, beam and sensor direction are all adjustable.
Wide beam angle. Create super bright, shadow-free security and wide beam distribution for general purpose flood lighting.
Durable housing. Rugged die-cast aluminum, scratch and fade resistant. Excellent appearance.
Tempered Glass. Safe and extremely high light transmittance
Eco-Friendly. No lead or mercury

A new method to improve the efficiency of the LED light has been released

Aalto University and the National Technical Research Centre of Finland (VTT) researchers have successfully developed a method that can improve the relative uncertainty of measurement of LED luminous efficiency is reduced from the current 5 percent to around after 1 %.

A new method to improve the efficiency of the LED light has been released

Aalto University doctoral student in the school Tomi Pulli pointed out that, so far, based on solutions that have been applied to incandescent photometric studies, such as the human eye were measured with light detection.

Luminaire manufacturers have a lot of production equipment used to calibrate the photometer incandescent, however, there will be an error when measuring with this LED light efficiency. In this study, the researchers used was a clearly defined spectrum LED lights and a PQED detector. This detector consists of the group of researchers, VTT Finland Metrology and Calibration Centre (MIKES Metrology) and other European partners from developed, can be highly accurately measured spectral response rate. Therefore, difficult without the use of incandescent light filter applications. According Pulli revealed precise LED spectra are measured and analyzed in this study some of the most challenging and the most critical.

Pulli and co-investigator in the study will be measured using a detector LED light intensity within a small range. The study leader Professor Erkki Ikonen said the next step will be measured under real-life lighting conditions, light intensity.

LED lights can be 360-degree light. To determine the effect of light, the researchers used a device called an integrating sphere is used to test light from different directions. However, they are its practical effects and aging properties are still poorly understood. In fact, researchers must determine as accurately as possible luminous efficiency, so that high-efficiency (as much energy into useful pairs of human eyes light) LED lights can be listed as soon as possible.

Ikonen said that until now, the proportion of LED lights in the world is only 10%, but their number is increasing rapidly.

It is reported that the global lighting equipment accounted for about 20% of electricity consumption. Once the LED’s market share increased to 50%, if the LED light efficiency increased by 1%, then this means that each year will save billions of euros.

4W Dimmable GU10 LED Bulbs

4W Dimmable GU10 LED Bulbs

4W Dimmable GU10 LED Bulbs  45° Spotlight  210lm Warm White

4W Dimmable GU10 LED Bulbs Specification:

Brand
Ene
 Wattage(W)
4
Dimmable
Dimmable
 Rated lifetime (h)
50,000
Switching Cycles
25000
 Brightness(lm)
210
Halogen Equivalent(W)
35
 Light Color
Warm White
Color Temperature (K)
3000
 CRI
> 75
Beam Angle (Degree)
45
 Input Voltage (v)
120
Frequency (hz)
60
 Bulb Shape
MR16
Base Type
GU10
 Diameter (in)
1.97
Length (in)
2.07
 Lifespan (h)
50000
Net Weight (lb)
0.11
 Package Quantity
Pack of 1 Unit
Applications
Architectural Lighting, Decor Lighting, Display Case Lighting, Gallery Lighting, Museum Lighting, Office Lighting, Shopping Mall Lighting, Spot Lighting, Store Lighting, Track Lighting
 Certification
CE, RoHS, FCC
Warranty
5 Years

4W Dimmable GU10 LED Bulbs Features:

Energy Saving: Replace 35W halogen bulb by 4W LED. (please note, the wattage of this light is 4w, the wattage of the LED inside is 3w). Save over 85% energy.

Dimmable: Works with most of dimmers but to ensure flicker free dimming, please use with silicon-controlled rectifier (SRC) type dimmer.

Easy Installation: Standard MR16 shape with GU10 base. Can be easily fitted instead of ordinary MR16 halogen bulbs.

Eco-Friendly: No lead or mercury

Extremely long life: Lowers maintenance costs by reducing re-lamp frequency.

Solid State: Shockproof and vibration proof

No Hazardous Emissions: No UV or IR Radiation

15W BR30 E26 LED Flood Light Bulb

15W BR30 E26 LED Flood Light Bulb

1100lm, Warm White, 75W Incandescent Bulbs Equiv, 110° Flood Beam, Pack of 2 Units, LED Recessed Can Lights

15W BR30 E26 LED Flood Light Bulb Specification:

Wattage(W)
15
 Dimmable
Non-dimmable
Rated lifetime (h)
50000
 Color Consistency (SDCM)
< 6
Brightness(lm)
1100
 Incandescent Equivalent(W)
75
LED Quantity
30
 Light Color
Warm White
Color Temperature (K)
2700
 CRI
> 80
Beam Angle (Degree)
110
 Input Voltage (v)
120 AC
Frequency (hz)
60
 Power Factor
>0.5
Bulb Shape
BR30
 Base Type
E26 Medium Screw
Diameter (in)
3.74
 Height (in)
5.1378
Net Weight (lb)
0.55
 Package Quantity
Pack of 2 Units
Certification
ISO90012008
 Warranty
5 Years

15W BR30 E26 LED Flood Light Bulb Features:

Save electricity bill. Replace 75W incandescent bulb by 15W LED. Save over 80% on electricity bill of lighting.
Easy Installation. Standard BR30 shape with E26 base, which can be easily fitted to replace regular BR30 incandescent bulbs.
Flood beam angle. Beam angle is 110°, which is perfect for residential and commercial lighting.
Maintenance Free. Extremely long life LED bulbs in it, save cost to replace bulbs with short lifespan.
Instant full light. The starting time is less than 0.5 s, no need to wait for warming up the lamp.
Eco-Friendly. No lead or mercury.
Solid State. Shockproof and vibration proof.
No Hazardous Emissions. No UV or IR Radiation.
Input Voltage: 120 V AC.